ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('6521_ASM','2013-11-14T',('kenchen'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009360',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009360','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=DIRECTION('',(0.E0,0.E0,1.E0));
#2=VECTOR('',#1,1.4E0);
#3=CARTESIAN_POINT('',(-1.E0,0.E0,-7.E-1));
#4=LINE('',#3,#2);
#5=DIRECTION('',(1.E0,0.E0,0.E0));
#6=VECTOR('',#5,2.E0);
#7=CARTESIAN_POINT('',(-1.E0,0.E0,7.E-1));
#8=LINE('',#7,#6);
#9=DIRECTION('',(0.E0,0.E0,-1.E0));
#10=VECTOR('',#9,1.4E0);
#11=CARTESIAN_POINT('',(1.E0,0.E0,7.E-1));
#12=LINE('',#11,#10);
#13=DIRECTION('',(-1.E0,0.E0,0.E0));
#14=VECTOR('',#13,2.E0);
#15=CARTESIAN_POINT('',(1.E0,0.E0,-7.E-1));
#16=LINE('',#15,#14);
#17=DIRECTION('',(1.E0,0.E0,0.E0));
#18=VECTOR('',#17,1.96E0);
#19=CARTESIAN_POINT('',(-9.8E-1,0.E0,-6.8E-1));
#20=LINE('',#19,#18);
#21=DIRECTION('',(0.E0,0.E0,1.E0));
#22=VECTOR('',#21,1.36E0);
#23=CARTESIAN_POINT('',(9.8E-1,0.E0,-6.8E-1));
#24=LINE('',#23,#22);
#25=DIRECTION('',(-1.E0,0.E0,0.E0));
#26=VECTOR('',#25,1.96E0);
#27=CARTESIAN_POINT('',(9.8E-1,0.E0,6.8E-1));
#28=LINE('',#27,#26);
#29=DIRECTION('',(0.E0,0.E0,-1.E0));
#30=VECTOR('',#29,1.36E0);
#31=CARTESIAN_POINT('',(-9.8E-1,0.E0,6.8E-1));
#32=LINE('',#31,#30);
#33=DIRECTION('',(3.333716739289E-2,9.546515691976E-1,2.958530288822E-1));
#34=VECTOR('',#33,7.261835181408E-1);
#35=CARTESIAN_POINT('',(-9.945262474342E-1,1.567477648815E-1,
-6.945262474342E-1));
#36=LINE('',#35,#34);
#37=DIRECTION('',(3.487826274238E-2,9.987827659587E-1,3.487826274238E-2));
#38=VECTOR('',#37,1.569387961265E-1);
#39=CARTESIAN_POINT('',(-1.E0,0.E0,-7.E-1));
#40=LINE('',#39,#38);
#41=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
#42=VECTOR('',#41,2.695981666929E-1);
#43=CARTESIAN_POINT('',(-9.703173459320E-1,8.5E-1,-4.796826540680E-1));
#44=LINE('',#43,#42);
#45=DIRECTION('',(-1.E0,0.E0,0.E0));
#46=VECTOR('',#45,1.75E0);
#47=CARTESIAN_POINT('',(9.703173459320E-1,8.5E-1,-6.703173459320E-1));
#48=LINE('',#47,#46);
#49=DIRECTION('',(0.E0,0.E0,-1.E0));
#50=VECTOR('',#49,1.340634691864E0);
#51=CARTESIAN_POINT('',(9.703173459320E-1,8.5E-1,6.703173459320E-1));
#52=LINE('',#51,#50);
#53=DIRECTION('',(1.E0,0.E0,0.E0));
#54=VECTOR('',#53,1.940634691864E0);
#55=CARTESIAN_POINT('',(-9.703173459320E-1,8.5E-1,6.703173459320E-1));
#56=LINE('',#55,#54);
#57=DIRECTION('',(0.E0,0.E0,1.E0));
#58=VECTOR('',#57,1.15E0);
#59=CARTESIAN_POINT('',(-9.703173459320E-1,8.5E-1,-4.796826540680E-1));
#60=LINE('',#59,#58);
#61=CARTESIAN_POINT('',(3.E-1,8.5E-1,0.E0));
#62=DIRECTION('',(0.E0,1.E0,0.E0));
#63=DIRECTION('',(0.E0,0.E0,1.E0));
#64=AXIS2_PLACEMENT_3D('',#61,#62,#63);
#66=DIRECTION('',(-1.E0,0.E0,0.E0));
#67=VECTOR('',#66,6.E-1);
#68=CARTESIAN_POINT('',(3.E-1,8.5E-1,-5.5E-1));
#69=LINE('',#68,#67);
#70=CARTESIAN_POINT('',(-3.E-1,8.5E-1,0.E0));
#71=DIRECTION('',(0.E0,1.E0,0.E0));
#72=DIRECTION('',(0.E0,0.E0,-1.E0));
#73=AXIS2_PLACEMENT_3D('',#70,#71,#72);
#75=DIRECTION('',(1.E0,0.E0,0.E0));
#76=VECTOR('',#75,6.E-1);
#77=CARTESIAN_POINT('',(-3.E-1,8.5E-1,5.5E-1));
#78=LINE('',#77,#76);
#79=DIRECTION('',(2.958530288822E-1,9.546515691976E-1,3.333716739289E-2));
#80=VECTOR('',#79,7.261835181408E-1);
#81=CARTESIAN_POINT('',(-9.945262474342E-1,1.567477648815E-1,
-6.945262474342E-1));
#82=LINE('',#81,#80);
#83=DIRECTION('',(-3.487826274237E-2,9.987827659587E-1,3.487826274237E-2));
#84=VECTOR('',#83,8.510359098799E-1);
#85=CARTESIAN_POINT('',(1.E0,0.E0,-7.E-1));
#86=LINE('',#85,#84);
#87=DIRECTION('',(-3.487826274237E-2,9.987827659587E-1,-3.487826274237E-2));
#88=VECTOR('',#87,8.510359098799E-1);
#89=CARTESIAN_POINT('',(1.E0,0.E0,7.E-1));
#90=LINE('',#89,#88);
#91=DIRECTION('',(3.487826274237E-2,9.987827659587E-1,-3.487826274237E-2));
#92=VECTOR('',#91,8.510359098799E-1);
#93=CARTESIAN_POINT('',(-1.E0,0.E0,7.E-1));
#94=LINE('',#93,#92);
#95=DIRECTION('',(0.E0,-1.E0,0.E0));
#96=VECTOR('',#95,3.E-2);
#97=CARTESIAN_POINT('',(3.E-1,8.5E-1,5.5E-1));
#98=LINE('',#97,#96);
#99=DIRECTION('',(0.E0,-1.E0,0.E0));
#100=VECTOR('',#99,3.E-2);
#101=CARTESIAN_POINT('',(-3.E-1,8.5E-1,5.5E-1));
#102=LINE('',#101,#100);
#103=DIRECTION('',(0.E0,-1.E0,0.E0));
#104=VECTOR('',#103,3.E-2);
#105=CARTESIAN_POINT('',(-3.E-1,8.5E-1,-5.5E-1));
#106=LINE('',#105,#104);
#107=DIRECTION('',(0.E0,-1.E0,0.E0));
#108=VECTOR('',#107,3.E-2);
#109=CARTESIAN_POINT('',(3.E-1,8.5E-1,-5.5E-1));
#110=LINE('',#109,#108);
#111=CARTESIAN_POINT('',(3.E-1,8.2E-1,0.E0));
#112=DIRECTION('',(0.E0,1.E0,0.E0));
#113=DIRECTION('',(0.E0,0.E0,1.E0));
#114=AXIS2_PLACEMENT_3D('',#111,#112,#113);
#116=DIRECTION('',(1.E0,0.E0,0.E0));
#117=VECTOR('',#116,6.E-1);
#118=CARTESIAN_POINT('',(-3.E-1,8.2E-1,5.5E-1));
#119=LINE('',#118,#117);
#120=CARTESIAN_POINT('',(-3.E-1,8.2E-1,0.E0));
#121=DIRECTION('',(0.E0,1.E0,0.E0));
#122=DIRECTION('',(0.E0,0.E0,-1.E0));
#123=AXIS2_PLACEMENT_3D('',#120,#121,#122);
#125=DIRECTION('',(-1.E0,0.E0,0.E0));
#126=VECTOR('',#125,6.E-1);
#127=CARTESIAN_POINT('',(3.E-1,8.2E-1,-5.5E-1));
#128=LINE('',#127,#126);
#129=DIRECTION('',(-7.068913075832E-1,-7.068913075832E-1,2.468518840783E-2));
#130=VECTOR('',#129,7.073223204703E-2);
#131=CARTESIAN_POINT('',(6.E-1,-4.E-1,-6.660316922033E-1));
#132=LINE('',#131,#130);
#133=DIRECTION('',(-1.E0,0.E0,0.E0));
#134=VECTOR('',#133,3.660316922033E-1);
#135=CARTESIAN_POINT('',(9.660316922033E-1,-4.E-1,-6.660316922033E-1));
#136=LINE('',#135,#134);
#137=DIRECTION('',(3.487826274238E-2,-9.987827659587E-1,3.487826274237E-2));
#138=VECTOR('',#137,4.004874870023E-1);
#139=CARTESIAN_POINT('',(-9.8E-1,0.E0,-6.8E-1));
#140=LINE('',#139,#138);
#141=DIRECTION('',(1.E0,0.E0,0.E0));
#142=VECTOR('',#141,3.660316922033E-1);
#143=CARTESIAN_POINT('',(-9.660316922033E-1,-4.E-1,-6.660316922033E-1));
#144=LINE('',#143,#142);
#145=DIRECTION('',(-7.068913075832E-1,7.068913075832E-1,-2.468518840783E-2));
#146=VECTOR('',#145,7.073223204703E-2);
#147=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,-6.642856537287E-1));
#148=LINE('',#147,#146);
#149=DIRECTION('',(0.E0,0.E0,1.E0));
#150=VECTOR('',#149,1.332063384407E0);
#151=CARTESIAN_POINT('',(6.E-1,-4.E-1,-6.660316922033E-1));
#152=LINE('',#151,#150);
#153=DIRECTION('',(0.E0,0.E0,1.E0));
#154=VECTOR('',#153,1.328571307457E0);
#155=CARTESIAN_POINT('',(5.5E-1,-4.5E-1,-6.642856537287E-1));
#156=LINE('',#155,#154);
#157=DIRECTION('',(1.E0,0.E0,0.E0));
#158=VECTOR('',#157,1.1E0);
#159=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,-6.642856537287E-1));
#160=LINE('',#159,#158);
#161=DIRECTION('',(0.E0,0.E0,1.E0));
#162=VECTOR('',#161,1.328571307457E0);
#163=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,-6.642856537287E-1));
#164=LINE('',#163,#162);
#165=DIRECTION('',(-1.E0,0.E0,0.E0));
#166=VECTOR('',#165,1.1E0);
#167=CARTESIAN_POINT('',(5.5E-1,-4.5E-1,6.642856537287E-1));
#168=LINE('',#167,#166);
#169=CARTESIAN_POINT('',(0.E0,-4.5E-1,0.E0));
#170=DIRECTION('',(0.E0,-1.E0,0.E0));
#171=DIRECTION('',(1.E0,0.E0,0.E0));
#172=AXIS2_PLACEMENT_3D('',#169,#170,#171);
#174=CARTESIAN_POINT('',(0.E0,-4.5E-1,0.E0));
#175=DIRECTION('',(0.E0,-1.E0,0.E0));
#176=DIRECTION('',(-1.E0,0.E0,0.E0));
#177=AXIS2_PLACEMENT_3D('',#174,#175,#176);
#179=DIRECTION('',(0.E0,0.E0,1.E0));
#180=VECTOR('',#179,1.332063384407E0);
#181=CARTESIAN_POINT('',(-6.E-1,-4.E-1,-6.660316922033E-1));
#182=LINE('',#181,#180);
#183=DIRECTION('',(0.E0,0.E0,-1.E0));
#184=VECTOR('',#183,1.332063384407E0);
#185=CARTESIAN_POINT('',(-9.660316922033E-1,-4.E-1,6.660316922033E-1));
#186=LINE('',#185,#184);
#187=DIRECTION('',(3.487826274237E-2,-9.987827659587E-1,-3.487826274237E-2));
#188=VECTOR('',#187,4.004874870023E-1);
#189=CARTESIAN_POINT('',(-9.8E-1,0.E0,6.8E-1));
#190=LINE('',#189,#188);
#191=DIRECTION('',(-7.068913075832E-1,-7.068913075832E-1,-2.468518840783E-2));
#192=VECTOR('',#191,7.073223204703E-2);
#193=CARTESIAN_POINT('',(6.E-1,-4.E-1,6.660316922033E-1));
#194=LINE('',#193,#192);
#195=DIRECTION('',(-7.068913075832E-1,7.068913075832E-1,2.468518840783E-2));
#196=VECTOR('',#195,7.073223204703E-2);
#197=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,6.642856537287E-1));
#198=LINE('',#197,#196);
#199=DIRECTION('',(1.E0,0.E0,0.E0));
#200=VECTOR('',#199,3.660316922033E-1);
#201=CARTESIAN_POINT('',(-9.660316922033E-1,-4.E-1,6.660316922033E-1));
#202=LINE('',#201,#200);
#203=DIRECTION('',(-3.487826274238E-2,-9.987827659587E-1,-3.487826274237E-2));
