ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('67-23B_ASM','2013-10-24T',('kenchen'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009360',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009360','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=DIRECTION('',(0.E0,0.E0,1.E0));
#2=VECTOR('',#1,2.7E0);
#3=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.35E0));
#4=LINE('',#3,#2);
#5=DIRECTION('',(1.E0,0.E0,0.E0));
#6=VECTOR('',#5,3.2E0);
#7=CARTESIAN_POINT('',(-1.6E0,0.E0,1.35E0));
#8=LINE('',#7,#6);
#9=DIRECTION('',(0.E0,0.E0,-1.E0));
#10=VECTOR('',#9,2.7E0);
#11=CARTESIAN_POINT('',(1.6E0,0.E0,1.35E0));
#12=LINE('',#11,#10);
#13=DIRECTION('',(-1.E0,0.E0,0.E0));
#14=VECTOR('',#13,3.2E0);
#15=CARTESIAN_POINT('',(1.6E0,0.E0,-1.35E0));
#16=LINE('',#15,#14);
#17=DIRECTION('',(-1.E0,0.E0,0.E0));
#18=VECTOR('',#17,3.16E0);
#19=CARTESIAN_POINT('',(1.58E0,0.E0,1.33E0));
#20=LINE('',#19,#18);
#21=DIRECTION('',(0.E0,0.E0,-1.E0));
#22=VECTOR('',#21,2.66E0);
#23=CARTESIAN_POINT('',(-1.58E0,0.E0,1.33E0));
#24=LINE('',#23,#22);
#25=DIRECTION('',(1.E0,0.E0,0.E0));
#26=VECTOR('',#25,3.16E0);
#27=CARTESIAN_POINT('',(-1.58E0,0.E0,-1.33E0));
#28=LINE('',#27,#26);
#29=DIRECTION('',(0.E0,0.E0,1.E0));
#30=VECTOR('',#29,2.66E0);
#31=CARTESIAN_POINT('',(1.58E0,0.E0,-1.33E0));
#32=LINE('',#31,#30);
#33=DIRECTION('',(0.E0,0.E0,1.E0));
#34=VECTOR('',#33,8.E-1);
#35=CARTESIAN_POINT('',(-1.6E0,5.E-1,-1.35E0));
#36=LINE('',#35,#34);
#37=DIRECTION('',(0.E0,-1.E0,0.E0));
#38=VECTOR('',#37,4.E-1);
#39=CARTESIAN_POINT('',(-1.6E0,9.E-1,-5.5E-1));
#40=LINE('',#39,#38);
#41=DIRECTION('',(0.E0,1.E0,0.E0));
#42=VECTOR('',#41,5.E-1);
#43=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.35E0));
#44=LINE('',#43,#42);
#45=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
#46=VECTOR('',#45,1.131370849898E0);
#47=CARTESIAN_POINT('',(-1.6E0,5.E-1,-5.5E-1));
#48=LINE('',#47,#46);
#49=DIRECTION('',(1.E0,0.E0,0.E0));
#50=VECTOR('',#49,8.E-1);
#51=CARTESIAN_POINT('',(-1.6E0,5.E-1,-1.35E0));
#52=LINE('',#51,#50);
#53=DIRECTION('',(0.E0,1.E0,0.E0));
#54=VECTOR('',#53,9.E-1);
#55=CARTESIAN_POINT('',(1.6E0,0.E0,-1.35E0));
#56=LINE('',#55,#54);
#57=DIRECTION('',(0.E0,-1.E0,0.E0));
#58=VECTOR('',#57,4.E-1);
#59=CARTESIAN_POINT('',(-8.E-1,9.E-1,-1.35E0));
#60=LINE('',#59,#58);
#61=DIRECTION('',(0.E0,1.E0,0.E0));
#62=VECTOR('',#61,9.E-1);
#63=CARTESIAN_POINT('',(1.6E0,0.E0,1.35E0));
#64=LINE('',#63,#62);
#65=DIRECTION('',(0.E0,1.E0,0.E0));
#66=VECTOR('',#65,9.E-1);
#67=CARTESIAN_POINT('',(-1.6E0,0.E0,1.35E0));
#68=LINE('',#67,#66);
#69=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
#70=VECTOR('',#69,1.131370849898E0);
#71=CARTESIAN_POINT('',(-1.6E0,9.E-1,-5.5E-1));
#72=LINE('',#71,#70);
#73=DIRECTION('',(-1.E0,0.E0,0.E0));
#74=VECTOR('',#73,2.4E0);
#75=CARTESIAN_POINT('',(1.6E0,9.E-1,-1.35E0));
#76=LINE('',#75,#74);
#77=DIRECTION('',(0.E0,0.E0,-1.E0));
#78=VECTOR('',#77,2.7E0);
#79=CARTESIAN_POINT('',(1.6E0,9.E-1,1.35E0));
#80=LINE('',#79,#78);
