ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('IR928-6C_ASM','2013-11-25T',('kenchen'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009360',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009360','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=CARTESIAN_POINT('',(0.E0,6.6E-1,0.E0));
#2=DIRECTION('',(0.E0,0.E0,1.E0));
#3=DIRECTION('',(0.E0,1.E0,0.E0));
#4=AXIS2_PLACEMENT_3D('',#1,#2,#3);
#6=CARTESIAN_POINT('',(0.E0,6.6E-1,0.E0));
#7=DIRECTION('',(0.E0,0.E0,-1.E0));
#8=DIRECTION('',(0.E0,1.E0,0.E0));
#9=AXIS2_PLACEMENT_3D('',#6,#7,#8);
#11=DIRECTION('',(0.E0,1.E0,0.E0));
#12=VECTOR('',#11,1.755453387609E0);
#13=CARTESIAN_POINT('',(2.E0,-2.205453387609E0,0.E0));
#14=LINE('',#13,#12);
#15=DIRECTION('',(1.E0,0.E0,0.E0));
#16=VECTOR('',#15,2.554533876094E-1);
#17=CARTESIAN_POINT('',(2.E0,-2.205453387609E0,0.E0));
#18=LINE('',#17,#16);
#19=DIRECTION('',(0.E0,1.E0,0.E0));
#20=VECTOR('',#19,4.410906775219E0);
#21=CARTESIAN_POINT('',(2.255453387609E0,-2.205453387609E0,0.E0));
#22=LINE('',#21,#20);
#23=DIRECTION('',(-1.E0,0.E0,0.E0));
#24=VECTOR('',#23,4.510906775219E0);
#25=CARTESIAN_POINT('',(2.255453387609E0,2.205453387609E0,0.E0));
#26=LINE('',#25,#24);
#27=DIRECTION('',(0.E0,-1.E0,0.E0));
#28=VECTOR('',#27,4.410906775219E0);
#29=CARTESIAN_POINT('',(-2.255453387609E0,2.205453387609E0,0.E0));
#30=LINE('',#29,#28);
#31=DIRECTION('',(1.E0,0.E0,0.E0));
#32=VECTOR('',#31,2.554533876094E-1);
#33=CARTESIAN_POINT('',(-2.255453387609E0,-2.205453387609E0,0.E0));
#34=LINE('',#33,#32);
#35=DIRECTION('',(0.E0,1.E0,0.E0));
#36=VECTOR('',#35,1.755453387609E0);
#37=CARTESIAN_POINT('',(-2.E0,-2.205453387609E0,0.E0));
#38=LINE('',#37,#36);
#39=DIRECTION('',(1.E0,0.E0,0.E0));
#40=VECTOR('',#39,4.E0);
#41=CARTESIAN_POINT('',(-2.E0,-4.5E-1,0.E0));
#42=LINE('',#41,#40);
#43=DIRECTION('',(0.E0,0.E0,1.E0));
#44=VECTOR('',#43,1.E-1);
#45=CARTESIAN_POINT('',(2.E0,-4.5E-1,0.E0));
#46=LINE('',#45,#44);
#47=DIRECTION('',(0.E0,0.E0,1.E0));
#48=VECTOR('',#47,1.E-1);
#49=CARTESIAN_POINT('',(-2.E0,-4.5E-1,0.E0));
#50=LINE('',#49,#48);
#51=DIRECTION('',(-1.E0,0.E0,0.E0));
#52=VECTOR('',#51,4.E0);
#53=CARTESIAN_POINT('',(2.E0,-2.210694165538E0,1.E-1));
#54=LINE('',#53,#52);
#55=DIRECTION('',(0.E0,-5.233595624294E-2,9.986295347546E-1));
#56=VECTOR('',#55,1.001372345998E-1);
#57=CARTESIAN_POINT('',(-2.E0,-2.205453387609E0,0.E0));
#58=LINE('',#57,#56);
#59=DIRECTION('',(-5.226442768871E-2,-5.226442768871E-2,9.972646886342E-1));
#60=VECTOR('',#59,8.523313917432E-1);
#61=CARTESIAN_POINT('',(-2.255453387609E0,-2.205453387609E0,0.E0));
#62=LINE('',#61,#60);
#63=DIRECTION('',(0.E0,-5.233595624294E-2,9.986295347546E-1));
#64=VECTOR('',#63,1.001372345998E-1);
#65=CARTESIAN_POINT('',(2.E0,-2.205453387609E0,0.E0));
#66=LINE('',#65,#64);
#67=DIRECTION('',(0.E0,-1.E0,0.E0));
#68=VECTOR('',#67,1.760694165538E0);
#69=CARTESIAN_POINT('',(2.E0,-4.5E-1,1.E-1));
#70=LINE('',#69,#68);
#71=DIRECTION('',(1.E0,0.E0,0.E0));
#72=VECTOR('',#71,4.E0);
#73=CARTESIAN_POINT('',(-2.E0,-4.5E-1,1.E-1));
#74=LINE('',#73,#72);
#75=DIRECTION('',(0.E0,1.E0,0.E0));
#76=VECTOR('',#75,1.760694165538E0);
#77=CARTESIAN_POINT('',(-2.E0,-2.210694165538E0,1.E-1));
#78=LINE('',#77,#76);
#79=DIRECTION('',(-5.226442768871E-2,5.226442768871E-2,9.972646886342E-1));
#80=VECTOR('',#79,8.523313917432E-1);
#81=CARTESIAN_POINT('',(-2.255453387609E0,2.205453387609E0,0.E0));
#82=LINE('',#81,#80);
#83=DIRECTION('',(5.226442768871E-2,5.226442768871E-2,9.972646886342E-1));
#84=VECTOR('',#83,8.523313917432E-1);
#85=CARTESIAN_POINT('',(2.255453387609E0,2.205453387609E0,0.E0));
#86=LINE('',#85,#84);
#87=DIRECTION('',(-1.E0,0.E0,0.E0));
#88=VECTOR('',#87,4.6E0);
#89=CARTESIAN_POINT('',(2.3E0,2.25E0,8.5E-1));
#90=LINE('',#89,#88);
#91=DIRECTION('',(-5.226442768871E-2,-5.226442768871E-2,9.972646886342E-1));
#92=VECTOR('',#91,8.523313917432E-1);
#93=CARTESIAN_POINT('',(2.3E0,2.25E0,8.5E-1));
#94=LINE('',#93,#92);
#95=DIRECTION('',(0.E0,1.E0,0.E0));
#96=VECTOR('',#95,4.5E0);
#97=CARTESIAN_POINT('',(2.3E0,-2.25E0,8.5E-1));
#98=LINE('',#97,#96);
#99=DIRECTION('',(-5.226442768871E-2,5.226442768871E-2,9.972646886342E-1));
#100=VECTOR('',#99,8.523313917432E-1);
#101=CARTESIAN_POINT('',(2.3E0,-2.25E0,8.5E-1));
#102=LINE('',#101,#100);
#103=DIRECTION('',(5.226442768871E-2,-5.226442768871E-2,9.972646886342E-1));
#104=VECTOR('',#103,8.523313917432E-1);
#105=CARTESIAN_POINT('',(2.255453387609E0,-2.205453387609E0,0.E0));