#204=VECTOR('',#203,4.004874870023E-1);
#205=CARTESIAN_POINT('',(9.8E-1,0.E0,6.8E-1));
#206=LINE('',#205,#204);
#207=DIRECTION('',(-1.E0,0.E0,0.E0));
#208=VECTOR('',#207,3.660316922033E-1);
#209=CARTESIAN_POINT('',(9.660316922033E-1,-4.E-1,6.660316922033E-1));
#210=LINE('',#209,#208);
#211=DIRECTION('',(0.E0,0.E0,1.E0));
#212=VECTOR('',#211,1.332063384407E0);
#213=CARTESIAN_POINT('',(9.660316922033E-1,-4.E-1,-6.660316922033E-1));
#214=LINE('',#213,#212);
#215=DIRECTION('',(-3.487826274237E-2,-9.987827659587E-1,3.487826274237E-2));
#216=VECTOR('',#215,4.004874870023E-1);
#217=CARTESIAN_POINT('',(9.8E-1,0.E0,-6.8E-1));
#218=LINE('',#217,#216);
#219=DIRECTION('',(5.840094509503E-1,8.117468578324E-1,0.E0));
#220=VECTOR('',#219,1.163292513113E-1);
#221=CARTESIAN_POINT('',(-3.E-1,-4.5E-1,0.E0));
#222=LINE('',#221,#220);
#223=DIRECTION('',(-5.840094509503E-1,8.117468578324E-1,0.E0));
#224=VECTOR('',#223,1.163292513113E-1);
#225=CARTESIAN_POINT('',(3.E-1,-4.5E-1,0.E0));
#226=LINE('',#225,#224);
#227=CARTESIAN_POINT('',(0.E0,-3.555700957740E-1,0.E0));
#228=DIRECTION('',(0.E0,-1.E0,0.E0));
#229=DIRECTION('',(-1.E0,0.E0,0.E0));
#230=AXIS2_PLACEMENT_3D('',#227,#228,#229);
#232=CARTESIAN_POINT('',(0.E0,-3.555700957740E-1,0.E0));
#233=DIRECTION('',(0.E0,1.E0,0.E0));
#234=DIRECTION('',(-1.E0,0.E0,0.E0));
#235=AXIS2_PLACEMENT_3D('',#232,#233,#234);
#237=CARTESIAN_POINT('',(0.E0,-3.555700957740E-1,0.E0));
#238=DIRECTION('',(0.E0,1.E0,0.E0));
#239=DIRECTION('',(-1.E0,0.E0,0.E0));
#240=AXIS2_PLACEMENT_3D('',#237,#238,#239);
#242=DIRECTION('',(0.E0,1.E0,0.E0));
#243=VECTOR('',#242,4.442990422597E-2);
#244=CARTESIAN_POINT('',(1.5E-1,-4.E-1,0.E0));
#245=LINE('',#244,#243);
#246=CARTESIAN_POINT('',(0.E0,-3.555700957740E-1,0.E0));
#247=DIRECTION('',(0.E0,-1.E0,0.E0));
#248=DIRECTION('',(-1.E0,0.E0,0.E0));
#249=AXIS2_PLACEMENT_3D('',#246,#247,#248);
#251=DIRECTION('',(0.E0,1.E0,0.E0));
#252=VECTOR('',#251,4.442990422597E-2);
#253=CARTESIAN_POINT('',(-1.5E-1,-4.E-1,0.E0));
#254=LINE('',#253,#252);
#255=CARTESIAN_POINT('',(0.E0,-4.E-1,0.E0));
#256=DIRECTION('',(0.E0,-1.E0,0.E0));
#257=DIRECTION('',(-1.E0,0.E0,0.E0));
#258=AXIS2_PLACEMENT_3D('',#255,#256,#257);
#260=CARTESIAN_POINT('',(0.E0,-4.E-1,0.E0));
#261=DIRECTION('',(0.E0,1.E0,0.E0));
#262=DIRECTION('',(-1.E0,0.E0,0.E0));
#263=AXIS2_PLACEMENT_3D('',#260,#261,#262);
#265=CARTESIAN_POINT('',(-1.E0,0.E0,-7.E-1));
#266=CARTESIAN_POINT('',(-1.E0,0.E0,7.E-1));
#267=VERTEX_POINT('',#265);
#268=VERTEX_POINT('',#266);
#269=CARTESIAN_POINT('',(1.E0,0.E0,7.E-1));
#270=VERTEX_POINT('',#269);
#271=CARTESIAN_POINT('',(1.E0,0.E0,-7.E-1));
#272=VERTEX_POINT('',#271);
#273=CARTESIAN_POINT('',(-9.703173459320E-1,8.5E-1,6.703173459320E-1));
#274=CARTESIAN_POINT('',(9.703173459320E-1,8.5E-1,6.703173459320E-1));
#275=VERTEX_POINT('',#273);
#276=VERTEX_POINT('',#274);
#277=CARTESIAN_POINT('',(9.703173459320E-1,8.5E-1,-6.703173459320E-1));
#278=VERTEX_POINT('',#277);
#279=CARTESIAN_POINT('',(-9.8E-1,0.E0,-6.8E-1));
#280=CARTESIAN_POINT('',(9.8E-1,0.E0,-6.8E-1));
#281=VERTEX_POINT('',#279);
#282=VERTEX_POINT('',#280);
#283=CARTESIAN_POINT('',(9.8E-1,0.E0,6.8E-1));
#284=VERTEX_POINT('',#283);
#285=CARTESIAN_POINT('',(-9.8E-1,0.E0,6.8E-1));
#286=VERTEX_POINT('',#285);
#287=CARTESIAN_POINT('',(-9.703173459320E-1,8.5E-1,-4.796826540680E-1));
#288=CARTESIAN_POINT('',(-7.796826540680E-1,8.5E-1,-6.703173459320E-1));
#289=VERTEX_POINT('',#287);
#290=VERTEX_POINT('',#288);
#291=CARTESIAN_POINT('',(-9.945262474342E-1,1.567477648815E-1,
-6.945262474342E-1));
#292=VERTEX_POINT('',#291);
#293=CARTESIAN_POINT('',(3.E-1,8.2E-1,5.5E-1));
#294=CARTESIAN_POINT('',(3.E-1,8.2E-1,-5.5E-1));
#295=VERTEX_POINT('',#293);
#296=VERTEX_POINT('',#294);
#297=CARTESIAN_POINT('',(-3.E-1,8.2E-1,-5.5E-1));
#298=VERTEX_POINT('',#297);
#299=CARTESIAN_POINT('',(-3.E-1,8.2E-1,5.5E-1));
#300=VERTEX_POINT('',#299);
#301=CARTESIAN_POINT('',(3.E-1,8.5E-1,5.5E-1));
#302=CARTESIAN_POINT('',(3.E-1,8.5E-1,-5.5E-1));
#303=VERTEX_POINT('',#301);
#304=VERTEX_POINT('',#302);
#305=CARTESIAN_POINT('',(-3.E-1,8.5E-1,-5.5E-1));
#306=VERTEX_POINT('',#305);
#307=CARTESIAN_POINT('',(-3.E-1,8.5E-1,5.5E-1));
#308=VERTEX_POINT('',#307);
#309=CARTESIAN_POINT('',(5.5E-1,-4.5E-1,-6.642856537287E-1));
#310=CARTESIAN_POINT('',(5.5E-1,-4.5E-1,6.642856537287E-1));
#311=VERTEX_POINT('',#309);
#312=VERTEX_POINT('',#310);
#313=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,-6.642856537287E-1));
#314=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,6.642856537287E-1));
#315=VERTEX_POINT('',#313);
#316=VERTEX_POINT('',#314);
#317=CARTESIAN_POINT('',(6.E-1,-4.E-1,-6.660316922033E-1));
#318=VERTEX_POINT('',#317);
#319=CARTESIAN_POINT('',(9.660316922033E-1,-4.E-1,-6.660316922033E-1));
#320=VERTEX_POINT('',#319);
#321=CARTESIAN_POINT('',(-9.660316922033E-1,-4.E-1,-6.660316922033E-1));
#322=CARTESIAN_POINT('',(-6.E-1,-4.E-1,-6.660316922033E-1));
#323=VERTEX_POINT('',#321);
#324=VERTEX_POINT('',#322);
#325=CARTESIAN_POINT('',(9.660316922033E-1,-4.E-1,6.660316922033E-1));
#326=VERTEX_POINT('',#325);
#327=CARTESIAN_POINT('',(6.E-1,-4.E-1,6.660316922033E-1));
#328=VERTEX_POINT('',#327);
#329=CARTESIAN_POINT('',(-9.660316922033E-1,-4.E-1,6.660316922033E-1));
#330=CARTESIAN_POINT('',(-6.E-1,-4.E-1,6.660316922033E-1));
#331=VERTEX_POINT('',#329);
#332=VERTEX_POINT('',#330);
#333=CARTESIAN_POINT('',(1.5E-1,-4.E-1,0.E0));
#334=CARTESIAN_POINT('',(1.5E-1,-3.555700957740E-1,0.E0));
#335=VERTEX_POINT('',#333);
#336=VERTEX_POINT('',#334);
#337=CARTESIAN_POINT('',(-1.5E-1,-4.E-1,0.E0));
#338=CARTESIAN_POINT('',(-1.5E-1,-3.555700957740E-1,0.E0));
#339=VERTEX_POINT('',#337);
#340=VERTEX_POINT('',#338);
#341=CARTESIAN_POINT('',(-2.320626178122E-1,-3.555700957740E-1,0.E0));
#342=CARTESIAN_POINT('',(2.320626178122E-1,-3.555700957740E-1,0.E0));
#343=VERTEX_POINT('',#341);
#344=VERTEX_POINT('',#342);
#345=CARTESIAN_POINT('',(3.E-1,-4.5E-1,0.E0));
#346=CARTESIAN_POINT('',(-3.E-1,-4.5E-1,0.E0));
#347=VERTEX_POINT('',#345);
#348=VERTEX_POINT('',#346);
#349=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#350=DIRECTION('',(0.E0,1.E0,0.E0));
#351=DIRECTION('',(1.E0,0.E0,0.E0));
#352=AXIS2_PLACEMENT_3D('',#349,#350,#351);
#353=PLANE('',#352);
#355=ORIENTED_EDGE('',*,*,#354,.T.);
#357=ORIENTED_EDGE('',*,*,#356,.T.);
#359=ORIENTED_EDGE('',*,*,#358,.T.);
#361=ORIENTED_EDGE('',*,*,#360,.T.);
#362=EDGE_LOOP('',(#355,#357,#359,#361));
#363=FACE_OUTER_BOUND('',#362,.F.);
#365=ORIENTED_EDGE('',*,*,#364,.T.);
#367=ORIENTED_EDGE('',*,*,#366,.T.);
#369=ORIENTED_EDGE('',*,*,#368,.T.);
#371=ORIENTED_EDGE('',*,*,#370,.T.);
#372=EDGE_LOOP('',(#365,#367,#369,#371));
#373=FACE_BOUND('',#372,.F.);
#375=CARTESIAN_POINT('',(-1.E0,0.E0,-7.E-1));
#376=DIRECTION('',(-9.993908270191E-1,3.489949670250E-2,0.E0));
#377=DIRECTION('',(0.E0,0.E0,1.E0));
#378=AXIS2_PLACEMENT_3D('',#375,#376,#377);
#379=PLANE('',#378);
#381=ORIENTED_EDGE('',*,*,#380,.T.);
#383=ORIENTED_EDGE('',*,*,#382,.T.);
#385=ORIENTED_EDGE('',*,*,#384,.F.);
#386=ORIENTED_EDGE('',*,*,#354,.F.);
#388=ORIENTED_EDGE('',*,*,#387,.T.);
#389=EDGE_LOOP('',(#381,#383,#385,#386,#388));
#390=FACE_OUTER_BOUND('',#389,.F.);
#392=CARTESIAN_POINT('',(-1.E0,8.5E-1,-4.5E-1));
#393=DIRECTION('',(-6.869800860347E-1,2.368896848396E-1,-6.869800860347E-1));
#394=DIRECTION('',(1.675063025432E-1,9.715365547506E-1,1.675063025432E-1));
#395=AXIS2_PLACEMENT_3D('',#392,#393,#394);
#396=PLANE('',#395);
#398=ORIENTED_EDGE('',*,*,#397,.F.);
#399=ORIENTED_EDGE('',*,*,#380,.F.);
#401=ORIENTED_EDGE('',*,*,#400,.T.);
#402=EDGE_LOOP('',(#398,#399,#401));
#403=FACE_OUTER_BOUND('',#402,.F.);
#405=CARTESIAN_POINT('',(0.E0,8.5E-1,0.E0));
#406=DIRECTION('',(0.E0,1.E0,0.E0));
#407=DIRECTION('',(1.E0,0.E0,0.E0));
#408=AXIS2_PLACEMENT_3D('',#405,#406,#407);
#409=PLANE('',#408);
#410=ORIENTED_EDGE('',*,*,#397,.T.);
#412=ORIENTED_EDGE('',*,*,#411,.F.);
#414=ORIENTED_EDGE('',*,*,#413,.F.);
#416=ORIENTED_EDGE('',*,*,#415,.F.);
#417=ORIENTED_EDGE('',*,*,#382,.F.);
#418=EDGE_LOOP('',(#410,#412,#414,#416,#417));
#419=FACE_OUTER_BOUND('',#418,.F.);
#421=ORIENTED_EDGE('',*,*,#420,.T.);
#423=ORIENTED_EDGE('',*,*,#422,.T.);
#425=ORIENTED_EDGE('',*,*,#424,.T.);
#427=ORIENTED_EDGE('',*,*,#426,.T.);
#428=EDGE_LOOP('',(#421,#423,#425,#427));
#429=FACE_BOUND('',#428,.F.);
#431=CARTESIAN_POINT('',(1.E0,0.E0,-7.E-1));
#432=DIRECTION('',(0.E0,3.489949670250E-2,-9.993908270191E-1));