#81=DIRECTION('',(1.E0,0.E0,0.E0));
#82=VECTOR('',#81,3.2E0);
#83=CARTESIAN_POINT('',(-1.6E0,9.E-1,1.35E0));
#84=LINE('',#83,#82);
#85=DIRECTION('',(0.E0,0.E0,1.E0));
#86=VECTOR('',#85,1.9E0);
#87=CARTESIAN_POINT('',(-1.6E0,9.E-1,-5.5E-1));
#88=LINE('',#87,#86);
#89=DIRECTION('',(-1.E0,0.E0,0.E0));
#90=VECTOR('',#89,6.745943739732E-1);
#91=CARTESIAN_POINT('',(1.474594373973E0,-7.5E-1,1.224594373973E0));
#92=LINE('',#91,#90);
#93=DIRECTION('',(0.E0,9.902680687416E-1,1.391731009601E-1));
#94=VECTOR('',#93,1.514741358778E-1);
#95=CARTESIAN_POINT('',(8.E-1,-9.E-1,1.203513248768E0));
#96=LINE('',#95,#94);
#97=DIRECTION('',(0.E0,9.902680687416E-1,1.391731009601E-1));
#98=VECTOR('',#97,1.514741358778E-1);
#99=CARTESIAN_POINT('',(-8.E-1,-9.E-1,1.203513248768E0));
#100=LINE('',#99,#98);
#101=DIRECTION('',(1.E0,0.E0,0.E0));
#102=VECTOR('',#101,6.745943739732E-1);
#103=CARTESIAN_POINT('',(-1.474594373973E0,-7.5E-1,1.224594373973E0));
#104=LINE('',#103,#102);
#105=DIRECTION('',(-1.378445374916E-1,-9.808148484640E-1,-1.378445374916E-1));
#106=VECTOR('',#105,7.646703158853E-1);
#107=CARTESIAN_POINT('',(1.58E0,0.E0,1.33E0));
#108=LINE('',#107,#106);
#109=DIRECTION('',(0.E0,0.E0,1.E0));
#110=VECTOR('',#109,2.449188747946E0);
#111=CARTESIAN_POINT('',(1.474594373973E0,-7.5E-1,-1.224594373973E0));
#112=LINE('',#111,#110);
#113=DIRECTION('',(-1.378445374916E-1,-9.808148484640E-1,1.378445374916E-1));
#114=VECTOR('',#113,7.646703158853E-1);
#115=CARTESIAN_POINT('',(1.58E0,0.E0,-1.33E0));
#116=LINE('',#115,#114);
#117=DIRECTION('',(-1.E0,0.E0,0.E0));
#118=VECTOR('',#117,6.745943739732E-1);
#119=CARTESIAN_POINT('',(1.474594373973E0,-7.5E-1,-1.224594373973E0));
#120=LINE('',#119,#118);
#121=DIRECTION('',(1.378445374916E-1,-9.808148484640E-1,1.378445374916E-1));
#122=VECTOR('',#121,7.646703158853E-1);
#123=CARTESIAN_POINT('',(-1.58E0,0.E0,-1.33E0));
#124=LINE('',#123,#122);
#125=DIRECTION('',(1.E0,0.E0,0.E0));
#126=VECTOR('',#125,6.745943739732E-1);
#127=CARTESIAN_POINT('',(-1.474594373973E0,-7.5E-1,-1.224594373973E0));
#128=LINE('',#127,#126);
#129=DIRECTION('',(0.E0,9.902680687416E-1,-1.391731009601E-1));
#130=VECTOR('',#129,1.514741358778E-1);
#131=CARTESIAN_POINT('',(-8.E-1,-9.E-1,-1.203513248768E0));
#132=LINE('',#131,#130);
#133=DIRECTION('',(0.E0,9.902680687416E-1,-1.391731009601E-1));
#134=VECTOR('',#133,1.514741358778E-1);
#135=CARTESIAN_POINT('',(8.E-1,-9.E-1,-1.203513248768E0));
#136=LINE('',#135,#134);
#137=DIRECTION('',(0.E0,0.E0,-1.E0));
#138=VECTOR('',#137,2.449188747946E0);
#139=CARTESIAN_POINT('',(-1.474594373973E0,-7.5E-1,1.224594373973E0));
#140=LINE('',#139,#138);
#141=DIRECTION('',(1.378445374916E-1,-9.808148484640E-1,-1.378445374916E-1));
#142=VECTOR('',#141,7.646703158853E-1);
#143=CARTESIAN_POINT('',(-1.58E0,0.E0,1.33E0));
#144=LINE('',#143,#142);
#145=DIRECTION('',(0.E0,0.E0,1.E0));
#146=VECTOR('',#145,2.449188747946E0);
#147=CARTESIAN_POINT('',(-8.E-1,-7.5E-1,-1.224594373973E0));
#148=LINE('',#147,#146);
#149=DIRECTION('',(0.E0,0.E0,1.E0));
#150=VECTOR('',#149,2.407026497536E0);