#106=LINE('',#105,#104);
#107=DIRECTION('',(1.E0,0.E0,0.E0));
#108=VECTOR('',#107,4.6E0);
#109=CARTESIAN_POINT('',(-2.3E0,-2.25E0,8.5E-1));
#110=LINE('',#109,#108);
#111=DIRECTION('',(5.226442768871E-2,5.226442768871E-2,9.972646886342E-1));
#112=VECTOR('',#111,8.523313917432E-1);
#113=CARTESIAN_POINT('',(-2.3E0,-2.25E0,8.5E-1));
#114=LINE('',#113,#112);
#115=DIRECTION('',(5.226442768871E-2,-5.226442768871E-2,9.972646886342E-1));
#116=VECTOR('',#115,8.523313917432E-1);
#117=CARTESIAN_POINT('',(-2.3E0,2.25E0,8.5E-1));
#118=LINE('',#117,#116);
#119=DIRECTION('',(0.E0,-1.E0,0.E0));
#120=VECTOR('',#119,4.5E0);
#121=CARTESIAN_POINT('',(-2.3E0,2.25E0,8.5E-1));
#122=LINE('',#121,#120);
#123=DIRECTION('',(0.E0,-1.E0,0.E0));
#124=VECTOR('',#123,4.410906775219E0);
#125=CARTESIAN_POINT('',(-2.255453387609E0,2.205453387609E0,1.7E0));
#126=LINE('',#125,#124);
#127=DIRECTION('',(-1.E0,0.E0,0.E0));
#128=VECTOR('',#127,4.510906775219E0);
#129=CARTESIAN_POINT('',(2.255453387609E0,2.205453387609E0,1.7E0));
#130=LINE('',#129,#128);
#131=DIRECTION('',(0.E0,1.E0,0.E0));
#132=VECTOR('',#131,4.410906775219E0);
#133=CARTESIAN_POINT('',(2.255453387609E0,-2.205453387609E0,1.7E0));
#134=LINE('',#133,#132);
#135=DIRECTION('',(1.E0,0.E0,0.E0));
#136=VECTOR('',#135,4.510906775219E0);
#137=CARTESIAN_POINT('',(-2.255453387609E0,-2.205453387609E0,1.7E0));
#138=LINE('',#137,#136);
#139=CARTESIAN_POINT('',(-2.255453387609E0,2.205453387609E0,0.E0));
#140=CARTESIAN_POINT('',(-2.255453387609E0,-2.205453387609E0,0.E0));
#141=VERTEX_POINT('',#139);
#142=VERTEX_POINT('',#140);
#143=CARTESIAN_POINT('',(2.255453387609E0,-2.205453387609E0,0.E0));
#144=CARTESIAN_POINT('',(2.255453387609E0,2.205453387609E0,0.E0));
#145=VERTEX_POINT('',#143);
#146=VERTEX_POINT('',#144);
#147=CARTESIAN_POINT('',(-2.255453387609E0,2.205453387609E0,1.7E0));
#148=CARTESIAN_POINT('',(-2.255453387609E0,-2.205453387609E0,1.7E0));
#149=VERTEX_POINT('',#147);
#150=VERTEX_POINT('',#148);
#151=CARTESIAN_POINT('',(2.255453387609E0,-2.205453387609E0,1.7E0));
#152=VERTEX_POINT('',#151);
#153=CARTESIAN_POINT('',(2.255453387609E0,2.205453387609E0,1.7E0));
#154=VERTEX_POINT('',#153);
#155=CARTESIAN_POINT('',(-2.3E0,2.25E0,8.5E-1));
#156=CARTESIAN_POINT('',(-2.3E0,-2.25E0,8.5E-1));
#157=VERTEX_POINT('',#155);
#158=VERTEX_POINT('',#156);
#159=CARTESIAN_POINT('',(2.3E0,-2.25E0,8.5E-1));
#160=VERTEX_POINT('',#159);
#161=CARTESIAN_POINT('',(2.3E0,2.25E0,8.5E-1));
#162=VERTEX_POINT('',#161);
#163=CARTESIAN_POINT('',(0.E0,1.41E0,0.E0));
#164=CARTESIAN_POINT('',(0.E0,-9.E-2,0.E0));
#165=VERTEX_POINT('',#163);
#166=VERTEX_POINT('',#164);
#167=CARTESIAN_POINT('',(-2.E0,-4.5E-1,1.E-1));
#168=CARTESIAN_POINT('',(2.E0,-4.5E-1,1.E-1));
#169=VERTEX_POINT('',#167);
#170=VERTEX_POINT('',#168);
#171=CARTESIAN_POINT('',(2.E0,-2.205453387609E0,0.E0));
#172=CARTESIAN_POINT('',(2.E0,-4.5E-1,0.E0));
#173=VERTEX_POINT('',#171);
#174=VERTEX_POINT('',#172);
#175=CARTESIAN_POINT('',(-2.E0,-2.205453387609E0,0.E0));
#176=CARTESIAN_POINT('',(-2.E0,-4.5E-1,0.E0));
#177=VERTEX_POINT('',#175);
#178=VERTEX_POINT('',#176);
#179=CARTESIAN_POINT('',(2.E0,-2.210694165538E0,1.E-1));
#180=CARTESIAN_POINT('',(-2.E0,-2.210694165538E0,1.E-1));
#181=VERTEX_POINT('',#179);
#182=VERTEX_POINT('',#180);
#183=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#184=DIRECTION('',(0.E0,0.E0,1.E0));
#185=DIRECTION('',(1.E0,0.E0,0.E0));
#186=AXIS2_PLACEMENT_3D('',#183,#184,#185);
#187=PLANE('',#186);
#189=ORIENTED_EDGE('',*,*,#188,.F.);
#191=ORIENTED_EDGE('',*,*,#190,.T.);
#193=ORIENTED_EDGE('',*,*,#192,.T.);
#195=ORIENTED_EDGE('',*,*,#194,.T.);
#197=ORIENTED_EDGE('',*,*,#196,.T.);
#199=ORIENTED_EDGE('',*,*,#198,.T.);
#201=ORIENTED_EDGE('',*,*,#200,.T.);
#203=ORIENTED_EDGE('',*,*,#202,.T.);
#204=EDGE_LOOP('',(#189,#191,#193,#195,#197,#199,#201,#203));
#205=FACE_OUTER_BOUND('',#204,.F.);
#207=ORIENTED_EDGE('',*,*,#206,.F.);
#209=ORIENTED_EDGE('',*,*,#208,.T.);
#210=EDGE_LOOP('',(#207,#209));
#211=FACE_BOUND('',#210,.F.);
#213=CARTESIAN_POINT('',(0.E0,6.6E-1,0.E0));
#214=DIRECTION('',(0.E0,-1.E0,0.E0));
#215=DIRECTION('',(1.E0,0.E0,0.E0));
#216=AXIS2_PLACEMENT_3D('',#213,#214,#215);
#217=SPHERICAL_SURFACE('',#216,7.5E-1);
#218=ORIENTED_EDGE('',*,*,#206,.T.);
#219=ORIENTED_EDGE('',*,*,#208,.F.);
#220=EDGE_LOOP('',(#218,#219));
#221=FACE_OUTER_BOUND('',#220,.F.);
#223=CARTESIAN_POINT('',(2.E0,-4.5E-1,0.E0));