#433=DIRECTION('',(-1.E0,0.E0,0.E0));
#434=AXIS2_PLACEMENT_3D('',#431,#432,#433);
#435=PLANE('',#434);
#436=ORIENTED_EDGE('',*,*,#400,.F.);
#437=ORIENTED_EDGE('',*,*,#387,.F.);
#438=ORIENTED_EDGE('',*,*,#360,.F.);
#440=ORIENTED_EDGE('',*,*,#439,.T.);
#441=ORIENTED_EDGE('',*,*,#411,.T.);
#442=EDGE_LOOP('',(#436,#437,#438,#440,#441));
#443=FACE_OUTER_BOUND('',#442,.F.);
#445=CARTESIAN_POINT('',(1.E0,0.E0,7.E-1));
#446=DIRECTION('',(9.993908270191E-1,3.489949670250E-2,0.E0));
#447=DIRECTION('',(0.E0,0.E0,-1.E0));
#448=AXIS2_PLACEMENT_3D('',#445,#446,#447);
#449=PLANE('',#448);
#450=ORIENTED_EDGE('',*,*,#358,.F.);
#452=ORIENTED_EDGE('',*,*,#451,.T.);
#453=ORIENTED_EDGE('',*,*,#413,.T.);
#454=ORIENTED_EDGE('',*,*,#439,.F.);
#455=EDGE_LOOP('',(#450,#452,#453,#454));
#456=FACE_OUTER_BOUND('',#455,.F.);
#458=CARTESIAN_POINT('',(-1.E0,0.E0,7.E-1));
#459=DIRECTION('',(0.E0,3.489949670250E-2,9.993908270191E-1));
#460=DIRECTION('',(1.E0,0.E0,0.E0));
#461=AXIS2_PLACEMENT_3D('',#458,#459,#460);
#462=PLANE('',#461);
#463=ORIENTED_EDGE('',*,*,#356,.F.);
#464=ORIENTED_EDGE('',*,*,#384,.T.);
#465=ORIENTED_EDGE('',*,*,#415,.T.);
#466=ORIENTED_EDGE('',*,*,#451,.F.);
#467=EDGE_LOOP('',(#463,#464,#465,#466));
#468=FACE_OUTER_BOUND('',#467,.F.);
#470=CARTESIAN_POINT('',(3.E-1,8.5E-1,0.E0));
#471=DIRECTION('',(0.E0,1.E0,0.E0));
#472=DIRECTION('',(-1.E0,0.E0,0.E0));
#473=AXIS2_PLACEMENT_3D('',#470,#471,#472);
#474=CYLINDRICAL_SURFACE('',#473,5.5E-1);
#475=ORIENTED_EDGE('',*,*,#420,.F.);
#477=ORIENTED_EDGE('',*,*,#476,.T.);
#479=ORIENTED_EDGE('',*,*,#478,.T.);
#481=ORIENTED_EDGE('',*,*,#480,.F.);
#482=EDGE_LOOP('',(#475,#477,#479,#481));
#483=FACE_OUTER_BOUND('',#482,.F.);
#485=CARTESIAN_POINT('',(-3.E-1,8.5E-1,5.5E-1));
#486=DIRECTION('',(0.E0,0.E0,1.E0));
#487=DIRECTION('',(1.E0,0.E0,0.E0));
#488=AXIS2_PLACEMENT_3D('',#485,#486,#487);
#489=PLANE('',#488);
#490=ORIENTED_EDGE('',*,*,#426,.F.);
#492=ORIENTED_EDGE('',*,*,#491,.T.);
#494=ORIENTED_EDGE('',*,*,#493,.T.);
#495=ORIENTED_EDGE('',*,*,#476,.F.);
#496=EDGE_LOOP('',(#490,#492,#494,#495));
#497=FACE_OUTER_BOUND('',#496,.F.);
#499=CARTESIAN_POINT('',(-3.E-1,8.5E-1,0.E0));
#500=DIRECTION('',(0.E0,1.E0,0.E0));
#501=DIRECTION('',(-1.E0,0.E0,0.E0));
#502=AXIS2_PLACEMENT_3D('',#499,#500,#501);
#503=CYLINDRICAL_SURFACE('',#502,5.5E-1);
#504=ORIENTED_EDGE('',*,*,#424,.F.);
#506=ORIENTED_EDGE('',*,*,#505,.T.);
#508=ORIENTED_EDGE('',*,*,#507,.T.);
#509=ORIENTED_EDGE('',*,*,#491,.F.);
#510=EDGE_LOOP('',(#504,#506,#508,#509));
#511=FACE_OUTER_BOUND('',#510,.F.);
#513=CARTESIAN_POINT('',(3.E-1,8.5E-1,-5.5E-1));
#514=DIRECTION('',(0.E0,0.E0,-1.E0));
#515=DIRECTION('',(-1.E0,0.E0,0.E0));
#516=AXIS2_PLACEMENT_3D('',#513,#514,#515);
#517=PLANE('',#516);
#518=ORIENTED_EDGE('',*,*,#422,.F.);
#519=ORIENTED_EDGE('',*,*,#480,.T.);
#521=ORIENTED_EDGE('',*,*,#520,.T.);
#522=ORIENTED_EDGE('',*,*,#505,.F.);
#523=EDGE_LOOP('',(#518,#519,#521,#522));
#524=FACE_OUTER_BOUND('',#523,.F.);
#526=CARTESIAN_POINT('',(0.E0,8.2E-1,0.E0));
#527=DIRECTION('',(0.E0,1.E0,0.E0));
#528=DIRECTION('',(-1.E0,0.E0,0.E0));
#529=AXIS2_PLACEMENT_3D('',#526,#527,#528);
#530=PLANE('',#529);
#531=ORIENTED_EDGE('',*,*,#478,.F.);
#532=ORIENTED_EDGE('',*,*,#493,.F.);
#533=ORIENTED_EDGE('',*,*,#507,.F.);
#534=ORIENTED_EDGE('',*,*,#520,.F.);
#535=EDGE_LOOP('',(#531,#532,#533,#534));
#536=FACE_OUTER_BOUND('',#535,.F.);
#538=CARTESIAN_POINT('',(-9.8E-1,0.E0,-6.8E-1));
#539=DIRECTION('',(0.E0,-3.489949670250E-2,-9.993908270191E-1));
#540=DIRECTION('',(1.E0,0.E0,0.E0));
#541=AXIS2_PLACEMENT_3D('',#538,#539,#540);
#542=PLANE('',#541);
#544=ORIENTED_EDGE('',*,*,#543,.F.);
#546=ORIENTED_EDGE('',*,*,#545,.F.);
#548=ORIENTED_EDGE('',*,*,#547,.F.);
#549=ORIENTED_EDGE('',*,*,#364,.F.);
#551=ORIENTED_EDGE('',*,*,#550,.T.);
#553=ORIENTED_EDGE('',*,*,#552,.T.);
#555=ORIENTED_EDGE('',*,*,#554,.F.);
#557=ORIENTED_EDGE('',*,*,#556,.T.);
#558=EDGE_LOOP('',(#544,#546,#548,#549,#551,#553,#555,#557));
#559=FACE_OUTER_BOUND('',#558,.F.);
#561=CARTESIAN_POINT('',(6.E-1,-4.E-1,-1.E0));
#562=DIRECTION('',(-7.071067811865E-1,7.071067811865E-1,0.E0));
#563=DIRECTION('',(-7.071067811865E-1,-7.071067811865E-1,0.E0));
#564=AXIS2_PLACEMENT_3D('',#561,#562,#563);
#565=PLANE('',#564);
#567=ORIENTED_EDGE('',*,*,#566,.T.);
#569=ORIENTED_EDGE('',*,*,#568,.F.);
#571=ORIENTED_EDGE('',*,*,#570,.F.);
#572=ORIENTED_EDGE('',*,*,#543,.T.);
#573=EDGE_LOOP('',(#567,#569,#571,#572));
#574=FACE_OUTER_BOUND('',#573,.F.);
#576=CARTESIAN_POINT('',(0.E0,-4.5E-1,0.E0));
#577=DIRECTION('',(0.E0,-1.E0,0.E0));
#578=DIRECTION('',(1.E0,0.E0,0.E0));
#579=AXIS2_PLACEMENT_3D('',#576,#577,#578);
#580=PLANE('',#579);
#581=ORIENTED_EDGE('',*,*,#566,.F.);
#582=ORIENTED_EDGE('',*,*,#556,.F.);
#584=ORIENTED_EDGE('',*,*,#583,.T.);
#586=ORIENTED_EDGE('',*,*,#585,.F.);
#587=EDGE_LOOP('',(#581,#582,#584,#586));
#588=FACE_OUTER_BOUND('',#587,.F.);
#590=ORIENTED_EDGE('',*,*,#589,.T.);
#592=ORIENTED_EDGE('',*,*,#591,.T.);
#593=EDGE_LOOP('',(#590,#592));
#594=FACE_BOUND('',#593,.F.);
#596=CARTESIAN_POINT('',(-5.5E-1,-4.5E-1,-1.E0));
#597=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,0.E0));
#598=DIRECTION('',(-7.071067811865E-1,7.071067811865E-1,0.E0));
#599=AXIS2_PLACEMENT_3D('',#596,#597,#598);
#600=PLANE('',#599);
#601=ORIENTED_EDGE('',*,*,#583,.F.);
#602=ORIENTED_EDGE('',*,*,#554,.T.);
#604=ORIENTED_EDGE('',*,*,#603,.T.);
#606=ORIENTED_EDGE('',*,*,#605,.F.);
#607=EDGE_LOOP('',(#601,#602,#604,#606));
#608=FACE_OUTER_BOUND('',#607,.F.);
#610=CARTESIAN_POINT('',(-6.E-1,-4.E-1,-1.E0));
#611=DIRECTION('',(0.E0,1.E0,0.E0));
#612=DIRECTION('',(-1.E0,0.E0,0.E0));
#613=AXIS2_PLACEMENT_3D('',#610,#611,#612);
#614=PLANE('',#613);
#615=ORIENTED_EDGE('',*,*,#552,.F.);
#617=ORIENTED_EDGE('',*,*,#616,.F.);
#619=ORIENTED_EDGE('',*,*,#618,.T.);
#620=ORIENTED_EDGE('',*,*,#603,.F.);
#621=EDGE_LOOP('',(#615,#617,#619,#620));
#622=FACE_OUTER_BOUND('',#621,.F.);
#624=CARTESIAN_POINT('',(-9.8E-1,0.E0,6.8E-1));
#625=DIRECTION('',(-9.993908270191E-1,-3.489949670250E-2,0.E0));
#626=DIRECTION('',(0.E0,0.E0,-1.E0));
#627=AXIS2_PLACEMENT_3D('',#624,#625,#626);
#628=PLANE('',#627);
#629=ORIENTED_EDGE('',*,*,#616,.T.);
#630=ORIENTED_EDGE('',*,*,#550,.F.);
#631=ORIENTED_EDGE('',*,*,#370,.F.);
#633=ORIENTED_EDGE('',*,*,#632,.T.);
#634=EDGE_LOOP('',(#629,#630,#631,#633));
#635=FACE_OUTER_BOUND('',#634,.F.);
#637=CARTESIAN_POINT('',(9.8E-1,0.E0,6.8E-1));
#638=DIRECTION('',(0.E0,-3.489949670250E-2,9.993908270191E-1));
#639=DIRECTION('',(-1.E0,0.E0,0.E0));
#640=AXIS2_PLACEMENT_3D('',#637,#638,#639);
#641=PLANE('',#640);
#642=ORIENTED_EDGE('',*,*,#568,.T.);
#643=ORIENTED_EDGE('',*,*,#585,.T.);
#644=ORIENTED_EDGE('',*,*,#605,.T.);
#645=ORIENTED_EDGE('',*,*,#618,.F.);
#646=ORIENTED_EDGE('',*,*,#632,.F.);
#647=ORIENTED_EDGE('',*,*,#368,.F.);
#649=ORIENTED_EDGE('',*,*,#648,.T.);
#651=ORIENTED_EDGE('',*,*,#650,.T.);
#652=EDGE_LOOP('',(#642,#643,#644,#645,#646,#647,#649,#651));
#653=FACE_OUTER_BOUND('',#652,.F.);
#655=CARTESIAN_POINT('',(9.8E-1,0.E0,-6.8E-1));
#656=DIRECTION('',(9.993908270191E-1,-3.489949670250E-2,0.E0));
#657=DIRECTION('',(0.E0,0.E0,1.E0));
#658=AXIS2_PLACEMENT_3D('',#655,#656,#657);
#659=PLANE('',#658);
#661=ORIENTED_EDGE('',*,*,#660,.T.);
#662=ORIENTED_EDGE('',*,*,#648,.F.);
#663=ORIENTED_EDGE('',*,*,#366,.F.);
#664=ORIENTED_EDGE('',*,*,#547,.T.);
#665=EDGE_LOOP('',(#661,#662,#663,#664));
#666=FACE_OUTER_BOUND('',#665,.F.);
#668=CARTESIAN_POINT('',(1.082694665184E0,-4.E-1,-1.E0));
#669=DIRECTION('',(0.E0,1.E0,0.E0));
#670=DIRECTION('',(-1.E0,0.E0,0.E0));
#671=AXIS2_PLACEMENT_3D('',#668,#669,#670);
#672=PLANE('',#671);
#673=ORIENTED_EDGE('',*,*,#545,.T.);
#674=ORIENTED_EDGE('',*,*,#570,.T.);
#675=ORIENTED_EDGE('',*,*,#650,.F.);
#676=ORIENTED_EDGE('',*,*,#660,.F.);
#677=EDGE_LOOP('',(#673,#674,#675,#676));
#678=FACE_OUTER_BOUND('',#677,.F.);
#680=CARTESIAN_POINT('',(0.E0,-4.027850478870E-1,0.E0));
#681=DIRECTION('',(0.E0,-1.E0,0.E0));
#682=DIRECTION('',(-1.E0,0.E0,0.E0));
#683=AXIS2_PLACEMENT_3D('',#680,#681,#682);
#684=CONICAL_SURFACE('',#683,2.660313089061E-1,3.573304304693E1);
#685=ORIENTED_EDGE('',*,*,#589,.F.);
#687=ORIENTED_EDGE('',*,*,#686,.T.);
#689=ORIENTED_EDGE('',*,*,#688,.F.);
#691=ORIENTED_EDGE('',*,*,#690,.F.);
#692=EDGE_LOOP('',(#685,#687,#689,#691));
#693=FACE_OUTER_BOUND('',#692,.F.);
#695=CARTESIAN_POINT('',(0.E0,-4.027850478870E-1,0.E0));
#696=DIRECTION('',(0.E0,-1.E0,0.E0));