#151=CARTESIAN_POINT('',(8.E-1,-9.E-1,-1.203513248768E0));
#152=LINE('',#151,#150);
#153=DIRECTION('',(1.E0,0.E0,0.E0));
#154=VECTOR('',#153,1.6E0);
#155=CARTESIAN_POINT('',(-8.E-1,-9.E-1,-1.203513248768E0));
#156=LINE('',#155,#154);
#157=DIRECTION('',(0.E0,0.E0,1.E0));
#158=VECTOR('',#157,2.407026497536E0);
#159=CARTESIAN_POINT('',(-8.E-1,-9.E-1,-1.203513248768E0));
#160=LINE('',#159,#158);
#161=DIRECTION('',(-1.E0,0.E0,0.E0));
#162=VECTOR('',#161,1.6E0);
#163=CARTESIAN_POINT('',(8.E-1,-9.E-1,1.203513248768E0));
#164=LINE('',#163,#162);
#165=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#166=DIRECTION('',(0.E0,-1.E0,0.E0));
#167=DIRECTION('',(1.E0,0.E0,0.E0));
#168=AXIS2_PLACEMENT_3D('',#165,#166,#167);
#170=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#171=DIRECTION('',(0.E0,-1.E0,0.E0));
#172=DIRECTION('',(-1.E0,0.E0,0.E0));
#173=AXIS2_PLACEMENT_3D('',#170,#171,#172);
#175=DIRECTION('',(0.E0,0.E0,1.E0));
#176=VECTOR('',#175,2.449188747946E0);
#177=CARTESIAN_POINT('',(8.E-1,-7.5E-1,-1.224594373973E0));
#178=LINE('',#177,#176);
#179=DIRECTION('',(0.E0,1.E0,0.E0));
#180=VECTOR('',#179,1.5E-1);
#181=CARTESIAN_POINT('',(5.E-1,-9.E-1,0.E0));
#182=LINE('',#181,#180);
#183=DIRECTION('',(0.E0,1.E0,0.E0));
#184=VECTOR('',#183,1.5E-1);
#185=CARTESIAN_POINT('',(-5.E-1,-9.E-1,0.E0));
#186=LINE('',#185,#184);
#187=CARTESIAN_POINT('',(0.E0,-7.5E-1,0.E0));
#188=DIRECTION('',(0.E0,-1.E0,0.E0));
#189=DIRECTION('',(1.E0,0.E0,0.E0));
#190=AXIS2_PLACEMENT_3D('',#187,#188,#189);
#192=CARTESIAN_POINT('',(0.E0,-7.5E-1,0.E0));
#193=DIRECTION('',(0.E0,-1.E0,0.E0));
#194=DIRECTION('',(-1.E0,0.E0,0.E0));
#195=AXIS2_PLACEMENT_3D('',#192,#193,#194);
#197=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.35E0));
#198=CARTESIAN_POINT('',(-1.6E0,0.E0,1.35E0));
#199=VERTEX_POINT('',#197);
#200=VERTEX_POINT('',#198);
#201=CARTESIAN_POINT('',(1.6E0,0.E0,1.35E0));
#202=VERTEX_POINT('',#201);
#203=CARTESIAN_POINT('',(1.6E0,0.E0,-1.35E0));
#204=VERTEX_POINT('',#203);
#205=CARTESIAN_POINT('',(-1.6E0,9.E-1,1.35E0));
#206=CARTESIAN_POINT('',(1.6E0,9.E-1,1.35E0));
#207=VERTEX_POINT('',#205);
#208=VERTEX_POINT('',#206);
#209=CARTESIAN_POINT('',(1.6E0,9.E-1,-1.35E0));
#210=VERTEX_POINT('',#209);
#211=CARTESIAN_POINT('',(-1.6E0,9.E-1,-5.5E-1));
#212=CARTESIAN_POINT('',(-8.E-1,9.E-1,-1.35E0));
#213=VERTEX_POINT('',#211);
#214=VERTEX_POINT('',#212);
#215=CARTESIAN_POINT('',(-1.6E0,5.E-1,-1.35E0));
#216=CARTESIAN_POINT('',(-1.6E0,5.E-1,-5.5E-1));
#217=VERTEX_POINT('',#215);
#218=VERTEX_POINT('',#216);
#219=CARTESIAN_POINT('',(-8.E-1,5.E-1,-1.35E0));
#220=VERTEX_POINT('',#219);
#221=CARTESIAN_POINT('',(1.58E0,0.E0,1.33E0));
#222=CARTESIAN_POINT('',(-1.58E0,0.E0,1.33E0));
#223=VERTEX_POINT('',#221);
#224=VERTEX_POINT('',#222);
#225=CARTESIAN_POINT('',(-1.58E0,0.E0,-1.33E0));
#226=VERTEX_POINT('',#225);
#227=CARTESIAN_POINT('',(1.58E0,0.E0,-1.33E0));
#228=VERTEX_POINT('',#227);
#229=CARTESIAN_POINT('',(8.E-1,-9.E-1,-1.203513248768E0));