#224=DIRECTION('',(1.E0,0.E0,0.E0));
#225=DIRECTION('',(0.E0,-1.E0,0.E0));
#226=AXIS2_PLACEMENT_3D('',#223,#224,#225);
#227=PLANE('',#226);
#228=ORIENTED_EDGE('',*,*,#188,.T.);
#230=ORIENTED_EDGE('',*,*,#229,.T.);
#232=ORIENTED_EDGE('',*,*,#231,.T.);
#234=ORIENTED_EDGE('',*,*,#233,.F.);
#235=EDGE_LOOP('',(#228,#230,#232,#234));
#236=FACE_OUTER_BOUND('',#235,.F.);
#238=CARTESIAN_POINT('',(-2.E0,-4.5E-1,0.E0));
#239=DIRECTION('',(0.E0,1.E0,0.E0));
#240=DIRECTION('',(1.E0,0.E0,0.E0));
#241=AXIS2_PLACEMENT_3D('',#238,#239,#240);
#242=PLANE('',#241);
#243=ORIENTED_EDGE('',*,*,#202,.F.);
#245=ORIENTED_EDGE('',*,*,#244,.T.);
#247=ORIENTED_EDGE('',*,*,#246,.T.);
#248=ORIENTED_EDGE('',*,*,#229,.F.);
#249=EDGE_LOOP('',(#243,#245,#247,#248));
#250=FACE_OUTER_BOUND('',#249,.F.);
#252=CARTESIAN_POINT('',(-2.E0,-2.25E0,0.E0));
#253=DIRECTION('',(-1.E0,0.E0,0.E0));
#254=DIRECTION('',(0.E0,1.E0,0.E0));
#255=AXIS2_PLACEMENT_3D('',#252,#253,#254);
#256=PLANE('',#255);
#257=ORIENTED_EDGE('',*,*,#200,.F.);
#259=ORIENTED_EDGE('',*,*,#258,.T.);
#261=ORIENTED_EDGE('',*,*,#260,.T.);
#262=ORIENTED_EDGE('',*,*,#244,.F.);
#263=EDGE_LOOP('',(#257,#259,#261,#262));
#264=FACE_OUTER_BOUND('',#263,.F.);
#266=CARTESIAN_POINT('',(-2.3E0,-2.25E0,8.5E-1));
#267=DIRECTION('',(0.E0,-9.986295347546E-1,-5.233595624294E-2));
#268=DIRECTION('',(1.E0,0.E0,0.E0));
#269=AXIS2_PLACEMENT_3D('',#266,#267,#268);
#270=PLANE('',#269);
#272=ORIENTED_EDGE('',*,*,#271,.T.);
#273=ORIENTED_EDGE('',*,*,#258,.F.);
#274=ORIENTED_EDGE('',*,*,#198,.F.);
#276=ORIENTED_EDGE('',*,*,#275,.T.);
#278=ORIENTED_EDGE('',*,*,#277,.T.);
#280=ORIENTED_EDGE('',*,*,#279,.F.);
#281=ORIENTED_EDGE('',*,*,#190,.F.);
#282=ORIENTED_EDGE('',*,*,#233,.T.);
#283=EDGE_LOOP('',(#272,#273,#274,#276,#278,#280,#281,#282));
#284=FACE_OUTER_BOUND('',#283,.F.);
#286=CARTESIAN_POINT('',(0.E0,0.E0,1.E-1));
#287=DIRECTION('',(0.E0,0.E0,-1.E0));
#288=DIRECTION('',(-1.E0,0.E0,0.E0));
#289=AXIS2_PLACEMENT_3D('',#286,#287,#288);
#290=PLANE('',#289);
#291=ORIENTED_EDGE('',*,*,#271,.F.);
#292=ORIENTED_EDGE('',*,*,#231,.F.);
#293=ORIENTED_EDGE('',*,*,#246,.F.);
#294=ORIENTED_EDGE('',*,*,#260,.F.);
#295=EDGE_LOOP('',(#291,#292,#293,#294));
#296=FACE_OUTER_BOUND('',#295,.F.);
#298=CARTESIAN_POINT('',(-2.3E0,2.25E0,8.5E-1));
#299=DIRECTION('',(-9.986295347546E-1,0.E0,-5.233595624294E-2));
#300=DIRECTION('',(0.E0,-1.E0,0.E0));
#301=AXIS2_PLACEMENT_3D('',#298,#299,#300);
#302=PLANE('',#301);
#304=ORIENTED_EDGE('',*,*,#303,.T.);
#306=ORIENTED_EDGE('',*,*,#305,.T.);
#307=ORIENTED_EDGE('',*,*,#275,.F.);
#308=ORIENTED_EDGE('',*,*,#196,.F.);
#309=EDGE_LOOP('',(#304,#306,#307,#308));
#310=FACE_OUTER_BOUND('',#309,.F.);
#312=CARTESIAN_POINT('',(2.3E0,2.25E0,8.5E-1));
#313=DIRECTION('',(0.E0,9.986295347546E-1,-5.233595624294E-2));
#314=DIRECTION('',(-1.E0,0.E0,0.E0));
#315=AXIS2_PLACEMENT_3D('',#312,#313,#314);
#316=PLANE('',#315);
#318=ORIENTED_EDGE('',*,*,#317,.T.);
#319=ORIENTED_EDGE('',*,*,#303,.F.);
#320=ORIENTED_EDGE('',*,*,#194,.F.);
#322=ORIENTED_EDGE('',*,*,#321,.T.);
#323=EDGE_LOOP('',(#318,#319,#320,#322));
#324=FACE_OUTER_BOUND('',#323,.F.);
#326=CARTESIAN_POINT('',(2.3E0,2.25E0,8.5E-1));
#327=DIRECTION('',(0.E0,9.986295347546E-1,5.233595624294E-2));
#328=DIRECTION('',(-1.E0,0.E0,0.E0));
#329=AXIS2_PLACEMENT_3D('',#326,#327,#328);
#330=PLANE('',#329);
#331=ORIENTED_EDGE('',*,*,#317,.F.);
#333=ORIENTED_EDGE('',*,*,#332,.T.);
#335=ORIENTED_EDGE('',*,*,#334,.T.);
#337=ORIENTED_EDGE('',*,*,#336,.F.);
#338=EDGE_LOOP('',(#331,#333,#335,#337));
#339=FACE_OUTER_BOUND('',#338,.F.);
#341=CARTESIAN_POINT('',(2.3E0,-2.25E0,8.5E-1));
#342=DIRECTION('',(9.986295347546E-1,0.E0,5.233595624294E-2));
#343=DIRECTION('',(0.E0,1.E0,0.E0));
#344=AXIS2_PLACEMENT_3D('',#341,#342,#343);
#345=PLANE('',#344);
#346=ORIENTED_EDGE('',*,*,#332,.F.);
#348=ORIENTED_EDGE('',*,*,#347,.F.);
#350=ORIENTED_EDGE('',*,*,#349,.T.);
#352=ORIENTED_EDGE('',*,*,#351,.T.);
#353=EDGE_LOOP('',(#346,#348,#350,#352));
#354=FACE_OUTER_BOUND('',#353,.F.);
#356=CARTESIAN_POINT('',(2.3E0,-2.25E0,8.5E-1));
#357=DIRECTION('',(9.986295347546E-1,0.E0,-5.233595624294E-2));
#358=DIRECTION('',(0.E0,1.E0,0.E0));
#359=AXIS2_PLACEMENT_3D('',#356,#357,#358);
#360=PLANE('',#359);
#361=ORIENTED_EDGE('',*,*,#321,.F.);
#362=ORIENTED_EDGE('',*,*,#192,.F.);
#363=ORIENTED_EDGE('',*,*,#279,.T.);
#364=ORIENTED_EDGE('',*,*,#347,.T.);
#365=EDGE_LOOP('',(#361,#362,#363,#364));