#697=DIRECTION('',(-1.E0,0.E0,0.E0));
#698=AXIS2_PLACEMENT_3D('',#695,#696,#697);
#699=CONICAL_SURFACE('',#698,2.660313089061E-1,3.573304304693E1);
#700=ORIENTED_EDGE('',*,*,#591,.F.);
#701=ORIENTED_EDGE('',*,*,#690,.T.);
#703=ORIENTED_EDGE('',*,*,#702,.T.);
#704=ORIENTED_EDGE('',*,*,#686,.F.);
#705=EDGE_LOOP('',(#700,#701,#703,#704));
#706=FACE_OUTER_BOUND('',#705,.F.);
#708=CARTESIAN_POINT('',(0.E0,-3.555700957740E-1,0.E0));
#709=DIRECTION('',(0.E0,-1.E0,0.E0));
#710=DIRECTION('',(-1.E0,0.E0,0.E0));
#711=AXIS2_PLACEMENT_3D('',#708,#709,#710);
#712=PLANE('',#711);
#713=ORIENTED_EDGE('',*,*,#702,.F.);
#714=ORIENTED_EDGE('',*,*,#688,.T.);
#715=EDGE_LOOP('',(#713,#714));
#716=FACE_OUTER_BOUND('',#715,.F.);
#718=ORIENTED_EDGE('',*,*,#717,.F.);
#720=ORIENTED_EDGE('',*,*,#719,.T.);
#721=EDGE_LOOP('',(#718,#720));
#722=FACE_BOUND('',#721,.F.);
#724=CARTESIAN_POINT('',(0.E0,-3.508486005627E-1,0.E0));
#725=DIRECTION('',(0.E0,-1.E0,0.E0));
#726=DIRECTION('',(-1.E0,0.E0,0.E0));
#727=AXIS2_PLACEMENT_3D('',#724,#725,#726);
#728=CYLINDRICAL_SURFACE('',#727,1.5E-1);
#730=ORIENTED_EDGE('',*,*,#729,.F.);
#732=ORIENTED_EDGE('',*,*,#731,.F.);
#734=ORIENTED_EDGE('',*,*,#733,.T.);
#735=ORIENTED_EDGE('',*,*,#717,.T.);
#736=EDGE_LOOP('',(#730,#732,#734,#735));
#737=FACE_OUTER_BOUND('',#736,.F.);
#739=CARTESIAN_POINT('',(0.E0,-3.508486005627E-1,0.E0));
#740=DIRECTION('',(0.E0,-1.E0,0.E0));
#741=DIRECTION('',(-1.E0,0.E0,0.E0));
#742=AXIS2_PLACEMENT_3D('',#739,#740,#741);
#743=CYLINDRICAL_SURFACE('',#742,1.5E-1);
#744=ORIENTED_EDGE('',*,*,#729,.T.);
#745=ORIENTED_EDGE('',*,*,#719,.F.);
#746=ORIENTED_EDGE('',*,*,#733,.F.);
#748=ORIENTED_EDGE('',*,*,#747,.T.);
#749=EDGE_LOOP('',(#744,#745,#746,#748));
#750=FACE_OUTER_BOUND('',#749,.F.);
#752=CARTESIAN_POINT('',(0.E0,-4.E-1,0.E0));
#753=DIRECTION('',(0.E0,-1.E0,0.E0));
#754=DIRECTION('',(-1.E0,0.E0,0.E0));
#755=AXIS2_PLACEMENT_3D('',#752,#753,#754);
#756=PLANE('',#755);
#757=ORIENTED_EDGE('',*,*,#747,.F.);
#758=ORIENTED_EDGE('',*,*,#731,.T.);
#759=EDGE_LOOP('',(#757,#758));
#760=FACE_OUTER_BOUND('',#759,.F.);
#762=CLOSED_SHELL('',(#374,#391,#404,#430,#444,#457,#469,#484,#498,#512,#525,
#537,#560,#575,#595,#609,#623,#636,#654,#667,#679,#694,#707,#723,#738,#751,
#761));
#763=MANIFOLD_SOLID_BREP('',#762);
#764=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#765=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#766=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#767=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#766);
#768=(CONVERSION_BASED_UNIT('DEGREE',#767)NAMED_UNIT(#765)PLANE_ANGLE_UNIT());
#769=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#770=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.920713528173E-4),#764,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#772=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#773=DIRECTION('',(0.E0,0.E0,1.E0));
#774=DIRECTION('',(1.E0,0.E0,0.E0));
#777=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#778=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#777);
#779=DESIGN_CONTEXT('',#777,'design');
#780=MECHANICAL_CONTEXT('',#777,'mechanical');
#781=PRODUCT('6521','6521','NOT SPECIFIED',(#780));
#782=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#781,
.MADE.);
#791=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#792=DIRECTION('',(0.E0,0.E0,1.E0));
#793=DIRECTION('',(1.E0,0.E0,0.E0));
#794=AXIS2_PLACEMENT_3D('',#791,#792,#793);
#795=ITEM_DEFINED_TRANSFORMATION('','',#775,#794);
#796=(REPRESENTATION_RELATIONSHIP('','',#776,#788)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#795)SHAPE_REPRESENTATION_RELATIONSHIP());
#797=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#796,#790);
#799=CARTESIAN_POINT('',(-1.E0,0.E0,-4.5E-1));
#800=DIRECTION('',(0.E0,0.E0,-1.E0));
#801=DIRECTION('',(-1.E0,0.E0,0.E0));
#802=AXIS2_PLACEMENT_3D('',#799,#800,#801);
#804=CARTESIAN_POINT('',(-1.E0,-3.75E-1,-4.5E-1));
#805=DIRECTION('',(0.E0,0.E0,-1.E0));
#806=DIRECTION('',(0.E0,-1.E0,0.E0));
#807=AXIS2_PLACEMENT_3D('',#804,#805,#806);
#809=DIRECTION('',(1.E0,0.E0,0.E0));
#810=VECTOR('',#809,3.3E-1);
#811=CARTESIAN_POINT('',(-1.E0,-3.75E-1,-4.5E-1));
#812=LINE('',#811,#810);
#813=DIRECTION('',(0.E0,-1.E0,0.E0));
#814=VECTOR('',#813,3.75E-1);
#815=CARTESIAN_POINT('',(-1.E0,0.E0,-4.5E-1));
#816=LINE('',#815,#814);
#817=DIRECTION('',(0.E0,1.E0,0.E0));
#818=VECTOR('',#817,1.25E-1);
#819=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,-4.5E-1));
#820=LINE('',#819,#818);
#821=CARTESIAN_POINT('',(-1.E0,0.E0,4.5E-1));
#822=DIRECTION('',(0.E0,0.E0,1.E0));
#823=DIRECTION('',(0.E0,1.E0,0.E0));
#824=AXIS2_PLACEMENT_3D('',#821,#822,#823);
#826=CARTESIAN_POINT('',(-1.E0,-3.75E-1,4.5E-1));
#827=DIRECTION('',(0.E0,0.E0,1.E0));
#828=DIRECTION('',(-1.E0,0.E0,0.E0));
#829=AXIS2_PLACEMENT_3D('',#826,#827,#828);
#831=DIRECTION('',(0.E0,0.E0,1.E0));
#832=VECTOR('',#831,9.E-1);
#833=CARTESIAN_POINT('',(-1.E0,1.25E-1,-4.5E-1));
#834=LINE('',#833,#832);
#835=DIRECTION('',(-1.E0,0.E0,0.E0));
#836=VECTOR('',#835,2.089082241863E-1);
#837=CARTESIAN_POINT('',(-7.910917758137E-1,1.25E-1,-4.5E-1));
#838=LINE('',#837,#836);
#839=DIRECTION('',(0.E0,0.E0,-1.E0));
#840=VECTOR('',#839,9.E-1);
#841=CARTESIAN_POINT('',(-7.910917758137E-1,1.25E-1,4.5E-1));
#842=LINE('',#841,#840);
#843=DIRECTION('',(1.E0,0.E0,0.E0));
#844=VECTOR('',#843,2.089082241863E-1);
#845=CARTESIAN_POINT('',(-1.E0,1.25E-1,4.5E-1));
#846=LINE('',#845,#844);
#847=DIRECTION('',(0.E0,1.E0,0.E0));
#848=VECTOR('',#847,1.25E-1);
#849=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,4.5E-1));
#850=LINE('',#849,#848);
#851=DIRECTION('',(0.E0,0.E0,1.E0));
#852=VECTOR('',#851,9.E-1);
#853=CARTESIAN_POINT('',(-1.E0,0.E0,-4.5E-1));
#854=LINE('',#853,#852);
#855=DIRECTION('',(1.E0,0.E0,0.E0));
#856=VECTOR('',#855,2.089082241863E-1);
#857=CARTESIAN_POINT('',(-1.E0,0.E0,4.5E-1));
#858=LINE('',#857,#856);
#859=DIRECTION('',(0.E0,0.E0,-1.E0));
#860=VECTOR('',#859,9.E-1);
#861=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,4.5E-1));
#862=LINE('',#861,#860);
#863=DIRECTION('',(-1.E0,0.E0,0.E0));
#864=VECTOR('',#863,2.089082241863E-1);
#865=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,-4.5E-1));
#866=LINE('',#865,#864);
#867=DIRECTION('',(0.E0,0.E0,-1.E0));
#868=VECTOR('',#867,9.E-1);
#869=CARTESIAN_POINT('',(-1.E0,-3.75E-1,4.5E-1));
#870=LINE('',#869,#868);
#871=DIRECTION('',(0.E0,-1.E0,0.E0));
#872=VECTOR('',#871,3.75E-1);
#873=CARTESIAN_POINT('',(-1.E0,0.E0,4.5E-1));
#874=LINE('',#873,#872);
#875=DIRECTION('',(1.E0,0.E0,0.E0));
#876=VECTOR('',#875,3.3E-1);
#877=CARTESIAN_POINT('',(-1.E0,-3.75E-1,4.5E-1));
#878=LINE('',#877,#876);
#879=DIRECTION('',(0.E0,1.E0,0.E0));
#880=VECTOR('',#879,1.25E-1);
#881=CARTESIAN_POINT('',(-6.7E-1,-5.E-1,4.5E-1));
#882=LINE('',#881,#880);
#883=DIRECTION('',(0.E0,0.E0,-1.E0));
#884=VECTOR('',#883,9.E-1);
#885=CARTESIAN_POINT('',(-6.7E-1,-3.75E-1,4.5E-1));
#886=LINE('',#885,#884);
#887=DIRECTION('',(0.E0,-1.E0,0.E0));
#888=VECTOR('',#887,1.25E-1);
#889=CARTESIAN_POINT('',(-6.7E-1,-3.75E-1,-4.5E-1));
#890=LINE('',#889,#888);
#891=DIRECTION('',(0.E0,0.E0,1.E0));
#892=VECTOR('',#891,9.E-1);
#893=CARTESIAN_POINT('',(-6.7E-1,-5.E-1,-4.5E-1));
#894=LINE('',#893,#892);
#895=DIRECTION('',(0.E0,0.E0,-1.E0));
#896=VECTOR('',#895,9.E-1);
#897=CARTESIAN_POINT('',(-1.E0,-5.E-1,4.5E-1));
#898=LINE('',#897,#896);
#899=DIRECTION('',(1.E0,0.E0,0.E0));
#900=VECTOR('',#899,3.3E-1);
#901=CARTESIAN_POINT('',(-1.E0,-5.E-1,4.5E-1));
#902=LINE('',#901,#900);
#903=DIRECTION('',(-1.E0,0.E0,0.E0));
#904=VECTOR('',#903,3.3E-1);
#905=CARTESIAN_POINT('',(-6.7E-1,-5.E-1,-4.5E-1));
#906=LINE('',#905,#904);
#907=DIRECTION('',(0.E0,0.E0,1.E0));
#908=VECTOR('',#907,9.E-1);
#909=CARTESIAN_POINT('',(-1.125E0,0.E0,-4.5E-1));
#910=LINE('',#909,#908);
#911=DIRECTION('',(0.E0,-1.E0,0.E0));
#912=VECTOR('',#911,3.75E-1);
#913=CARTESIAN_POINT('',(-1.125E0,0.E0,4.5E-1));
#914=LINE('',#913,#912);
#915=DIRECTION('',(0.E0,0.E0,-1.E0));
#916=VECTOR('',#915,9.E-1);
#917=CARTESIAN_POINT('',(-1.125E0,-3.75E-1,4.5E-1));
#918=LINE('',#917,#916);
#919=DIRECTION('',(0.E0,1.E0,0.E0));
#920=VECTOR('',#919,3.75E-1);
#921=CARTESIAN_POINT('',(-1.125E0,-3.75E-1,-4.5E-1));
#922=LINE('',#921,#920);
#923=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,4.5E-1));
#924=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,-4.5E-1));
#925=VERTEX_POINT('',#923);
#926=VERTEX_POINT('',#924);