#230=CARTESIAN_POINT('',(8.E-1,-9.E-1,1.203513248768E0));
#231=VERTEX_POINT('',#229);
#232=VERTEX_POINT('',#230);
#233=CARTESIAN_POINT('',(-8.E-1,-9.E-1,-1.203513248768E0));
#234=CARTESIAN_POINT('',(-8.E-1,-9.E-1,1.203513248768E0));
#235=VERTEX_POINT('',#233);
#236=VERTEX_POINT('',#234);
#237=CARTESIAN_POINT('',(1.474594373973E0,-7.5E-1,1.224594373973E0));
#238=CARTESIAN_POINT('',(8.E-1,-7.5E-1,1.224594373973E0));
#239=VERTEX_POINT('',#237);
#240=VERTEX_POINT('',#238);
#241=CARTESIAN_POINT('',(-8.E-1,-7.5E-1,1.224594373973E0));
#242=VERTEX_POINT('',#241);
#243=CARTESIAN_POINT('',(-1.474594373973E0,-7.5E-1,1.224594373973E0));
#244=VERTEX_POINT('',#243);
#245=CARTESIAN_POINT('',(-1.474594373973E0,-7.5E-1,-1.224594373973E0));
#246=VERTEX_POINT('',#245);
#247=CARTESIAN_POINT('',(1.474594373973E0,-7.5E-1,-1.224594373973E0));
#248=CARTESIAN_POINT('',(8.E-1,-7.5E-1,-1.224594373973E0));
#249=VERTEX_POINT('',#247);
#250=VERTEX_POINT('',#248);
#251=CARTESIAN_POINT('',(-8.E-1,-7.5E-1,-1.224594373973E0));
#252=VERTEX_POINT('',#251);
#253=CARTESIAN_POINT('',(5.E-1,-7.5E-1,0.E0));
#254=CARTESIAN_POINT('',(-5.E-1,-7.5E-1,0.E0));
#255=VERTEX_POINT('',#253);
#256=VERTEX_POINT('',#254);
#257=CARTESIAN_POINT('',(5.E-1,-9.E-1,0.E0));
#258=CARTESIAN_POINT('',(-5.E-1,-9.E-1,0.E0));
#259=VERTEX_POINT('',#257);
#260=VERTEX_POINT('',#258);
#261=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#262=DIRECTION('',(0.E0,1.E0,0.E0));
#263=DIRECTION('',(1.E0,0.E0,0.E0));
#264=AXIS2_PLACEMENT_3D('',#261,#262,#263);
#265=PLANE('',#264);
#267=ORIENTED_EDGE('',*,*,#266,.T.);
#269=ORIENTED_EDGE('',*,*,#268,.T.);
#271=ORIENTED_EDGE('',*,*,#270,.T.);
#273=ORIENTED_EDGE('',*,*,#272,.T.);
#274=EDGE_LOOP('',(#267,#269,#271,#273));
#275=FACE_OUTER_BOUND('',#274,.F.);
#277=ORIENTED_EDGE('',*,*,#276,.T.);
#279=ORIENTED_EDGE('',*,*,#278,.T.);
#281=ORIENTED_EDGE('',*,*,#280,.T.);
#283=ORIENTED_EDGE('',*,*,#282,.T.);
#284=EDGE_LOOP('',(#277,#279,#281,#283));
#285=FACE_BOUND('',#284,.F.);
#287=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.35E0));
#288=DIRECTION('',(-1.E0,0.E0,0.E0));
#289=DIRECTION('',(0.E0,0.E0,1.E0));
#290=AXIS2_PLACEMENT_3D('',#287,#288,#289);
#291=PLANE('',#290);
#293=ORIENTED_EDGE('',*,*,#292,.T.);
#295=ORIENTED_EDGE('',*,*,#294,.F.);
#297=ORIENTED_EDGE('',*,*,#296,.T.);
#299=ORIENTED_EDGE('',*,*,#298,.F.);
#300=ORIENTED_EDGE('',*,*,#266,.F.);
#302=ORIENTED_EDGE('',*,*,#301,.T.);
#303=EDGE_LOOP('',(#293,#295,#297,#299,#300,#302));
#304=FACE_OUTER_BOUND('',#303,.F.);
#306=CARTESIAN_POINT('',(0.E0,5.E-1,0.E0));
#307=DIRECTION('',(0.E0,1.E0,0.E0));
#308=DIRECTION('',(-1.E0,0.E0,0.E0));
#309=AXIS2_PLACEMENT_3D('',#306,#307,#308);
#310=PLANE('',#309);
#311=ORIENTED_EDGE('',*,*,#292,.F.);
#313=ORIENTED_EDGE('',*,*,#312,.T.);
#315=ORIENTED_EDGE('',*,*,#314,.F.);
#316=EDGE_LOOP('',(#311,#313,#315));
#317=FACE_OUTER_BOUND('',#316,.F.);
#319=CARTESIAN_POINT('',(1.6E0,0.E0,-1.35E0));
#320=DIRECTION('',(0.E0,0.E0,-1.E0));
#321=DIRECTION('',(-1.E0,0.E0,0.E0));
#322=AXIS2_PLACEMENT_3D('',#319,#320,#321);