#366=FACE_OUTER_BOUND('',#365,.F.);
#368=CARTESIAN_POINT('',(-2.3E0,-2.25E0,8.5E-1));
#369=DIRECTION('',(0.E0,-9.986295347546E-1,5.233595624294E-2));
#370=DIRECTION('',(1.E0,0.E0,0.E0));
#371=AXIS2_PLACEMENT_3D('',#368,#369,#370);
#372=PLANE('',#371);
#373=ORIENTED_EDGE('',*,*,#349,.F.);
#374=ORIENTED_EDGE('',*,*,#277,.F.);
#376=ORIENTED_EDGE('',*,*,#375,.T.);
#378=ORIENTED_EDGE('',*,*,#377,.T.);
#379=EDGE_LOOP('',(#373,#374,#376,#378));
#380=FACE_OUTER_BOUND('',#379,.F.);
#382=CARTESIAN_POINT('',(-2.3E0,2.25E0,8.5E-1));
#383=DIRECTION('',(-9.986295347546E-1,0.E0,5.233595624294E-2));
#384=DIRECTION('',(0.E0,-1.E0,0.E0));
#385=AXIS2_PLACEMENT_3D('',#382,#383,#384);
#386=PLANE('',#385);
#387=ORIENTED_EDGE('',*,*,#336,.T.);
#389=ORIENTED_EDGE('',*,*,#388,.T.);
#390=ORIENTED_EDGE('',*,*,#375,.F.);
#391=ORIENTED_EDGE('',*,*,#305,.F.);
#392=EDGE_LOOP('',(#387,#389,#390,#391));
#393=FACE_OUTER_BOUND('',#392,.F.);
#395=CARTESIAN_POINT('',(0.E0,0.E0,1.7E0));
#396=DIRECTION('',(0.E0,0.E0,1.E0));
#397=DIRECTION('',(1.E0,0.E0,0.E0));
#398=AXIS2_PLACEMENT_3D('',#395,#396,#397);
#399=PLANE('',#398);
#400=ORIENTED_EDGE('',*,*,#388,.F.);
#401=ORIENTED_EDGE('',*,*,#334,.F.);
#402=ORIENTED_EDGE('',*,*,#351,.F.);
#403=ORIENTED_EDGE('',*,*,#377,.F.);
#404=EDGE_LOOP('',(#400,#401,#402,#403));
#405=FACE_OUTER_BOUND('',#404,.F.);
#407=CLOSED_SHELL('',(#212,#222,#237,#251,#265,#285,#297,#311,#325,#340,#355,
#367,#381,#394,#406));
#408=MANIFOLD_SOLID_BREP('',#407);
#409=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#410=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#411=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#412=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#411);
#413=(CONVERSION_BASED_UNIT('DEGREE',#412)NAMED_UNIT(#410)PLANE_ANGLE_UNIT());
#414=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#415=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.078283096357E-4),#409,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#417=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#418=DIRECTION('',(0.E0,0.E0,1.E0));
#419=DIRECTION('',(1.E0,0.E0,0.E0));
#422=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#423=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#422);
#424=DESIGN_CONTEXT('',#422,'design');
#425=MECHANICAL_CONTEXT('',#422,'mechanical');
#426=PRODUCT('928-6C-2','928-6C-2','NOT SPECIFIED',(#425));
#427=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION',#426,
.MADE.);
#436=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#437=DIRECTION('',(0.E0,0.E0,1.E0));
#438=DIRECTION('',(1.E0,0.E0,0.E0));
#439=AXIS2_PLACEMENT_3D('',#436,#437,#438);
#440=ITEM_DEFINED_TRANSFORMATION('','',#420,#439);
#441=(REPRESENTATION_RELATIONSHIP('','',#421,#433)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#440)SHAPE_REPRESENTATION_RELATIONSHIP());
#442=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#441,#435);
#443=DIRECTION('',(-1.E0,0.E0,0.E0));
#444=VECTOR('',#443,4.E-1);
#445=CARTESIAN_POINT('',(1.448E0,0.E0,6.5E-1));
#446=LINE('',#445,#444);
#447=DIRECTION('',(0.E0,0.E0,-1.E0));
#448=VECTOR('',#447,4.E-1);
#449=CARTESIAN_POINT('',(1.448E0,0.E0,1.05E0));
#450=LINE('',#449,#448);
#451=DIRECTION('',(1.E0,0.E0,0.E0));
#452=VECTOR('',#451,4.E-1);
#453=CARTESIAN_POINT('',(1.048E0,0.E0,1.05E0));
#454=LINE('',#453,#452);
#455=DIRECTION('',(0.E0,0.E0,1.E0));
#456=VECTOR('',#455,4.E-1);
#457=CARTESIAN_POINT('',(1.048E0,0.E0,6.5E-1));
#458=LINE('',#457,#456);
#459=DIRECTION('',(0.E0,-1.E0,0.E0));
#460=VECTOR('',#459,1.025E1);
#461=CARTESIAN_POINT('',(1.448E0,0.E0,6.5E-1));
#462=LINE('',#461,#460);
#463=DIRECTION('',(0.E0,-1.E0,0.E0));
#464=VECTOR('',#463,1.025E1);
#465=CARTESIAN_POINT('',(1.048E0,0.E0,6.5E-1));
#466=LINE('',#465,#464);
#467=DIRECTION('',(0.E0,-1.E0,0.E0));
#468=VECTOR('',#467,1.025E1);
#469=CARTESIAN_POINT('',(1.048E0,0.E0,1.05E0));
#470=LINE('',#469,#468);
#471=DIRECTION('',(0.E0,-1.E0,0.E0));
#472=VECTOR('',#471,1.025E1);
#473=CARTESIAN_POINT('',(1.448E0,0.E0,1.05E0));
#474=LINE('',#473,#472);
#475=DIRECTION('',(-1.E0,0.E0,0.E0));
#476=VECTOR('',#475,4.E-1);
#477=CARTESIAN_POINT('',(1.448E0,-1.025E1,6.5E-1));
#478=LINE('',#477,#476);
#479=DIRECTION('',(0.E0,0.E0,1.E0));
#480=VECTOR('',#479,4.E-1);
#481=CARTESIAN_POINT('',(1.048E0,-1.025E1,6.5E-1));
#482=LINE('',#481,#480);
#483=DIRECTION('',(1.E0,0.E0,0.E0));
#484=VECTOR('',#483,4.E-1);