#927=CARTESIAN_POINT('',(-7.910917758137E-1,1.25E-1,4.5E-1));
#928=CARTESIAN_POINT('',(-7.910917758137E-1,1.25E-1,-4.5E-1));
#929=VERTEX_POINT('',#927);
#930=VERTEX_POINT('',#928);
#931=CARTESIAN_POINT('',(-6.7E-1,-5.E-1,4.5E-1));
#932=CARTESIAN_POINT('',(-6.7E-1,-3.75E-1,4.5E-1));
#933=VERTEX_POINT('',#931);
#934=VERTEX_POINT('',#932);
#935=CARTESIAN_POINT('',(-6.7E-1,-3.75E-1,-4.5E-1));
#936=VERTEX_POINT('',#935);
#937=CARTESIAN_POINT('',(-6.7E-1,-5.E-1,-4.5E-1));
#938=VERTEX_POINT('',#937);
#939=CARTESIAN_POINT('',(-1.E0,-3.75E-1,4.5E-1));
#940=VERTEX_POINT('',#939);
#941=CARTESIAN_POINT('',(-1.E0,-3.75E-1,-4.5E-1));
#942=VERTEX_POINT('',#941);
#943=CARTESIAN_POINT('',(-1.E0,0.E0,-4.5E-1));
#944=CARTESIAN_POINT('',(-1.E0,0.E0,4.5E-1));
#945=VERTEX_POINT('',#943);
#946=VERTEX_POINT('',#944);
#947=CARTESIAN_POINT('',(-1.E0,1.25E-1,4.5E-1));
#948=CARTESIAN_POINT('',(-1.125E0,0.E0,4.5E-1));
#949=VERTEX_POINT('',#947);
#950=VERTEX_POINT('',#948);
#951=CARTESIAN_POINT('',(-1.125E0,0.E0,-4.5E-1));
#952=VERTEX_POINT('',#951);
#953=CARTESIAN_POINT('',(-1.E0,1.25E-1,-4.5E-1));
#954=VERTEX_POINT('',#953);
#955=CARTESIAN_POINT('',(-1.E0,-5.E-1,-4.5E-1));
#956=CARTESIAN_POINT('',(-1.125E0,-3.75E-1,-4.5E-1));
#957=VERTEX_POINT('',#955);
#958=VERTEX_POINT('',#956);
#959=CARTESIAN_POINT('',(-1.125E0,-3.75E-1,4.5E-1));
#960=VERTEX_POINT('',#959);
#961=CARTESIAN_POINT('',(-1.E0,-5.E-1,4.5E-1));
#962=VERTEX_POINT('',#961);
#963=CARTESIAN_POINT('',(-1.E0,-3.75E-1,1.62324E0));
#964=DIRECTION('',(0.E0,0.E0,-1.E0));
#965=DIRECTION('',(0.E0,-1.E0,0.E0));
#966=AXIS2_PLACEMENT_3D('',#963,#964,#965);
#967=CYLINDRICAL_SURFACE('',#966,1.25E-1);
#969=ORIENTED_EDGE('',*,*,#968,.T.);
#971=ORIENTED_EDGE('',*,*,#970,.F.);
#973=ORIENTED_EDGE('',*,*,#972,.T.);
#975=ORIENTED_EDGE('',*,*,#974,.T.);
#976=EDGE_LOOP('',(#969,#971,#973,#975));
#977=FACE_OUTER_BOUND('',#976,.F.);
#979=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,-4.5E-1));
#980=DIRECTION('',(0.E0,0.E0,1.E0));
#981=DIRECTION('',(-1.E0,0.E0,0.E0));
#982=AXIS2_PLACEMENT_3D('',#979,#980,#981);
#983=PLANE('',#982);
#985=ORIENTED_EDGE('',*,*,#984,.F.);
#987=ORIENTED_EDGE('',*,*,#986,.F.);
#988=ORIENTED_EDGE('',*,*,#968,.F.);
#990=ORIENTED_EDGE('',*,*,#989,.F.);
#992=ORIENTED_EDGE('',*,*,#991,.F.);
#994=ORIENTED_EDGE('',*,*,#993,.F.);
#996=ORIENTED_EDGE('',*,*,#995,.F.);
#998=ORIENTED_EDGE('',*,*,#997,.F.);
#1000=ORIENTED_EDGE('',*,*,#999,.T.);
#1002=ORIENTED_EDGE('',*,*,#1001,.T.);
#1003=EDGE_LOOP('',(#985,#987,#988,#990,#992,#994,#996,#998,#1000,#1002));
#1004=FACE_OUTER_BOUND('',#1003,.F.);
#1006=CARTESIAN_POINT('',(-1.E0,0.E0,-1.62324E0));
#1007=DIRECTION('',(0.E0,0.E0,1.E0));
#1008=DIRECTION('',(0.E0,1.E0,0.E0));
#1009=AXIS2_PLACEMENT_3D('',#1006,#1007,#1008);
#1010=CYLINDRICAL_SURFACE('',#1009,1.25E-1);
#1012=ORIENTED_EDGE('',*,*,#1011,.T.);
#1014=ORIENTED_EDGE('',*,*,#1013,.F.);
#1015=ORIENTED_EDGE('',*,*,#984,.T.);
#1017=ORIENTED_EDGE('',*,*,#1016,.T.);
#1018=EDGE_LOOP('',(#1012,#1014,#1015,#1017));
#1019=FACE_OUTER_BOUND('',#1018,.F.);
#1021=CARTESIAN_POINT('',(-1.125E0,0.E0,4.5E-1));
#1022=DIRECTION('',(0.E0,0.E0,-1.E0));
#1023=DIRECTION('',(1.E0,0.E0,0.E0));
#1024=AXIS2_PLACEMENT_3D('',#1021,#1022,#1023);
#1025=PLANE('',#1024);
#1026=ORIENTED_EDGE('',*,*,#1011,.F.);
#1028=ORIENTED_EDGE('',*,*,#1027,.T.);
#1030=ORIENTED_EDGE('',*,*,#1029,.F.);
#1032=ORIENTED_EDGE('',*,*,#1031,.F.);
#1034=ORIENTED_EDGE('',*,*,#1033,.T.);
#1036=ORIENTED_EDGE('',*,*,#1035,.T.);
#1038=ORIENTED_EDGE('',*,*,#1037,.F.);
#1040=ORIENTED_EDGE('',*,*,#1039,.F.);
#1041=ORIENTED_EDGE('',*,*,#972,.F.);
#1043=ORIENTED_EDGE('',*,*,#1042,.F.);
#1044=EDGE_LOOP('',(#1026,#1028,#1030,#1032,#1034,#1036,#1038,#1040,#1041,
#1043));
#1045=FACE_OUTER_BOUND('',#1044,.F.);
#1047=CARTESIAN_POINT('',(0.E0,1.25E-1,0.E0));
#1048=DIRECTION('',(0.E0,1.E0,0.E0));
#1049=DIRECTION('',(-1.E0,0.E0,0.E0));
#1050=AXIS2_PLACEMENT_3D('',#1047,#1048,#1049);
#1051=PLANE('',#1050);
#1052=ORIENTED_EDGE('',*,*,#1016,.F.);
#1053=ORIENTED_EDGE('',*,*,#1001,.F.);
#1055=ORIENTED_EDGE('',*,*,#1054,.F.);
#1056=ORIENTED_EDGE('',*,*,#1027,.F.);
#1057=EDGE_LOOP('',(#1052,#1053,#1055,#1056));
#1058=FACE_OUTER_BOUND('',#1057,.F.);
#1060=CARTESIAN_POINT('',(-7.910917758137E-1,0.E0,4.5E-1));
#1061=DIRECTION('',(-1.E0,0.E0,0.E0));
#1062=DIRECTION('',(0.E0,0.E0,-1.E0));
#1063=AXIS2_PLACEMENT_3D('',#1060,#1061,#1062);
#1064=PLANE('',#1063);
#1066=ORIENTED_EDGE('',*,*,#1065,.F.);
#1067=ORIENTED_EDGE('',*,*,#1029,.T.);
#1068=ORIENTED_EDGE('',*,*,#1054,.T.);
#1069=ORIENTED_EDGE('',*,*,#999,.F.);
#1070=EDGE_LOOP('',(#1066,#1067,#1068,#1069));
#1071=FACE_OUTER_BOUND('',#1070,.F.);
#1073=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1074=DIRECTION('',(0.E0,1.E0,0.E0));
#1075=DIRECTION('',(-1.E0,0.E0,0.E0));
#1076=AXIS2_PLACEMENT_3D('',#1073,#1074,#1075);
#1077=PLANE('',#1076);
#1079=ORIENTED_EDGE('',*,*,#1078,.T.);
#1080=ORIENTED_EDGE('',*,*,#1031,.T.);
#1081=ORIENTED_EDGE('',*,*,#1065,.T.);
#1082=ORIENTED_EDGE('',*,*,#997,.T.);
#1083=EDGE_LOOP('',(#1079,#1080,#1081,#1082));
#1084=FACE_OUTER_BOUND('',#1083,.F.);
#1086=CARTESIAN_POINT('',(-1.E0,0.E0,4.5E-1));
#1087=DIRECTION('',(-1.E0,0.E0,0.E0));
#1088=DIRECTION('',(0.E0,0.E0,-1.E0));
#1089=AXIS2_PLACEMENT_3D('',#1086,#1087,#1088);
#1090=PLANE('',#1089);
#1092=ORIENTED_EDGE('',*,*,#1091,.F.);
#1093=ORIENTED_EDGE('',*,*,#1033,.F.);
#1094=ORIENTED_EDGE('',*,*,#1078,.F.);
#1095=ORIENTED_EDGE('',*,*,#995,.T.);
#1096=EDGE_LOOP('',(#1092,#1093,#1094,#1095));
#1097=FACE_OUTER_BOUND('',#1096,.F.);
#1099=CARTESIAN_POINT('',(-1.E0,-3.75E-1,4.5E-1));
#1100=DIRECTION('',(0.E0,-1.E0,0.E0));
#1101=DIRECTION('',(0.E0,0.E0,-1.E0));
#1102=AXIS2_PLACEMENT_3D('',#1099,#1100,#1101);
#1103=PLANE('',#1102);
#1104=ORIENTED_EDGE('',*,*,#1035,.F.);
#1105=ORIENTED_EDGE('',*,*,#1091,.T.);
#1106=ORIENTED_EDGE('',*,*,#993,.T.);
#1108=ORIENTED_EDGE('',*,*,#1107,.F.);
#1109=EDGE_LOOP('',(#1104,#1105,#1106,#1108));
#1110=FACE_OUTER_BOUND('',#1109,.F.);
#1112=CARTESIAN_POINT('',(-6.7E-1,-5.E-1,0.E0));
#1113=DIRECTION('',(-1.E0,0.E0,0.E0));
#1114=DIRECTION('',(0.E0,-1.E0,0.E0));
#1115=AXIS2_PLACEMENT_3D('',#1112,#1113,#1114);
#1116=PLANE('',#1115);
#1117=ORIENTED_EDGE('',*,*,#1037,.T.);
#1118=ORIENTED_EDGE('',*,*,#1107,.T.);
#1119=ORIENTED_EDGE('',*,*,#991,.T.);
#1121=ORIENTED_EDGE('',*,*,#1120,.T.);
#1122=EDGE_LOOP('',(#1117,#1118,#1119,#1121));
#1123=FACE_OUTER_BOUND('',#1122,.F.);
#1125=CARTESIAN_POINT('',(0.E0,-5.E-1,0.E0));
#1126=DIRECTION('',(0.E0,1.E0,0.E0));
#1127=DIRECTION('',(-1.E0,0.E0,0.E0));
#1128=AXIS2_PLACEMENT_3D('',#1125,#1126,#1127);
#1129=PLANE('',#1128);
#1130=ORIENTED_EDGE('',*,*,#974,.F.);
#1131=ORIENTED_EDGE('',*,*,#1039,.T.);
#1132=ORIENTED_EDGE('',*,*,#1120,.F.);
#1133=ORIENTED_EDGE('',*,*,#989,.T.);
#1134=EDGE_LOOP('',(#1130,#1131,#1132,#1133));
#1135=FACE_OUTER_BOUND('',#1134,.F.);
#1137=CARTESIAN_POINT('',(-1.125E0,0.E0,-4.5E-1));
#1138=DIRECTION('',(1.E0,0.E0,0.E0));
#1139=DIRECTION('',(0.E0,0.E0,1.E0));
#1140=AXIS2_PLACEMENT_3D('',#1137,#1138,#1139);
#1141=PLANE('',#1140);
#1142=ORIENTED_EDGE('',*,*,#1013,.T.);
#1143=ORIENTED_EDGE('',*,*,#1042,.T.);
#1144=ORIENTED_EDGE('',*,*,#970,.T.);
#1145=ORIENTED_EDGE('',*,*,#986,.T.);
#1146=EDGE_LOOP('',(#1142,#1143,#1144,#1145));
#1147=FACE_OUTER_BOUND('',#1146,.F.);
#1149=CLOSED_SHELL('',(#978,#1005,#1020,#1046,#1059,#1072,#1085,#1098,#1111,
#1124,#1136,#1148));
#1150=MANIFOLD_SOLID_BREP('',#1149);
#1152=CARTESIAN_POINT('',(1.E0,0.E0,4.5E-1));
#1153=DIRECTION('',(0.E0,0.E0,1.E0));
#1154=DIRECTION('',(1.E0,0.E0,0.E0));
#1155=AXIS2_PLACEMENT_3D('',#1152,#1153,#1154);
#1157=CARTESIAN_POINT('',(1.E0,-3.75E-1,4.5E-1));
#1158=DIRECTION('',(0.E0,0.E0,1.E0));
#1159=DIRECTION('',(0.E0,-1.E0,0.E0));
#1160=AXIS2_PLACEMENT_3D('',#1157,#1158,#1159);
#1162=CARTESIAN_POINT('',(1.E0,0.E0,-4.5E-1));
#1163=DIRECTION('',(0.E0,0.E0,-1.E0));
#1164=DIRECTION('',(0.E0,1.E0,0.E0));
#1165=AXIS2_PLACEMENT_3D('',#1162,#1163,#1164);
#1167=DIRECTION('',(0.E0,1.E0,0.E0));
#1168=VECTOR('',#1167,1.25E-1);
#1169=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,-4.5E-1));
#1170=LINE('',#1169,#1168);
#1171=DIRECTION('',(0.E0,-1.E0,0.E0));
#1172=VECTOR('',#1171,3.75E-1);
#1173=CARTESIAN_POINT('',(1.E0,0.E0,-4.5E-1));
#1174=LINE('',#1173,#1172);
#1175=DIRECTION('',(-1.E0,0.E0,0.E0));
#1176=VECTOR('',#1175,3.3E-1);
#1177=CARTESIAN_POINT('',(1.E0,-3.75E-1,-4.5E-1));