#323=PLANE('',#322);
#324=ORIENTED_EDGE('',*,*,#312,.F.);
#325=ORIENTED_EDGE('',*,*,#301,.F.);
#326=ORIENTED_EDGE('',*,*,#272,.F.);
#328=ORIENTED_EDGE('',*,*,#327,.T.);
#330=ORIENTED_EDGE('',*,*,#329,.T.);
#332=ORIENTED_EDGE('',*,*,#331,.T.);
#333=EDGE_LOOP('',(#324,#325,#326,#328,#330,#332));
#334=FACE_OUTER_BOUND('',#333,.F.);
#336=CARTESIAN_POINT('',(1.6E0,0.E0,1.35E0));
#337=DIRECTION('',(1.E0,0.E0,0.E0));
#338=DIRECTION('',(0.E0,0.E0,-1.E0));
#339=AXIS2_PLACEMENT_3D('',#336,#337,#338);
#340=PLANE('',#339);
#341=ORIENTED_EDGE('',*,*,#270,.F.);
#343=ORIENTED_EDGE('',*,*,#342,.T.);
#345=ORIENTED_EDGE('',*,*,#344,.T.);
#346=ORIENTED_EDGE('',*,*,#327,.F.);
#347=EDGE_LOOP('',(#341,#343,#345,#346));
#348=FACE_OUTER_BOUND('',#347,.F.);
#350=CARTESIAN_POINT('',(-1.6E0,0.E0,1.35E0));
#351=DIRECTION('',(0.E0,0.E0,1.E0));
#352=DIRECTION('',(1.E0,0.E0,0.E0));
#353=AXIS2_PLACEMENT_3D('',#350,#351,#352);
#354=PLANE('',#353);
#355=ORIENTED_EDGE('',*,*,#268,.F.);
#356=ORIENTED_EDGE('',*,*,#298,.T.);
#358=ORIENTED_EDGE('',*,*,#357,.T.);
#359=ORIENTED_EDGE('',*,*,#342,.F.);
#360=EDGE_LOOP('',(#355,#356,#358,#359));
#361=FACE_OUTER_BOUND('',#360,.F.);
#363=CARTESIAN_POINT('',(0.E0,9.E-1,0.E0));
#364=DIRECTION('',(0.E0,1.E0,0.E0));
#365=DIRECTION('',(1.E0,0.E0,0.E0));
#366=AXIS2_PLACEMENT_3D('',#363,#364,#365);
#367=PLANE('',#366);
#369=ORIENTED_EDGE('',*,*,#368,.T.);
#370=ORIENTED_EDGE('',*,*,#329,.F.);
#371=ORIENTED_EDGE('',*,*,#344,.F.);
#372=ORIENTED_EDGE('',*,*,#357,.F.);
#373=ORIENTED_EDGE('',*,*,#296,.F.);
#374=EDGE_LOOP('',(#369,#370,#371,#372,#373));
#375=FACE_OUTER_BOUND('',#374,.F.);
#377=CARTESIAN_POINT('',(-1.6E0,9.E-1,-5.5E-1));
#378=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
#379=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
#380=AXIS2_PLACEMENT_3D('',#377,#378,#379);
#381=PLANE('',#380);
#382=ORIENTED_EDGE('',*,*,#368,.F.);
#383=ORIENTED_EDGE('',*,*,#294,.T.);
#384=ORIENTED_EDGE('',*,*,#314,.T.);
#385=ORIENTED_EDGE('',*,*,#331,.F.);
#386=EDGE_LOOP('',(#382,#383,#384,#385));
#387=FACE_OUTER_BOUND('',#386,.F.);
#389=CARTESIAN_POINT('',(1.635266872537E0,0.E0,1.33E0));
#390=DIRECTION('',(0.E0,-1.391731009601E-1,9.902680687416E-1));
#391=DIRECTION('',(-1.E0,0.E0,0.E0));
#392=AXIS2_PLACEMENT_3D('',#389,#390,#391);
#393=PLANE('',#392);
#395=ORIENTED_EDGE('',*,*,#394,.T.);
#397=ORIENTED_EDGE('',*,*,#396,.F.);
#399=ORIENTED_EDGE('',*,*,#398,.T.);
#401=ORIENTED_EDGE('',*,*,#400,.T.);
#403=ORIENTED_EDGE('',*,*,#402,.F.);
#405=ORIENTED_EDGE('',*,*,#404,.F.);
#406=ORIENTED_EDGE('',*,*,#276,.F.);
#408=ORIENTED_EDGE('',*,*,#407,.T.);
#409=EDGE_LOOP('',(#395,#397,#399,#401,#403,#405,#406,#408));
#410=FACE_OUTER_BOUND('',#409,.F.);
#412=CARTESIAN_POINT('',(1.921839400879E0,-7.5E-1,-2.5E0));
#413=DIRECTION('',(0.E0,1.E0,0.E0));
#414=DIRECTION('',(-1.E0,0.E0,0.E0));
#415=AXIS2_PLACEMENT_3D('',#412,#413,#414);
#416=PLANE('',#415);
#417=ORIENTED_EDGE('',*,*,#394,.F.);
#419=ORIENTED_EDGE('',*,*,#418,.F.);
#421=ORIENTED_EDGE('',*,*,#420,.T.);