#485=CARTESIAN_POINT('',(1.048E0,-1.025E1,1.05E0));
#486=LINE('',#485,#484);
#487=DIRECTION('',(0.E0,0.E0,-1.E0));
#488=VECTOR('',#487,4.E-1);
#489=CARTESIAN_POINT('',(1.448E0,-1.025E1,1.05E0));
#490=LINE('',#489,#488);
#491=CARTESIAN_POINT('',(1.448E0,0.E0,6.5E-1));
#492=CARTESIAN_POINT('',(1.048E0,0.E0,6.5E-1));
#493=VERTEX_POINT('',#491);
#494=VERTEX_POINT('',#492);
#495=CARTESIAN_POINT('',(1.048E0,0.E0,1.05E0));
#496=VERTEX_POINT('',#495);
#497=CARTESIAN_POINT('',(1.448E0,0.E0,1.05E0));
#498=VERTEX_POINT('',#497);
#499=CARTESIAN_POINT('',(1.448E0,-1.025E1,6.5E-1));
#500=CARTESIAN_POINT('',(1.048E0,-1.025E1,6.5E-1));
#501=VERTEX_POINT('',#499);
#502=VERTEX_POINT('',#500);
#503=CARTESIAN_POINT('',(1.048E0,-1.025E1,1.05E0));
#504=VERTEX_POINT('',#503);
#505=CARTESIAN_POINT('',(1.448E0,-1.025E1,1.05E0));
#506=VERTEX_POINT('',#505);
#507=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#508=DIRECTION('',(0.E0,1.E0,0.E0));
#509=DIRECTION('',(0.E0,0.E0,1.E0));
#510=AXIS2_PLACEMENT_3D('',#507,#508,#509);
#511=PLANE('',#510);
#513=ORIENTED_EDGE('',*,*,#512,.F.);
#515=ORIENTED_EDGE('',*,*,#514,.F.);
#517=ORIENTED_EDGE('',*,*,#516,.F.);
#519=ORIENTED_EDGE('',*,*,#518,.F.);
#520=EDGE_LOOP('',(#513,#515,#517,#519));
#521=FACE_OUTER_BOUND('',#520,.F.);
#523=CARTESIAN_POINT('',(1.448E0,0.E0,6.5E-1));
#524=DIRECTION('',(0.E0,0.E0,-1.E0));
#525=DIRECTION('',(-1.E0,0.E0,0.E0));
#526=AXIS2_PLACEMENT_3D('',#523,#524,#525);
#527=PLANE('',#526);
#528=ORIENTED_EDGE('',*,*,#512,.T.);
#530=ORIENTED_EDGE('',*,*,#529,.T.);
#532=ORIENTED_EDGE('',*,*,#531,.F.);
#534=ORIENTED_EDGE('',*,*,#533,.F.);
#535=EDGE_LOOP('',(#528,#530,#532,#534));
#536=FACE_OUTER_BOUND('',#535,.F.);
#538=CARTESIAN_POINT('',(1.048E0,0.E0,6.5E-1));
#539=DIRECTION('',(-1.E0,0.E0,0.E0));
#540=DIRECTION('',(0.E0,0.E0,1.E0));
#541=AXIS2_PLACEMENT_3D('',#538,#539,#540);
#542=PLANE('',#541);
#543=ORIENTED_EDGE('',*,*,#518,.T.);
#545=ORIENTED_EDGE('',*,*,#544,.T.);
#547=ORIENTED_EDGE('',*,*,#546,.F.);
#548=ORIENTED_EDGE('',*,*,#529,.F.);
#549=EDGE_LOOP('',(#543,#545,#547,#548));
#550=FACE_OUTER_BOUND('',#549,.F.);
#552=CARTESIAN_POINT('',(1.048E0,0.E0,1.05E0));
#553=DIRECTION('',(0.E0,0.E0,1.E0));
#554=DIRECTION('',(1.E0,0.E0,0.E0));
#555=AXIS2_PLACEMENT_3D('',#552,#553,#554);
#556=PLANE('',#555);
#557=ORIENTED_EDGE('',*,*,#516,.T.);
#559=ORIENTED_EDGE('',*,*,#558,.T.);
#561=ORIENTED_EDGE('',*,*,#560,.F.);
#562=ORIENTED_EDGE('',*,*,#544,.F.);
#563=EDGE_LOOP('',(#557,#559,#561,#562));
#564=FACE_OUTER_BOUND('',#563,.F.);
#566=CARTESIAN_POINT('',(1.448E0,0.E0,1.05E0));
#567=DIRECTION('',(1.E0,0.E0,0.E0));
#568=DIRECTION('',(0.E0,0.E0,-1.E0));
#569=AXIS2_PLACEMENT_3D('',#566,#567,#568);
#570=PLANE('',#569);
#571=ORIENTED_EDGE('',*,*,#514,.T.);
#572=ORIENTED_EDGE('',*,*,#533,.T.);
#574=ORIENTED_EDGE('',*,*,#573,.F.);
#575=ORIENTED_EDGE('',*,*,#558,.F.);
#576=EDGE_LOOP('',(#571,#572,#574,#575));
#577=FACE_OUTER_BOUND('',#576,.F.);
#579=CARTESIAN_POINT('',(0.E0,-1.025E1,0.E0));
#580=DIRECTION('',(0.E0,1.E0,0.E0));
#581=DIRECTION('',(0.E0,0.E0,1.E0));
#582=AXIS2_PLACEMENT_3D('',#579,#580,#581);
#583=PLANE('',#582);
#584=ORIENTED_EDGE('',*,*,#531,.T.);
#585=ORIENTED_EDGE('',*,*,#546,.T.);
#586=ORIENTED_EDGE('',*,*,#560,.T.);
#587=ORIENTED_EDGE('',*,*,#573,.T.);
#588=EDGE_LOOP('',(#584,#585,#586,#587));
#589=FACE_OUTER_BOUND('',#588,.F.);
#591=CLOSED_SHELL('',(#522,#537,#551,#565,#578,#590));
#592=MANIFOLD_SOLID_BREP('',#591);
#593=DIRECTION('',(0.E0,0.E0,1.E0));
#594=VECTOR('',#593,4.E-1);
#595=CARTESIAN_POINT('',(-1.448E0,0.E0,6.5E-1));
#596=LINE('',#595,#594);
#597=DIRECTION('',(-1.E0,0.E0,0.E0));
#598=VECTOR('',#597,4.E-1);
#599=CARTESIAN_POINT('',(-1.048E0,0.E0,6.5E-1));
#600=LINE('',#599,#598);
#601=DIRECTION('',(0.E0,0.E0,-1.E0));
#602=VECTOR('',#601,4.E-1);
#603=CARTESIAN_POINT('',(-1.048E0,0.E0,1.05E0));
#604=LINE('',#603,#602);
#605=DIRECTION('',(1.E0,0.E0,0.E0));
#606=VECTOR('',#605,4.E-1);
#607=CARTESIAN_POINT('',(-1.448E0,0.E0,1.05E0));
#608=LINE('',#607,#606);
#609=DIRECTION('',(0.E0,-1.E0,0.E0));
#610=VECTOR('',#609,1.025E1);
#611=CARTESIAN_POINT('',(-1.448E0,0.E0,6.5E-1));
#612=LINE('',#611,#610);
#613=DIRECTION('',(0.E0,-1.E0,0.E0));
#614=VECTOR('',#613,1.025E1);
#615=CARTESIAN_POINT('',(-1.448E0,0.E0,1.05E0));
#616=LINE('',#615,#614);
#617=DIRECTION('',(0.E0,-1.E0,0.E0));
#618=VECTOR('',#617,1.025E1);
#619=CARTESIAN_POINT('',(-1.048E0,0.E0,1.05E0));
