Description:
The 6N135, 6N136, EL4502 and EL4503 devices each consist of an infrared emitting diode, optically
coupled to a high speed photo detector transistor. A separate connection for the photodiode bias
and output-transistor collector increase the speed by several orders of magnitude over conventional
phototransistor couplers by reducing the base-collector capacitance of the input transistor. The
devices are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option
Features:
High speed 1Mbit/s
High isolation voltage between input and output (Viso=5000 Vrms )
Guaranteed performance from 0°C to 70°C
Wide operating temperature range of -55°C to 100°C
Pb free and RoHS compliant
UL and cUL approved(No. E214129)
VDE approved (No. 132249)
SEMKO approved
NEMKO approved
DEMKO approved
FIMKO approved
Applications:
Line receivers
Telecommunication equipments
Power transistor isolation in motor drives
Replacement for low speed phototransistor photo couplers
Feedback loop in switch-mode power supplies
Home appliances
High speed logic ground isolation
Package | 8-Pin DIP |
Mounting | SMD |
Type | 1Mbps |
Number of Pins | 8Pins |
Length | 9.7mm |
Width | 6.6mm |
Height | 3.5mm |
Number of Channels | Single |
Max. Forward current | 25mA |
Max. Forward Voltage | 1.8V |
Min. CTR | 7% |
Min. CMTI | 1kV/uS |
Max. Propagation Delay Tplh | 1.5uS |
Max. CTR | 50% |
Common Mode Transient Immunity at High (CMH) | 1kV/uS |
Min. Isolation Voltage | 5000V |
Max. Saturation Voltage Vce | 0.4V |
Max. Power Dissipation | 100mW |
Min. Operating Temp. | -55C |
Max. Operating Temp. | 100C |
Packaging | Tape & Reel |
Min. Storage Temp. | -55C |
Max. Storage Temp. | 125C |
* required fields