#1178=LINE('',#1177,#1176);
#1179=CARTESIAN_POINT('',(1.E0,-3.75E-1,-4.5E-1));
#1180=DIRECTION('',(0.E0,0.E0,-1.E0));
#1181=DIRECTION('',(1.E0,0.E0,0.E0));
#1182=AXIS2_PLACEMENT_3D('',#1179,#1180,#1181);
#1184=DIRECTION('',(0.E0,0.E0,-1.E0));
#1185=VECTOR('',#1184,9.E-1);
#1186=CARTESIAN_POINT('',(1.E0,1.25E-1,4.5E-1));
#1187=LINE('',#1186,#1185);
#1188=DIRECTION('',(-1.E0,0.E0,0.E0));
#1189=VECTOR('',#1188,2.089082241863E-1);
#1190=CARTESIAN_POINT('',(1.E0,1.25E-1,4.5E-1));
#1191=LINE('',#1190,#1189);
#1192=DIRECTION('',(0.E0,0.E0,-1.E0));
#1193=VECTOR('',#1192,9.E-1);
#1194=CARTESIAN_POINT('',(7.910917758137E-1,1.25E-1,4.5E-1));
#1195=LINE('',#1194,#1193);
#1196=DIRECTION('',(1.E0,0.E0,0.E0));
#1197=VECTOR('',#1196,2.089082241863E-1);
#1198=CARTESIAN_POINT('',(7.910917758137E-1,1.25E-1,-4.5E-1));
#1199=LINE('',#1198,#1197);
#1200=DIRECTION('',(0.E0,1.E0,0.E0));
#1201=VECTOR('',#1200,1.25E-1);
#1202=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,4.5E-1));
#1203=LINE('',#1202,#1201);
#1204=DIRECTION('',(0.E0,0.E0,1.E0));
#1205=VECTOR('',#1204,9.E-1);
#1206=CARTESIAN_POINT('',(1.E0,0.E0,-4.5E-1));
#1207=LINE('',#1206,#1205);
#1208=DIRECTION('',(1.E0,0.E0,0.E0));
#1209=VECTOR('',#1208,2.089082241863E-1);
#1210=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,-4.5E-1));
#1211=LINE('',#1210,#1209);
#1212=DIRECTION('',(0.E0,0.E0,-1.E0));
#1213=VECTOR('',#1212,9.E-1);
#1214=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,4.5E-1));
#1215=LINE('',#1214,#1213);
#1216=DIRECTION('',(-1.E0,0.E0,0.E0));
#1217=VECTOR('',#1216,2.089082241863E-1);
#1218=CARTESIAN_POINT('',(1.E0,0.E0,4.5E-1));
#1219=LINE('',#1218,#1217);
#1220=DIRECTION('',(0.E0,0.E0,-1.E0));
#1221=VECTOR('',#1220,9.E-1);
#1222=CARTESIAN_POINT('',(1.E0,-3.75E-1,4.5E-1));
#1223=LINE('',#1222,#1221);
#1224=DIRECTION('',(0.E0,-1.E0,0.E0));
#1225=VECTOR('',#1224,3.75E-1);
#1226=CARTESIAN_POINT('',(1.E0,0.E0,4.5E-1));
#1227=LINE('',#1226,#1225);
#1228=DIRECTION('',(-1.E0,0.E0,0.E0));
#1229=VECTOR('',#1228,3.3E-1);
#1230=CARTESIAN_POINT('',(1.E0,-3.75E-1,4.5E-1));
#1231=LINE('',#1230,#1229);
#1232=DIRECTION('',(0.E0,1.E0,0.E0));
#1233=VECTOR('',#1232,1.25E-1);
#1234=CARTESIAN_POINT('',(6.7E-1,-5.E-1,4.5E-1));
#1235=LINE('',#1234,#1233);
#1236=DIRECTION('',(0.E0,0.E0,1.E0));
#1237=VECTOR('',#1236,9.E-1);
#1238=CARTESIAN_POINT('',(6.7E-1,-5.E-1,-4.5E-1));
#1239=LINE('',#1238,#1237);
#1240=DIRECTION('',(0.E0,-1.E0,0.E0));
#1241=VECTOR('',#1240,1.25E-1);
#1242=CARTESIAN_POINT('',(6.7E-1,-3.75E-1,-4.5E-1));
#1243=LINE('',#1242,#1241);
#1244=DIRECTION('',(0.E0,0.E0,-1.E0));
#1245=VECTOR('',#1244,9.E-1);
#1246=CARTESIAN_POINT('',(6.7E-1,-3.75E-1,4.5E-1));
#1247=LINE('',#1246,#1245);
#1248=DIRECTION('',(0.E0,0.E0,1.E0));
#1249=VECTOR('',#1248,9.E-1);
#1250=CARTESIAN_POINT('',(1.E0,-5.E-1,-4.5E-1));
#1251=LINE('',#1250,#1249);
#1252=DIRECTION('',(-1.E0,0.E0,0.E0));
#1253=VECTOR('',#1252,3.3E-1);
#1254=CARTESIAN_POINT('',(1.E0,-5.E-1,-4.5E-1));
#1255=LINE('',#1254,#1253);
#1256=DIRECTION('',(1.E0,0.E0,0.E0));
#1257=VECTOR('',#1256,3.3E-1);
#1258=CARTESIAN_POINT('',(6.7E-1,-5.E-1,4.5E-1));
#1259=LINE('',#1258,#1257);
#1260=DIRECTION('',(0.E0,0.E0,-1.E0));
#1261=VECTOR('',#1260,9.E-1);
#1262=CARTESIAN_POINT('',(1.125E0,0.E0,4.5E-1));
#1263=LINE('',#1262,#1261);
#1264=DIRECTION('',(0.E0,-1.E0,0.E0));
#1265=VECTOR('',#1264,3.75E-1);
#1266=CARTESIAN_POINT('',(1.125E0,0.E0,-4.5E-1));
#1267=LINE('',#1266,#1265);
#1268=DIRECTION('',(0.E0,0.E0,1.E0));
#1269=VECTOR('',#1268,9.E-1);
#1270=CARTESIAN_POINT('',(1.125E0,-3.75E-1,-4.5E-1));
#1271=LINE('',#1270,#1269);
#1272=DIRECTION('',(0.E0,1.E0,0.E0));
#1273=VECTOR('',#1272,3.75E-1);
#1274=CARTESIAN_POINT('',(1.125E0,-3.75E-1,4.5E-1));
#1275=LINE('',#1274,#1273);
#1276=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,4.5E-1));
#1277=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,-4.5E-1));
#1278=VERTEX_POINT('',#1276);
#1279=VERTEX_POINT('',#1277);
#1280=CARTESIAN_POINT('',(7.910917758137E-1,1.25E-1,4.5E-1));
#1281=CARTESIAN_POINT('',(7.910917758137E-1,1.25E-1,-4.5E-1));
#1282=VERTEX_POINT('',#1280);
#1283=VERTEX_POINT('',#1281);
#1284=CARTESIAN_POINT('',(1.E0,0.E0,-4.5E-1));
#1285=CARTESIAN_POINT('',(1.E0,0.E0,4.5E-1));
#1286=VERTEX_POINT('',#1284);
#1287=VERTEX_POINT('',#1285);
#1288=CARTESIAN_POINT('',(6.7E-1,-5.E-1,4.5E-1));
#1289=CARTESIAN_POINT('',(6.7E-1,-3.75E-1,4.5E-1));
#1290=VERTEX_POINT('',#1288);
#1291=VERTEX_POINT('',#1289);
#1292=CARTESIAN_POINT('',(6.7E-1,-3.75E-1,-4.5E-1));
#1293=VERTEX_POINT('',#1292);
#1294=CARTESIAN_POINT('',(6.7E-1,-5.E-1,-4.5E-1));
#1295=VERTEX_POINT('',#1294);
#1296=CARTESIAN_POINT('',(1.E0,-3.75E-1,4.5E-1));
#1297=CARTESIAN_POINT('',(1.E0,-3.75E-1,-4.5E-1));
#1298=VERTEX_POINT('',#1296);
#1299=VERTEX_POINT('',#1297);
#1300=CARTESIAN_POINT('',(1.E0,1.25E-1,-4.5E-1));
#1301=CARTESIAN_POINT('',(1.125E0,0.E0,-4.5E-1));
#1302=VERTEX_POINT('',#1300);
#1303=VERTEX_POINT('',#1301);
#1304=CARTESIAN_POINT('',(1.125E0,0.E0,4.5E-1));
#1305=VERTEX_POINT('',#1304);
#1306=CARTESIAN_POINT('',(1.E0,1.25E-1,4.5E-1));
#1307=VERTEX_POINT('',#1306);
#1308=CARTESIAN_POINT('',(1.E0,-5.E-1,4.5E-1));
#1309=CARTESIAN_POINT('',(1.125E0,-3.75E-1,4.5E-1));
#1310=VERTEX_POINT('',#1308);
#1311=VERTEX_POINT('',#1309);
#1312=CARTESIAN_POINT('',(1.125E0,-3.75E-1,-4.5E-1));
#1313=VERTEX_POINT('',#1312);
#1314=CARTESIAN_POINT('',(1.E0,-5.E-1,-4.5E-1));
#1315=VERTEX_POINT('',#1314);
#1316=CARTESIAN_POINT('',(1.E0,-3.75E-1,-1.62324E0));
#1317=DIRECTION('',(0.E0,0.E0,1.E0));
#1318=DIRECTION('',(0.E0,-1.E0,0.E0));
#1319=AXIS2_PLACEMENT_3D('',#1316,#1317,#1318);
#1320=CYLINDRICAL_SURFACE('',#1319,1.25E-1);
#1322=ORIENTED_EDGE('',*,*,#1321,.T.);
#1324=ORIENTED_EDGE('',*,*,#1323,.F.);
#1326=ORIENTED_EDGE('',*,*,#1325,.T.);
#1328=ORIENTED_EDGE('',*,*,#1327,.T.);
#1329=EDGE_LOOP('',(#1322,#1324,#1326,#1328));
#1330=FACE_OUTER_BOUND('',#1329,.F.);
#1332=CARTESIAN_POINT('',(1.125E0,0.E0,4.5E-1));
#1333=DIRECTION('',(0.E0,0.E0,1.E0));
#1334=DIRECTION('',(-1.E0,0.E0,0.E0));
#1335=AXIS2_PLACEMENT_3D('',#1332,#1333,#1334);
#1336=PLANE('',#1335);
#1338=ORIENTED_EDGE('',*,*,#1337,.F.);
#1340=ORIENTED_EDGE('',*,*,#1339,.F.);
#1341=ORIENTED_EDGE('',*,*,#1321,.F.);
#1343=ORIENTED_EDGE('',*,*,#1342,.F.);
#1345=ORIENTED_EDGE('',*,*,#1344,.T.);
#1347=ORIENTED_EDGE('',*,*,#1346,.F.);
#1349=ORIENTED_EDGE('',*,*,#1348,.F.);
#1351=ORIENTED_EDGE('',*,*,#1350,.T.);
#1353=ORIENTED_EDGE('',*,*,#1352,.T.);
#1355=ORIENTED_EDGE('',*,*,#1354,.F.);
#1356=EDGE_LOOP('',(#1338,#1340,#1341,#1343,#1345,#1347,#1349,#1351,#1353,
#1355));
#1357=FACE_OUTER_BOUND('',#1356,.F.);
#1359=CARTESIAN_POINT('',(1.E0,0.E0,1.62324E0));
#1360=DIRECTION('',(0.E0,0.E0,-1.E0));
#1361=DIRECTION('',(0.E0,1.E0,0.E0));
#1362=AXIS2_PLACEMENT_3D('',#1359,#1360,#1361);
#1363=CYLINDRICAL_SURFACE('',#1362,1.25E-1);
#1365=ORIENTED_EDGE('',*,*,#1364,.T.);
#1367=ORIENTED_EDGE('',*,*,#1366,.F.);
#1368=ORIENTED_EDGE('',*,*,#1337,.T.);
#1370=ORIENTED_EDGE('',*,*,#1369,.T.);
#1371=EDGE_LOOP('',(#1365,#1367,#1368,#1370));
#1372=FACE_OUTER_BOUND('',#1371,.F.);
#1374=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,-4.5E-1));
#1375=DIRECTION('',(0.E0,0.E0,-1.E0));
#1376=DIRECTION('',(1.E0,0.E0,0.E0));
#1377=AXIS2_PLACEMENT_3D('',#1374,#1375,#1376);
#1378=PLANE('',#1377);
#1379=ORIENTED_EDGE('',*,*,#1364,.F.);
#1381=ORIENTED_EDGE('',*,*,#1380,.F.);
#1383=ORIENTED_EDGE('',*,*,#1382,.F.);
#1385=ORIENTED_EDGE('',*,*,#1384,.T.);
#1387=ORIENTED_EDGE('',*,*,#1386,.T.);
#1389=ORIENTED_EDGE('',*,*,#1388,.T.);
#1391=ORIENTED_EDGE('',*,*,#1390,.T.);
#1393=ORIENTED_EDGE('',*,*,#1392,.F.);
#1394=ORIENTED_EDGE('',*,*,#1325,.F.);
#1396=ORIENTED_EDGE('',*,*,#1395,.F.);
#1397=EDGE_LOOP('',(#1379,#1381,#1383,#1385,#1387,#1389,#1391,#1393,#1394,
#1396));
#1398=FACE_OUTER_BOUND('',#1397,.F.);
#1400=CARTESIAN_POINT('',(0.E0,1.25E-1,0.E0));
#1401=DIRECTION('',(0.E0,-1.E0,0.E0));
#1402=DIRECTION('',(1.E0,0.E0,0.E0));
#1403=AXIS2_PLACEMENT_3D('',#1400,#1401,#1402);
#1404=PLANE('',#1403);
#1405=ORIENTED_EDGE('',*,*,#1369,.F.);
#1406=ORIENTED_EDGE('',*,*,#1354,.T.);
#1408=ORIENTED_EDGE('',*,*,#1407,.T.);
#1409=ORIENTED_EDGE('',*,*,#1380,.T.);
#1410=EDGE_LOOP('',(#1405,#1406,#1408,#1409));
#1411=FACE_OUTER_BOUND('',#1410,.F.);
#1413=CARTESIAN_POINT('',(7.910917758137E-1,0.E0,4.5E-1));
#1414=DIRECTION('',(-1.E0,0.E0,0.E0));
#1415=DIRECTION('',(0.E0,0.E0,-1.E0));
#1416=AXIS2_PLACEMENT_3D('',#1413,#1414,#1415);