#620=LINE('',#619,#618);
#621=DIRECTION('',(0.E0,-1.E0,0.E0));
#622=VECTOR('',#621,1.025E1);
#623=CARTESIAN_POINT('',(-1.048E0,0.E0,6.5E-1));
#624=LINE('',#623,#622);
#625=DIRECTION('',(0.E0,0.E0,1.E0));
#626=VECTOR('',#625,4.E-1);
#627=CARTESIAN_POINT('',(-1.448E0,-1.025E1,6.5E-1));
#628=LINE('',#627,#626);
#629=DIRECTION('',(1.E0,0.E0,0.E0));
#630=VECTOR('',#629,4.E-1);
#631=CARTESIAN_POINT('',(-1.448E0,-1.025E1,1.05E0));
#632=LINE('',#631,#630);
#633=DIRECTION('',(0.E0,0.E0,-1.E0));
#634=VECTOR('',#633,4.E-1);
#635=CARTESIAN_POINT('',(-1.048E0,-1.025E1,1.05E0));
#636=LINE('',#635,#634);
#637=DIRECTION('',(-1.E0,0.E0,0.E0));
#638=VECTOR('',#637,4.E-1);
#639=CARTESIAN_POINT('',(-1.048E0,-1.025E1,6.5E-1));
#640=LINE('',#639,#638);
#641=CARTESIAN_POINT('',(-1.448E0,0.E0,6.5E-1));
#642=CARTESIAN_POINT('',(-1.448E0,0.E0,1.05E0));
#643=VERTEX_POINT('',#641);
#644=VERTEX_POINT('',#642);
#645=CARTESIAN_POINT('',(-1.048E0,0.E0,1.05E0));
#646=VERTEX_POINT('',#645);
#647=CARTESIAN_POINT('',(-1.048E0,0.E0,6.5E-1));
#648=VERTEX_POINT('',#647);
#649=CARTESIAN_POINT('',(-1.448E0,-1.025E1,6.5E-1));
#650=CARTESIAN_POINT('',(-1.448E0,-1.025E1,1.05E0));
#651=VERTEX_POINT('',#649);
#652=VERTEX_POINT('',#650);
#653=CARTESIAN_POINT('',(-1.048E0,-1.025E1,1.05E0));
#654=VERTEX_POINT('',#653);
#655=CARTESIAN_POINT('',(-1.048E0,-1.025E1,6.5E-1));
#656=VERTEX_POINT('',#655);
#657=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#658=DIRECTION('',(0.E0,1.E0,0.E0));
#659=DIRECTION('',(0.E0,0.E0,1.E0));
#660=AXIS2_PLACEMENT_3D('',#657,#658,#659);
#661=PLANE('',#660);
#663=ORIENTED_EDGE('',*,*,#662,.F.);
#665=ORIENTED_EDGE('',*,*,#664,.F.);
#667=ORIENTED_EDGE('',*,*,#666,.F.);
#669=ORIENTED_EDGE('',*,*,#668,.F.);
#670=EDGE_LOOP('',(#663,#665,#667,#669));
#671=FACE_OUTER_BOUND('',#670,.F.);
#673=CARTESIAN_POINT('',(-1.448E0,0.E0,6.5E-1));
#674=DIRECTION('',(-1.E0,0.E0,0.E0));
#675=DIRECTION('',(0.E0,0.E0,1.E0));
#676=AXIS2_PLACEMENT_3D('',#673,#674,#675);
#677=PLANE('',#676);
#678=ORIENTED_EDGE('',*,*,#662,.T.);
#680=ORIENTED_EDGE('',*,*,#679,.T.);
#682=ORIENTED_EDGE('',*,*,#681,.F.);
#684=ORIENTED_EDGE('',*,*,#683,.F.);
#685=EDGE_LOOP('',(#678,#680,#682,#684));
#686=FACE_OUTER_BOUND('',#685,.F.);
#688=CARTESIAN_POINT('',(-1.448E0,0.E0,1.05E0));
#689=DIRECTION('',(0.E0,0.E0,1.E0));
#690=DIRECTION('',(1.E0,0.E0,0.E0));
#691=AXIS2_PLACEMENT_3D('',#688,#689,#690);
#692=PLANE('',#691);
#693=ORIENTED_EDGE('',*,*,#668,.T.);
#695=ORIENTED_EDGE('',*,*,#694,.T.);
#697=ORIENTED_EDGE('',*,*,#696,.F.);
#698=ORIENTED_EDGE('',*,*,#679,.F.);
#699=EDGE_LOOP('',(#693,#695,#697,#698));
#700=FACE_OUTER_BOUND('',#699,.F.);
#702=CARTESIAN_POINT('',(-1.048E0,0.E0,1.05E0));
#703=DIRECTION('',(1.E0,0.E0,0.E0));
#704=DIRECTION('',(0.E0,0.E0,-1.E0));
#705=AXIS2_PLACEMENT_3D('',#702,#703,#704);
#706=PLANE('',#705);
#707=ORIENTED_EDGE('',*,*,#666,.T.);
#709=ORIENTED_EDGE('',*,*,#708,.T.);
#711=ORIENTED_EDGE('',*,*,#710,.F.);
#712=ORIENTED_EDGE('',*,*,#694,.F.);
#713=EDGE_LOOP('',(#707,#709,#711,#712));
#714=FACE_OUTER_BOUND('',#713,.F.);
#716=CARTESIAN_POINT('',(-1.048E0,0.E0,6.5E-1));
#717=DIRECTION('',(0.E0,0.E0,-1.E0));
#718=DIRECTION('',(-1.E0,0.E0,0.E0));
#719=AXIS2_PLACEMENT_3D('',#716,#717,#718);
#720=PLANE('',#719);
#721=ORIENTED_EDGE('',*,*,#664,.T.);
#722=ORIENTED_EDGE('',*,*,#683,.T.);
#724=ORIENTED_EDGE('',*,*,#723,.F.);
#725=ORIENTED_EDGE('',*,*,#708,.F.);
#726=EDGE_LOOP('',(#721,#722,#724,#725));
#727=FACE_OUTER_BOUND('',#726,.F.);
#729=CARTESIAN_POINT('',(0.E0,-1.025E1,0.E0));
#730=DIRECTION('',(0.E0,1.E0,0.E0));
#731=DIRECTION('',(0.E0,0.E0,1.E0));
#732=AXIS2_PLACEMENT_3D('',#729,#730,#731);
#733=PLANE('',#732);
#734=ORIENTED_EDGE('',*,*,#681,.T.);
#735=ORIENTED_EDGE('',*,*,#696,.T.);
#736=ORIENTED_EDGE('',*,*,#710,.T.);
#737=ORIENTED_EDGE('',*,*,#723,.T.);
#738=EDGE_LOOP('',(#734,#735,#736,#737));
#739=FACE_OUTER_BOUND('',#738,.F.);
#741=CLOSED_SHELL('',(#672,#687,#701,#715,#728,#740));
#742=MANIFOLD_SOLID_BREP('',#741);
#743=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#744=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#745=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#746=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#745);
#747=(CONVERSION_BASED_UNIT('DEGREE',#746)NAMED_UNIT(#744)PLANE_ANGLE_UNIT());