#423=ORIENTED_EDGE('',*,*,#422,.T.);
#424=EDGE_LOOP('',(#417,#419,#421,#423));
#425=FACE_OUTER_BOUND('',#424,.F.);
#427=CARTESIAN_POINT('',(1.58E0,0.E0,-1.385266872537E0));
#428=DIRECTION('',(9.902680687416E-1,-1.391731009601E-1,0.E0));
#429=DIRECTION('',(0.E0,0.E0,1.E0));
#430=AXIS2_PLACEMENT_3D('',#427,#428,#429);
#431=PLANE('',#430);
#432=ORIENTED_EDGE('',*,*,#418,.T.);
#433=ORIENTED_EDGE('',*,*,#407,.F.);
#434=ORIENTED_EDGE('',*,*,#282,.F.);
#436=ORIENTED_EDGE('',*,*,#435,.T.);
#437=EDGE_LOOP('',(#432,#433,#434,#436));
#438=FACE_OUTER_BOUND('',#437,.F.);
#440=CARTESIAN_POINT('',(-1.635266872537E0,0.E0,-1.33E0));
#441=DIRECTION('',(0.E0,-1.391731009601E-1,-9.902680687416E-1));
#442=DIRECTION('',(1.E0,0.E0,0.E0));
#443=AXIS2_PLACEMENT_3D('',#440,#441,#442);
#444=PLANE('',#443);
#445=ORIENTED_EDGE('',*,*,#420,.F.);
#446=ORIENTED_EDGE('',*,*,#435,.F.);
#447=ORIENTED_EDGE('',*,*,#280,.F.);
#449=ORIENTED_EDGE('',*,*,#448,.T.);
#451=ORIENTED_EDGE('',*,*,#450,.T.);
#453=ORIENTED_EDGE('',*,*,#452,.F.);
#455=ORIENTED_EDGE('',*,*,#454,.T.);
#457=ORIENTED_EDGE('',*,*,#456,.T.);
#458=EDGE_LOOP('',(#445,#446,#447,#449,#451,#453,#455,#457));
#459=FACE_OUTER_BOUND('',#458,.F.);
#461=CARTESIAN_POINT('',(-1.58E0,0.E0,1.385266872537E0));
#462=DIRECTION('',(-9.902680687416E-1,-1.391731009601E-1,0.E0));
#463=DIRECTION('',(0.E0,0.E0,-1.E0));
#464=AXIS2_PLACEMENT_3D('',#461,#462,#463);
#465=PLANE('',#464);
#467=ORIENTED_EDGE('',*,*,#466,.T.);
#468=ORIENTED_EDGE('',*,*,#448,.F.);
#469=ORIENTED_EDGE('',*,*,#278,.F.);
#470=ORIENTED_EDGE('',*,*,#404,.T.);
#471=EDGE_LOOP('',(#467,#468,#469,#470));
#472=FACE_OUTER_BOUND('',#471,.F.);
#474=CARTESIAN_POINT('',(-8.E-1,-7.5E-1,-2.5E0));
#475=DIRECTION('',(0.E0,1.E0,0.E0));
#476=DIRECTION('',(-1.E0,0.E0,0.E0));
#477=AXIS2_PLACEMENT_3D('',#474,#475,#476);
#478=PLANE('',#477);
#479=ORIENTED_EDGE('',*,*,#402,.T.);
#481=ORIENTED_EDGE('',*,*,#480,.F.);
#482=ORIENTED_EDGE('',*,*,#450,.F.);
#483=ORIENTED_EDGE('',*,*,#466,.F.);
#484=EDGE_LOOP('',(#479,#481,#482,#483));
#485=FACE_OUTER_BOUND('',#484,.F.);
#487=CARTESIAN_POINT('',(-8.E-1,-9.E-1,-2.5E0));
#488=DIRECTION('',(1.E0,0.E0,0.E0));
#489=DIRECTION('',(0.E0,1.E0,0.E0));
#490=AXIS2_PLACEMENT_3D('',#487,#488,#489);
#491=PLANE('',#490);
#493=ORIENTED_EDGE('',*,*,#492,.F.);
#494=ORIENTED_EDGE('',*,*,#452,.T.);
#495=ORIENTED_EDGE('',*,*,#480,.T.);
#496=ORIENTED_EDGE('',*,*,#400,.F.);
#497=EDGE_LOOP('',(#493,#494,#495,#496));
#498=FACE_OUTER_BOUND('',#497,.F.);
#500=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#501=DIRECTION('',(0.E0,-1.E0,0.E0));
#502=DIRECTION('',(1.E0,0.E0,0.E0));
#503=AXIS2_PLACEMENT_3D('',#500,#501,#502);
#504=PLANE('',#503);
#506=ORIENTED_EDGE('',*,*,#505,.F.);
#507=ORIENTED_EDGE('',*,*,#454,.F.);
#508=ORIENTED_EDGE('',*,*,#492,.T.);
#509=ORIENTED_EDGE('',*,*,#398,.F.);
#510=EDGE_LOOP('',(#506,#507,#508,#509));
#511=FACE_OUTER_BOUND('',#510,.F.);
#513=ORIENTED_EDGE('',*,*,#512,.T.);
#515=ORIENTED_EDGE('',*,*,#514,.T.);
#516=EDGE_LOOP('',(#513,#515));