#1417=PLANE('',#1416);
#1419=ORIENTED_EDGE('',*,*,#1418,.T.);
#1420=ORIENTED_EDGE('',*,*,#1382,.T.);
#1421=ORIENTED_EDGE('',*,*,#1407,.F.);
#1422=ORIENTED_EDGE('',*,*,#1352,.F.);
#1423=EDGE_LOOP('',(#1419,#1420,#1421,#1422));
#1424=FACE_OUTER_BOUND('',#1423,.F.);
#1426=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1427=DIRECTION('',(0.E0,-1.E0,0.E0));
#1428=DIRECTION('',(1.E0,0.E0,0.E0));
#1429=AXIS2_PLACEMENT_3D('',#1426,#1427,#1428);
#1430=PLANE('',#1429);
#1432=ORIENTED_EDGE('',*,*,#1431,.F.);
#1433=ORIENTED_EDGE('',*,*,#1384,.F.);
#1434=ORIENTED_EDGE('',*,*,#1418,.F.);
#1435=ORIENTED_EDGE('',*,*,#1350,.F.);
#1436=EDGE_LOOP('',(#1432,#1433,#1434,#1435));
#1437=FACE_OUTER_BOUND('',#1436,.F.);
#1439=CARTESIAN_POINT('',(1.E0,0.E0,4.5E-1));
#1440=DIRECTION('',(-1.E0,0.E0,0.E0));
#1441=DIRECTION('',(0.E0,0.E0,-1.E0));
#1442=AXIS2_PLACEMENT_3D('',#1439,#1440,#1441);
#1443=PLANE('',#1442);
#1445=ORIENTED_EDGE('',*,*,#1444,.T.);
#1446=ORIENTED_EDGE('',*,*,#1386,.F.);
#1447=ORIENTED_EDGE('',*,*,#1431,.T.);
#1448=ORIENTED_EDGE('',*,*,#1348,.T.);
#1449=EDGE_LOOP('',(#1445,#1446,#1447,#1448));
#1450=FACE_OUTER_BOUND('',#1449,.F.);
#1452=CARTESIAN_POINT('',(1.E0,-3.75E-1,4.5E-1));
#1453=DIRECTION('',(0.E0,1.E0,0.E0));
#1454=DIRECTION('',(0.E0,0.E0,-1.E0));
#1455=AXIS2_PLACEMENT_3D('',#1452,#1453,#1454);
#1456=PLANE('',#1455);
#1457=ORIENTED_EDGE('',*,*,#1444,.F.);
#1458=ORIENTED_EDGE('',*,*,#1346,.T.);
#1460=ORIENTED_EDGE('',*,*,#1459,.T.);
#1461=ORIENTED_EDGE('',*,*,#1388,.F.);
#1462=EDGE_LOOP('',(#1457,#1458,#1460,#1461));
#1463=FACE_OUTER_BOUND('',#1462,.F.);
#1465=CARTESIAN_POINT('',(6.7E-1,-5.E-1,0.E0));
#1466=DIRECTION('',(-1.E0,0.E0,0.E0));
#1467=DIRECTION('',(0.E0,-1.E0,0.E0));
#1468=AXIS2_PLACEMENT_3D('',#1465,#1466,#1467);
#1469=PLANE('',#1468);
#1470=ORIENTED_EDGE('',*,*,#1344,.F.);
#1472=ORIENTED_EDGE('',*,*,#1471,.F.);
#1473=ORIENTED_EDGE('',*,*,#1390,.F.);
#1474=ORIENTED_EDGE('',*,*,#1459,.F.);
#1475=EDGE_LOOP('',(#1470,#1472,#1473,#1474));
#1476=FACE_OUTER_BOUND('',#1475,.F.);
#1478=CARTESIAN_POINT('',(0.E0,-5.E-1,0.E0));
#1479=DIRECTION('',(0.E0,-1.E0,0.E0));
#1480=DIRECTION('',(1.E0,0.E0,0.E0));
#1481=AXIS2_PLACEMENT_3D('',#1478,#1479,#1480);
#1482=PLANE('',#1481);
#1483=ORIENTED_EDGE('',*,*,#1327,.F.);
#1484=ORIENTED_EDGE('',*,*,#1392,.T.);
#1485=ORIENTED_EDGE('',*,*,#1471,.T.);
#1486=ORIENTED_EDGE('',*,*,#1342,.T.);
#1487=EDGE_LOOP('',(#1483,#1484,#1485,#1486));
#1488=FACE_OUTER_BOUND('',#1487,.F.);
#1490=CARTESIAN_POINT('',(1.125E0,0.E0,-4.5E-1));
#1491=DIRECTION('',(1.E0,0.E0,0.E0));
#1492=DIRECTION('',(0.E0,0.E0,1.E0));
#1493=AXIS2_PLACEMENT_3D('',#1490,#1491,#1492);
#1494=PLANE('',#1493);
#1495=ORIENTED_EDGE('',*,*,#1366,.T.);
#1496=ORIENTED_EDGE('',*,*,#1395,.T.);
#1497=ORIENTED_EDGE('',*,*,#1323,.T.);
#1498=ORIENTED_EDGE('',*,*,#1339,.T.);
#1499=EDGE_LOOP('',(#1495,#1496,#1497,#1498));
#1500=FACE_OUTER_BOUND('',#1499,.F.);
#1502=CLOSED_SHELL('',(#1331,#1358,#1373,#1399,#1412,#1425,#1438,#1451,#1464,
#1477,#1489,#1501));
#1503=MANIFOLD_SOLID_BREP('',#1502);
#1504=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1505=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1506=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1507=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1506);
#1508=(CONVERSION_BASED_UNIT('DEGREE',#1507)NAMED_UNIT(#1505)PLANE_ANGLE_UNIT(
));
#1509=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1510=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.502523518375E-4),#1504,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1512=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1513=DIRECTION('',(0.E0,0.E0,1.E0));
#1514=DIRECTION('',(1.E0,0.E0,0.E0));
#1517=MECHANICAL_CONTEXT('',#777,'mechanical');
#1518=PRODUCT('LF','LF','NOT SPECIFIED',(#1517));
#1519=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1518,.MADE.);
#1525=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1526=DIRECTION('',(0.E0,0.E0,1.E0));
#1527=DIRECTION('',(1.E0,0.E0,0.E0));
#1528=AXIS2_PLACEMENT_3D('',#1525,#1526,#1527);
#1529=ITEM_DEFINED_TRANSFORMATION('','',#1515,#1528);
#1530=(REPRESENTATION_RELATIONSHIP('','',#1516,#788)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1529)SHAPE_REPRESENTATION_RELATIONSHIP());
#1531=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1530,#1524);
#1532=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1533=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1534=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1535=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1534);
#1536=(CONVERSION_BASED_UNIT('DEGREE',#1535)NAMED_UNIT(#1533)PLANE_ANGLE_UNIT(
));
#1537=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1538=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.017267899366E-4),#1532,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1540=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1541=DIRECTION('',(0.E0,0.E0,1.E0));
#1542=DIRECTION('',(1.E0,0.E0,0.E0));
#1544=DESIGN_CONTEXT('',#777,'design');
#1545=MECHANICAL_CONTEXT('',#777,'mechanical');
#1546=PRODUCT('6521_ASM','6521_ASM','NOT SPECIFIED',(#1545));
#1547=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1546,.MADE.);
#1549=PRODUCT_CATEGORY('part','');
#1550=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#1546));
#1551=PRODUCT_CATEGORY_RELATIONSHIP('','',#1549,#1550);
#1552=PRODUCT_CATEGORY('part','');
#1553=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#781,#1518));
#1554=PRODUCT_CATEGORY_RELATIONSHIP('','',#1552,#1553);
#1555=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#1556=SECURITY_CLASSIFICATION('','',#1555);
#1557=CC_DESIGN_SECURITY_CLASSIFICATION(#1556,(#782,#1519,#1547,#789,#1523));
#1558=APPROVAL_STATUS('approved');
#1559=APPROVAL(#1558,'');
#1560=CC_DESIGN_APPROVAL(#1559,(#1556,#782,#1519,#1547,#783,#1520,#1548));
#1561=CALENDAR_DATE(113,14,11);
#1562=COORDINATED_UNIVERSAL_TIME_OFFSET(8,0,.AHEAD.);
#1563=LOCAL_TIME(16,20,4.E0,#1562);
#1564=DATE_AND_TIME(#1561,#1563);
#1565=APPROVAL_DATE_TIME(#1564,#1559);
#1566=DATE_TIME_ROLE('creation_date');
#1567=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1564,#1566,(#783,#1520,#1548));
#1568=DATE_TIME_ROLE('classification_date');
#1569=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1564,#1568,(#1556));
#1570=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#1571=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#1572=PERSON_AND_ORGANIZATION(#1570,#1571);
#1573=APPROVAL_ROLE('approver');
#1574=APPROVAL_PERSON_ORGANIZATION(#1572,#1559,#1573);
#1575=PERSON_AND_ORGANIZATION_ROLE('creator');
#1576=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1572,#1575,(#782,#1519,
#1547,#783,#1520,#1548));
#1577=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#1578=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1572,#1577,(#782,#1519,
#1547));
#1579=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#1580=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1572,#1579,(#1556));
#1581=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#1582=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1572,#1581,(#1546,#781,
#1518));
#65=CIRCLE('',#64,5.5E-1);
#74=CIRCLE('',#73,5.5E-1);
#115=CIRCLE('',#114,5.5E-1);
#124=CIRCLE('',#123,5.5E-1);
#173=CIRCLE('',#172,3.E-1);
#178=CIRCLE('',#177,3.E-1);
#231=CIRCLE('',#230,2.320626178122E-1);
#236=CIRCLE('',#235,2.320626178122E-1);
#241=CIRCLE('',#240,1.5E-1);
#250=CIRCLE('',#249,1.5E-1);
#259=CIRCLE('',#258,1.5E-1);
#264=CIRCLE('',#263,1.5E-1);
#354=EDGE_CURVE('',#267,#268,#4,.T.);
#356=EDGE_CURVE('',#268,#270,#8,.T.);
#358=EDGE_CURVE('',#270,#272,#12,.T.);
#360=EDGE_CURVE('',#272,#267,#16,.T.);
#364=EDGE_CURVE('',#281,#282,#20,.T.);
#366=EDGE_CURVE('',#282,#284,#24,.T.);
#368=EDGE_CURVE('',#284,#286,#28,.T.);
#370=EDGE_CURVE('',#286,#281,#32,.T.);
#374=ADVANCED_FACE('',(#363,#373),#353,.F.);
#380=EDGE_CURVE('',#292,#289,#36,.T.);
#382=EDGE_CURVE('',#289,#275,#60,.T.);
#384=EDGE_CURVE('',#268,#275,#94,.T.);
#387=EDGE_CURVE('',#267,#292,#40,.T.);
#391=ADVANCED_FACE('',(#390),#379,.T.);
#397=EDGE_CURVE('',#289,#290,#44,.T.);
#400=EDGE_CURVE('',#292,#290,#82,.T.);
#404=ADVANCED_FACE('',(#403),#396,.T.);
#411=EDGE_CURVE('',#278,#290,#48,.T.);
#413=EDGE_CURVE('',#276,#278,#52,.T.);
#415=EDGE_CURVE('',#275,#276,#56,.T.);
#420=EDGE_CURVE('',#303,#304,#65,.T.);
#422=EDGE_CURVE('',#304,#306,#69,.T.);