#748=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#749=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.065834074500E-3),#743,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#751=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#752=DIRECTION('',(0.E0,0.E0,1.E0));
#753=DIRECTION('',(1.E0,0.E0,0.E0));
#756=MECHANICAL_CONTEXT('',#422,'mechanical');
#757=PRODUCT('928-1','928-1','NOT SPECIFIED',(#756));
#758=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION',#757,
.MADE.);
#764=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#765=DIRECTION('',(0.E0,0.E0,1.E0));
#766=DIRECTION('',(1.E0,0.E0,0.E0));
#767=AXIS2_PLACEMENT_3D('',#764,#765,#766);
#768=ITEM_DEFINED_TRANSFORMATION('','',#754,#767);
#769=(REPRESENTATION_RELATIONSHIP('','',#755,#433)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#768)SHAPE_REPRESENTATION_RELATIONSHIP());
#770=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#769,#763);
#771=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#772=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#773=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#774=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#773);
#775=(CONVERSION_BASED_UNIT('DEGREE',#774)NAMED_UNIT(#772)PLANE_ANGLE_UNIT());
#776=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#777=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.354244539562E-3),#771,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#779=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#780=DIRECTION('',(0.E0,0.E0,1.E0));
#781=DIRECTION('',(1.E0,0.E0,0.E0));
#783=DESIGN_CONTEXT('',#422,'design');
#784=MECHANICAL_CONTEXT('',#422,'mechanical');
#785=PRODUCT('IR928-6C_ASM','IR928-6C_ASM','NOT SPECIFIED',(#784));
#786=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#785,
.MADE.);
#788=PRODUCT_CATEGORY('part','');
#789=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#785));
#790=PRODUCT_CATEGORY_RELATIONSHIP('','',#788,#789);
#791=PRODUCT_CATEGORY('part','');
#792=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#426,#757));
#793=PRODUCT_CATEGORY_RELATIONSHIP('','',#791,#792);
#794=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#795=SECURITY_CLASSIFICATION('','',#794);
#796=CC_DESIGN_SECURITY_CLASSIFICATION(#795,(#427,#758,#786,#434,#762));
#797=APPROVAL_STATUS('approved');
#798=APPROVAL(#797,'');
#799=CC_DESIGN_APPROVAL(#798,(#795,#427,#758,#786,#428,#759,#787));
#800=CALENDAR_DATE(113,25,11);
#801=COORDINATED_UNIVERSAL_TIME_OFFSET(8,0,.AHEAD.);
#802=LOCAL_TIME(17,49,2.E0,#801);
#803=DATE_AND_TIME(#800,#802);
#804=APPROVAL_DATE_TIME(#803,#798);
#805=DATE_TIME_ROLE('creation_date');
#806=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#803,#805,(#428,#759,#787));
#807=DATE_TIME_ROLE('classification_date');
#808=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#803,#807,(#795));
#809=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#810=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#811=PERSON_AND_ORGANIZATION(#809,#810);
#812=APPROVAL_ROLE('approver');
#813=APPROVAL_PERSON_ORGANIZATION(#811,#798,#812);
#814=PERSON_AND_ORGANIZATION_ROLE('creator');
#815=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#811,#814,(#427,#758,#786,
#428,#759,#787));
#816=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#817=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#811,#816,(#427,#758,#786));
#818=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#819=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#811,#818,(#795));
#820=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#821=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#811,#820,(#785,#426,#757));
#5=CIRCLE('',#4,7.5E-1);
#10=CIRCLE('',#9,7.5E-1);
#188=EDGE_CURVE('',#173,#174,#14,.T.);
#190=EDGE_CURVE('',#173,#145,#18,.T.);
#192=EDGE_CURVE('',#145,#146,#22,.T.);
#194=EDGE_CURVE('',#146,#141,#26,.T.);
#196=EDGE_CURVE('',#141,#142,#30,.T.);
#198=EDGE_CURVE('',#142,#177,#34,.T.);
#200=EDGE_CURVE('',#177,#178,#38,.T.);
#202=EDGE_CURVE('',#178,#174,#42,.T.);
#206=EDGE_CURVE('',#165,#166,#5,.T.);
#208=EDGE_CURVE('',#165,#166,#10,.T.);
#212=ADVANCED_FACE('',(#205,#211),#187,.F.);
#222=ADVANCED_FACE('',(#221),#217,.T.);
#229=EDGE_CURVE('',#174,#170,#46,.T.);
#231=EDGE_CURVE('',#170,#181,#70,.T.);
#233=EDGE_CURVE('',#173,#181,#66,.T.);
#237=ADVANCED_FACE('',(#236),#227,.F.);
#244=EDGE_CURVE('',#178,#169,#50,.T.);
#246=EDGE_CURVE('',#169,#170,#74,.T.);
#251=ADVANCED_FACE('',(#250),#242,.F.);