#517=FACE_BOUND('',#516,.F.);
#519=CARTESIAN_POINT('',(8.E-1,-7.5E-1,-2.5E0));
#520=DIRECTION('',(-1.E0,0.E0,0.E0));
#521=DIRECTION('',(0.E0,-1.E0,0.E0));
#522=AXIS2_PLACEMENT_3D('',#519,#520,#521);
#523=PLANE('',#522);
#524=ORIENTED_EDGE('',*,*,#505,.T.);
#525=ORIENTED_EDGE('',*,*,#396,.T.);
#526=ORIENTED_EDGE('',*,*,#422,.F.);
#527=ORIENTED_EDGE('',*,*,#456,.F.);
#528=EDGE_LOOP('',(#524,#525,#526,#527));
#529=FACE_OUTER_BOUND('',#528,.F.);
#531=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#532=DIRECTION('',(0.E0,-1.E0,0.E0));
#533=DIRECTION('',(1.E0,0.E0,0.E0));
#534=AXIS2_PLACEMENT_3D('',#531,#532,#533);
#535=CYLINDRICAL_SURFACE('',#534,5.E-1);
#536=ORIENTED_EDGE('',*,*,#512,.F.);
#538=ORIENTED_EDGE('',*,*,#537,.T.);
#540=ORIENTED_EDGE('',*,*,#539,.T.);
#542=ORIENTED_EDGE('',*,*,#541,.F.);
#543=EDGE_LOOP('',(#536,#538,#540,#542));
#544=FACE_OUTER_BOUND('',#543,.F.);
#546=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#547=DIRECTION('',(0.E0,-1.E0,0.E0));
#548=DIRECTION('',(1.E0,0.E0,0.E0));
#549=AXIS2_PLACEMENT_3D('',#546,#547,#548);
#550=CYLINDRICAL_SURFACE('',#549,5.E-1);
#551=ORIENTED_EDGE('',*,*,#514,.F.);
#552=ORIENTED_EDGE('',*,*,#541,.T.);
#554=ORIENTED_EDGE('',*,*,#553,.T.);
#555=ORIENTED_EDGE('',*,*,#537,.F.);
#556=EDGE_LOOP('',(#551,#552,#554,#555));
#557=FACE_OUTER_BOUND('',#556,.F.);
#559=CARTESIAN_POINT('',(0.E0,-7.5E-1,0.E0));
#560=DIRECTION('',(0.E0,-1.E0,0.E0));
#561=DIRECTION('',(1.E0,0.E0,0.E0));
#562=AXIS2_PLACEMENT_3D('',#559,#560,#561);
#563=PLANE('',#562);
#564=ORIENTED_EDGE('',*,*,#539,.F.);
#565=ORIENTED_EDGE('',*,*,#553,.F.);
#566=EDGE_LOOP('',(#564,#565));
#567=FACE_OUTER_BOUND('',#566,.F.);
#569=CLOSED_SHELL('',(#286,#305,#318,#335,#349,#362,#376,#388,#411,#426,#439,
#460,#473,#486,#499,#518,#530,#545,#558,#568));
#570=MANIFOLD_SOLID_BREP('',#569);
#571=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#572=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#573=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#574=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#573);
#575=(CONVERSION_BASED_UNIT('DEGREE',#574)NAMED_UNIT(#572)PLANE_ANGLE_UNIT());
#576=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#577=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.605388488492E-4),#571,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#579=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#580=DIRECTION('',(0.E0,0.E0,1.E0));
#581=DIRECTION('',(1.E0,0.E0,0.E0));
#584=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#585=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#584);
#586=DESIGN_CONTEXT('',#584,'design');
#587=MECHANICAL_CONTEXT('',#584,'mechanical');
#588=PRODUCT('PPA','PPA','NOT SPECIFIED',(#587));
#589=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#588,
.MADE.);
#598=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#599=DIRECTION('',(0.E0,0.E0,1.E0));
#600=DIRECTION('',(1.E0,0.E0,0.E0));
#601=AXIS2_PLACEMENT_3D('',#598,#599,#600);