#424=EDGE_CURVE('',#306,#308,#74,.T.);
#426=EDGE_CURVE('',#308,#303,#78,.T.);
#430=ADVANCED_FACE('',(#419,#429),#409,.T.);
#439=EDGE_CURVE('',#272,#278,#86,.T.);
#444=ADVANCED_FACE('',(#443),#435,.T.);
#451=EDGE_CURVE('',#270,#276,#90,.T.);
#457=ADVANCED_FACE('',(#456),#449,.T.);
#469=ADVANCED_FACE('',(#468),#462,.T.);
#476=EDGE_CURVE('',#303,#295,#98,.T.);
#478=EDGE_CURVE('',#295,#296,#115,.T.);
#480=EDGE_CURVE('',#304,#296,#110,.T.);
#484=ADVANCED_FACE('',(#483),#474,.F.);
#491=EDGE_CURVE('',#308,#300,#102,.T.);
#493=EDGE_CURVE('',#300,#295,#119,.T.);
#498=ADVANCED_FACE('',(#497),#489,.F.);
#505=EDGE_CURVE('',#306,#298,#106,.T.);
#507=EDGE_CURVE('',#298,#300,#124,.T.);
#512=ADVANCED_FACE('',(#511),#503,.F.);
#520=EDGE_CURVE('',#296,#298,#128,.T.);
#525=ADVANCED_FACE('',(#524),#517,.F.);
#537=ADVANCED_FACE('',(#536),#530,.T.);
#543=EDGE_CURVE('',#318,#311,#132,.T.);
#545=EDGE_CURVE('',#320,#318,#136,.T.);
#547=EDGE_CURVE('',#282,#320,#218,.T.);
#550=EDGE_CURVE('',#281,#323,#140,.T.);
#552=EDGE_CURVE('',#323,#324,#144,.T.);
#554=EDGE_CURVE('',#315,#324,#148,.T.);
#556=EDGE_CURVE('',#315,#311,#160,.T.);
#560=ADVANCED_FACE('',(#559),#542,.T.);
#566=EDGE_CURVE('',#311,#312,#156,.T.);
#568=EDGE_CURVE('',#328,#312,#194,.T.);
#570=EDGE_CURVE('',#318,#328,#152,.T.);
#575=ADVANCED_FACE('',(#574),#565,.F.);
#583=EDGE_CURVE('',#315,#316,#164,.T.);
#585=EDGE_CURVE('',#312,#316,#168,.T.);
#589=EDGE_CURVE('',#347,#348,#173,.T.);
#591=EDGE_CURVE('',#348,#347,#178,.T.);
#595=ADVANCED_FACE('',(#588,#594),#580,.T.);
#603=EDGE_CURVE('',#324,#332,#182,.T.);
#605=EDGE_CURVE('',#316,#332,#198,.T.);
#609=ADVANCED_FACE('',(#608),#600,.F.);
#616=EDGE_CURVE('',#331,#323,#186,.T.);
#618=EDGE_CURVE('',#331,#332,#202,.T.);
#623=ADVANCED_FACE('',(#622),#614,.F.);
#632=EDGE_CURVE('',#286,#331,#190,.T.);
#636=ADVANCED_FACE('',(#635),#628,.T.);
#648=EDGE_CURVE('',#284,#326,#206,.T.);
#650=EDGE_CURVE('',#326,#328,#210,.T.);
#654=ADVANCED_FACE('',(#653),#641,.T.);
#660=EDGE_CURVE('',#320,#326,#214,.T.);
#667=ADVANCED_FACE('',(#666),#659,.T.);
#679=ADVANCED_FACE('',(#678),#672,.F.);
#686=EDGE_CURVE('',#347,#344,#226,.T.);
#688=EDGE_CURVE('',#343,#344,#236,.T.);
#690=EDGE_CURVE('',#348,#343,#222,.T.);
#694=ADVANCED_FACE('',(#693),#684,.F.);
#702=EDGE_CURVE('',#343,#344,#231,.T.);
#707=ADVANCED_FACE('',(#706),#699,.F.);
#717=EDGE_CURVE('',#340,#336,#241,.T.);
#719=EDGE_CURVE('',#340,#336,#250,.T.);
#723=ADVANCED_FACE('',(#716,#722),#712,.T.);
#729=EDGE_CURVE('',#335,#336,#245,.T.);
#731=EDGE_CURVE('',#339,#335,#264,.T.);
#733=EDGE_CURVE('',#339,#340,#254,.T.);
#738=ADVANCED_FACE('',(#737),#728,.T.);
#747=EDGE_CURVE('',#339,#335,#259,.T.);
#751=ADVANCED_FACE('',(#750),#743,.T.);
#761=ADVANCED_FACE('',(#760),#756,.T.);
#771=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#770))GLOBAL_UNIT_ASSIGNED_CONTEXT((#764,#768,#769))REPRESENTATION_CONTEXT
('ID1','3'));
#775=AXIS2_PLACEMENT_3D('',#772,#773,#774);
#776=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#775,#763),#771);
#783=PRODUCT_DEFINITION('design','',#782,#779);
#784=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 6521.',#783);
#785=SHAPE_DEFINITION_REPRESENTATION(#784,#776);
#786=SHAPE_DEFINITION_REPRESENTATION(#787,#788);
#787=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 6521_ASM.',#1548);
#788=SHAPE_REPRESENTATION('',(#794,#1528,#1543),#1539);
#789=NEXT_ASSEMBLY_USAGE_OCCURRENCE('0','Next assembly relationship','6521',
#1548,#783,$);
#790=PRODUCT_DEFINITION_SHAPE('Placement #0',
'Placement of 6521 with respect to 6521_ASM',#789);
#803=CIRCLE('',#802,1.25E-1);
#808=CIRCLE('',#807,1.25E-1);
#825=CIRCLE('',#824,1.25E-1);
#830=CIRCLE('',#829,1.25E-1);
#968=EDGE_CURVE('',#957,#958,#808,.T.);
#970=EDGE_CURVE('',#960,#958,#918,.T.);
#972=EDGE_CURVE('',#960,#962,#830,.T.);
#974=EDGE_CURVE('',#962,#957,#898,.T.);
#978=ADVANCED_FACE('',(#977),#967,.T.);
#984=EDGE_CURVE('',#952,#954,#803,.T.);
#986=EDGE_CURVE('',#958,#952,#922,.T.);
#989=EDGE_CURVE('',#938,#957,#906,.T.);
#991=EDGE_CURVE('',#936,#938,#890,.T.);
#993=EDGE_CURVE('',#942,#936,#812,.T.);
#995=EDGE_CURVE('',#945,#942,#816,.T.);
#997=EDGE_CURVE('',#926,#945,#866,.T.);
#999=EDGE_CURVE('',#926,#930,#820,.T.);
#1001=EDGE_CURVE('',#930,#954,#838,.T.);
#1005=ADVANCED_FACE('',(#1004),#983,.F.);
#1011=EDGE_CURVE('',#949,#950,#825,.T.);
#1013=EDGE_CURVE('',#952,#950,#910,.T.);
#1016=EDGE_CURVE('',#954,#949,#834,.T.);
#1020=ADVANCED_FACE('',(#1019),#1010,.T.);
#1027=EDGE_CURVE('',#949,#929,#846,.T.);
#1029=EDGE_CURVE('',#925,#929,#850,.T.);
#1031=EDGE_CURVE('',#946,#925,#858,.T.);
#1033=EDGE_CURVE('',#946,#940,#874,.T.);
#1035=EDGE_CURVE('',#940,#934,#878,.T.);
#1037=EDGE_CURVE('',#933,#934,#882,.T.);
#1039=EDGE_CURVE('',#962,#933,#902,.T.);
#1042=EDGE_CURVE('',#950,#960,#914,.T.);
#1046=ADVANCED_FACE('',(#1045),#1025,.F.);
#1054=EDGE_CURVE('',#929,#930,#842,.T.);
#1059=ADVANCED_FACE('',(#1058),#1051,.T.);
#1065=EDGE_CURVE('',#925,#926,#862,.T.);
#1072=ADVANCED_FACE('',(#1071),#1064,.F.);
#1078=EDGE_CURVE('',#945,#946,#854,.T.);
#1085=ADVANCED_FACE('',(#1084),#1077,.F.);
#1091=EDGE_CURVE('',#940,#942,#870,.T.);
#1098=ADVANCED_FACE('',(#1097),#1090,.F.);
#1107=EDGE_CURVE('',#934,#936,#886,.T.);
#1111=ADVANCED_FACE('',(#1110),#1103,.F.);
#1120=EDGE_CURVE('',#938,#933,#894,.T.);
#1124=ADVANCED_FACE('',(#1123),#1116,.F.);
#1136=ADVANCED_FACE('',(#1135),#1129,.F.);
#1148=ADVANCED_FACE('',(#1147),#1141,.F.);
#1156=CIRCLE('',#1155,1.25E-1);
#1161=CIRCLE('',#1160,1.25E-1);
#1166=CIRCLE('',#1165,1.25E-1);
#1183=CIRCLE('',#1182,1.25E-1);
#1321=EDGE_CURVE('',#1310,#1311,#1161,.T.);
#1323=EDGE_CURVE('',#1313,#1311,#1271,.T.);
#1325=EDGE_CURVE('',#1313,#1315,#1183,.T.);
#1327=EDGE_CURVE('',#1315,#1310,#1251,.T.);
#1331=ADVANCED_FACE('',(#1330),#1320,.T.);
#1337=EDGE_CURVE('',#1305,#1307,#1156,.T.);
#1339=EDGE_CURVE('',#1311,#1305,#1275,.T.);
#1342=EDGE_CURVE('',#1290,#1310,#1259,.T.);
#1344=EDGE_CURVE('',#1290,#1291,#1235,.T.);
#1346=EDGE_CURVE('',#1298,#1291,#1231,.T.);
#1348=EDGE_CURVE('',#1287,#1298,#1227,.T.);
#1350=EDGE_CURVE('',#1287,#1278,#1219,.T.);
#1352=EDGE_CURVE('',#1278,#1282,#1203,.T.);
#1354=EDGE_CURVE('',#1307,#1282,#1191,.T.);
#1358=ADVANCED_FACE('',(#1357),#1336,.T.);
#1364=EDGE_CURVE('',#1302,#1303,#1166,.T.);
#1366=EDGE_CURVE('',#1305,#1303,#1263,.T.);
#1369=EDGE_CURVE('',#1307,#1302,#1187,.T.);
#1373=ADVANCED_FACE('',(#1372),#1363,.T.);
#1380=EDGE_CURVE('',#1283,#1302,#1199,.T.);
#1382=EDGE_CURVE('',#1279,#1283,#1170,.T.);
#1384=EDGE_CURVE('',#1279,#1286,#1211,.T.);
#1386=EDGE_CURVE('',#1286,#1299,#1174,.T.);
#1388=EDGE_CURVE('',#1299,#1293,#1178,.T.);
#1390=EDGE_CURVE('',#1293,#1295,#1243,.T.);
#1392=EDGE_CURVE('',#1315,#1295,#1255,.T.);
#1395=EDGE_CURVE('',#1303,#1313,#1267,.T.);
#1399=ADVANCED_FACE('',(#1398),#1378,.T.);
#1407=EDGE_CURVE('',#1282,#1283,#1195,.T.);
#1412=ADVANCED_FACE('',(#1411),#1404,.F.);
#1418=EDGE_CURVE('',#1278,#1279,#1215,.T.);
#1425=ADVANCED_FACE('',(#1424),#1417,.T.);
#1431=EDGE_CURVE('',#1286,#1287,#1207,.T.);
#1438=ADVANCED_FACE('',(#1437),#1430,.T.);
#1444=EDGE_CURVE('',#1298,#1299,#1223,.T.);
#1451=ADVANCED_FACE('',(#1450),#1443,.T.);
#1459=EDGE_CURVE('',#1291,#1293,#1247,.T.);
#1464=ADVANCED_FACE('',(#1463),#1456,.T.);
#1471=EDGE_CURVE('',#1295,#1290,#1239,.T.);
#1477=ADVANCED_FACE('',(#1476),#1469,.T.);
#1489=ADVANCED_FACE('',(#1488),#1482,.T.);
#1501=ADVANCED_FACE('',(#1500),#1494,.T.);
#1511=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1510))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1504,#1508,#1509))REPRESENTATION_CONTEXT(
'ID2','3'));
#1515=AXIS2_PLACEMENT_3D('',#1512,#1513,#1514);
#1516=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1515,#1150,#1503),#1511);
#1520=PRODUCT_DEFINITION('design','',#1519,#779);
#1521=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LF.',#1520);
#1522=SHAPE_DEFINITION_REPRESENTATION(#1521,#1516);
#1523=NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','Next assembly relationship','LF',
#1548,#1520,$);
#1524=PRODUCT_DEFINITION_SHAPE('Placement #1',
'Placement of LF with respect to 6521_ASM',#1523);
#1539=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1538))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1532,#1536,#1537))REPRESENTATION_CONTEXT(
'ID3','3'));
#1543=AXIS2_PLACEMENT_3D('',#1540,#1541,#1542);
#1548=PRODUCT_DEFINITION('design','',#1547,#1544);
ENDSEC;
END-ISO-10303-21;