#258=EDGE_CURVE('',#177,#182,#58,.T.);
#260=EDGE_CURVE('',#182,#169,#78,.T.);
#265=ADVANCED_FACE('',(#264),#256,.F.);
#271=EDGE_CURVE('',#181,#182,#54,.T.);
#275=EDGE_CURVE('',#142,#158,#62,.T.);
#277=EDGE_CURVE('',#158,#160,#110,.T.);
#279=EDGE_CURVE('',#145,#160,#106,.T.);
#285=ADVANCED_FACE('',(#284),#270,.T.);
#297=ADVANCED_FACE('',(#296),#290,.T.);
#303=EDGE_CURVE('',#141,#157,#82,.T.);
#305=EDGE_CURVE('',#157,#158,#122,.T.);
#311=ADVANCED_FACE('',(#310),#302,.T.);
#317=EDGE_CURVE('',#162,#157,#90,.T.);
#321=EDGE_CURVE('',#146,#162,#86,.T.);
#325=ADVANCED_FACE('',(#324),#316,.T.);
#332=EDGE_CURVE('',#162,#154,#94,.T.);
#334=EDGE_CURVE('',#154,#149,#130,.T.);
#336=EDGE_CURVE('',#157,#149,#118,.T.);
#340=ADVANCED_FACE('',(#339),#330,.T.);
#347=EDGE_CURVE('',#160,#162,#98,.T.);
#349=EDGE_CURVE('',#160,#152,#102,.T.);
#351=EDGE_CURVE('',#152,#154,#134,.T.);
#355=ADVANCED_FACE('',(#354),#345,.T.);
#367=ADVANCED_FACE('',(#366),#360,.T.);
#375=EDGE_CURVE('',#158,#150,#114,.T.);
#377=EDGE_CURVE('',#150,#152,#138,.T.);
#381=ADVANCED_FACE('',(#380),#372,.T.);
#388=EDGE_CURVE('',#149,#150,#126,.T.);
#394=ADVANCED_FACE('',(#393),#386,.T.);
#406=ADVANCED_FACE('',(#405),#399,.T.);
#416=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#415))GLOBAL_UNIT_ASSIGNED_CONTEXT((#409,#413,#414))REPRESENTATION_CONTEXT
('ID1','3'));
#420=AXIS2_PLACEMENT_3D('',#417,#418,#419);
#421=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#420,#408),#416);
#428=PRODUCT_DEFINITION('design','',#427,#424);
#429=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 928-6C-2.',#428);
#430=SHAPE_DEFINITION_REPRESENTATION(#429,#421);
#431=SHAPE_DEFINITION_REPRESENTATION(#432,#433);
#432=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR IR928-6C_ASM.',#787);
#433=SHAPE_REPRESENTATION('',(#439,#767,#782),#778);
#434=NEXT_ASSEMBLY_USAGE_OCCURRENCE('0','Next assembly relationship','928-6C-2',
#787,#428,$);
#435=PRODUCT_DEFINITION_SHAPE('Placement #0',
'Placement of 928-6C-2 with respect to IR928-6C_ASM',#434);
#512=EDGE_CURVE('',#493,#494,#446,.T.);
#514=EDGE_CURVE('',#498,#493,#450,.T.);
#516=EDGE_CURVE('',#496,#498,#454,.T.);
#518=EDGE_CURVE('',#494,#496,#458,.T.);
#522=ADVANCED_FACE('',(#521),#511,.T.);
#529=EDGE_CURVE('',#494,#502,#466,.T.);
#531=EDGE_CURVE('',#501,#502,#478,.T.);
#533=EDGE_CURVE('',#493,#501,#462,.T.);
#537=ADVANCED_FACE('',(#536),#527,.T.);
#544=EDGE_CURVE('',#496,#504,#470,.T.);
#546=EDGE_CURVE('',#502,#504,#482,.T.);
#551=ADVANCED_FACE('',(#550),#542,.T.);
#558=EDGE_CURVE('',#498,#506,#474,.T.);
#560=EDGE_CURVE('',#504,#506,#486,.T.);
#565=ADVANCED_FACE('',(#564),#556,.T.);
#573=EDGE_CURVE('',#506,#501,#490,.T.);
#578=ADVANCED_FACE('',(#577),#570,.T.);
#590=ADVANCED_FACE('',(#589),#583,.F.);
#662=EDGE_CURVE('',#643,#644,#596,.T.);
#664=EDGE_CURVE('',#648,#643,#600,.T.);
#666=EDGE_CURVE('',#646,#648,#604,.T.);
#668=EDGE_CURVE('',#644,#646,#608,.T.);
#672=ADVANCED_FACE('',(#671),#661,.T.);
#679=EDGE_CURVE('',#644,#652,#616,.T.);
#681=EDGE_CURVE('',#651,#652,#628,.T.);
#683=EDGE_CURVE('',#643,#651,#612,.T.);
#687=ADVANCED_FACE('',(#686),#677,.T.);
#694=EDGE_CURVE('',#646,#654,#620,.T.);
#696=EDGE_CURVE('',#652,#654,#632,.T.);
#701=ADVANCED_FACE('',(#700),#692,.T.);
#708=EDGE_CURVE('',#648,#656,#624,.T.);
#710=EDGE_CURVE('',#654,#656,#636,.T.);
#715=ADVANCED_FACE('',(#714),#706,.T.);
#723=EDGE_CURVE('',#656,#651,#640,.T.);
#728=ADVANCED_FACE('',(#727),#720,.T.);
#740=ADVANCED_FACE('',(#739),#733,.F.);
#750=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#749))GLOBAL_UNIT_ASSIGNED_CONTEXT((#743,#747,#748))REPRESENTATION_CONTEXT
('ID2','3'));
#754=AXIS2_PLACEMENT_3D('',#751,#752,#753);
#755=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#754,#592,#742),#750);
#759=PRODUCT_DEFINITION('design','',#758,#424);
#760=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 928-1.',#759);
#761=SHAPE_DEFINITION_REPRESENTATION(#760,#755);
#762=NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','Next assembly relationship','928-1',
#787,#759,$);
#763=PRODUCT_DEFINITION_SHAPE('Placement #1',
'Placement of 928-1 with respect to IR928-6C_ASM',#762);
#778=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#777))GLOBAL_UNIT_ASSIGNED_CONTEXT((#771,#775,#776))REPRESENTATION_CONTEXT
('ID3','3'));
#782=AXIS2_PLACEMENT_3D('',#779,#780,#781);
#787=PRODUCT_DEFINITION('design','',#786,#783);
ENDSEC;
END-ISO-10303-21;