#602=ITEM_DEFINED_TRANSFORMATION('','',#582,#601);
#603=(REPRESENTATION_RELATIONSHIP('','',#583,#595)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#602)SHAPE_REPRESENTATION_RELATIONSHIP());
#604=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#603,#597);
#605=CARTESIAN_POINT('',(-1.6E0,0.E0,3.160089789808E-1));
#606=DIRECTION('',(0.E0,0.E0,-1.E0));
#607=DIRECTION('',(-1.E0,0.E0,0.E0));
#608=AXIS2_PLACEMENT_3D('',#605,#606,#607);
#610=DIRECTION('',(0.E0,-1.E0,0.E0));
#611=VECTOR('',#610,7.5E-1);
#612=CARTESIAN_POINT('',(-1.75E0,0.E0,3.160089789808E-1));
#613=LINE('',#612,#611);
#614=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.160089789808E-1));
#615=DIRECTION('',(0.E0,0.E0,-1.E0));
#616=DIRECTION('',(0.E0,-1.E0,0.E0));
#617=AXIS2_PLACEMENT_3D('',#614,#615,#616);
#619=CARTESIAN_POINT('',(-1.6E0,0.E0,1.066008978981E0));
#620=DIRECTION('',(0.E0,0.E0,1.E0));
#621=DIRECTION('',(0.E0,1.E0,0.E0));
#622=AXIS2_PLACEMENT_3D('',#619,#620,#621);
#624=DIRECTION('',(0.E0,1.E0,0.E0));
#625=VECTOR('',#624,1.5E-1);
#626=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,1.066008978981E0));
#627=LINE('',#626,#625);
#628=DIRECTION('',(0.E0,-1.E0,0.E0));
#629=VECTOR('',#628,7.5E-1);
#630=CARTESIAN_POINT('',(-1.6E0,0.E0,1.066008978981E0));
#631=LINE('',#630,#629);
#632=DIRECTION('',(1.E0,0.E0,0.E0));
#633=VECTOR('',#632,6.5E-1);
#634=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,1.066008978981E0));
#635=LINE('',#634,#633);
#636=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,1.066008978981E0));
#637=DIRECTION('',(0.E0,0.E0,1.E0));
#638=DIRECTION('',(-1.E0,0.E0,0.E0));
#639=AXIS2_PLACEMENT_3D('',#636,#637,#638);
#641=DIRECTION('',(0.E0,1.E0,0.E0));
#642=VECTOR('',#641,7.5E-1);
#643=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,1.066008978981E0));
#644=LINE('',#643,#642);
#645=DIRECTION('',(0.E0,0.E0,1.E0));
#646=VECTOR('',#645,7.5E-1);
#647=CARTESIAN_POINT('',(-1.6E0,1.5E-1,3.160089789808E-1));
#648=LINE('',#647,#646);
#649=DIRECTION('',(1.E0,0.E0,0.E0));
#650=VECTOR('',#649,3.773792231998E-1);
#651=CARTESIAN_POINT('',(-1.6E0,1.5E-1,3.160089789808E-1));
#652=LINE('',#651,#650);
#653=DIRECTION('',(0.E0,0.E0,1.E0));
#654=VECTOR('',#653,7.5E-1);
#655=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,3.160089789808E-1));
#656=LINE('',#655,#654);
#657=DIRECTION('',(-1.E0,0.E0,0.E0));
#658=VECTOR('',#657,3.773792231998E-1);
#659=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,1.066008978981E0));
#660=LINE('',#659,#658);
#661=DIRECTION('',(0.E0,1.E0,0.E0));
#662=VECTOR('',#661,1.5E-1);
#663=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,3.160089789808E-1));
#664=LINE('',#663,#662);
#665=DIRECTION('',(0.E0,0.E0,-1.E0));
#666=VECTOR('',#665,7.5E-1);
#667=CARTESIAN_POINT('',(-1.6E0,0.E0,1.066008978981E0));
#668=LINE('',#667,#666);
#669=DIRECTION('',(-1.E0,0.E0,0.E0));
#670=VECTOR('',#669,3.773792231998E-1);
#671=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,1.066008978981E0));
#672=LINE('',#671,#670);
#673=DIRECTION('',(0.E0,0.E0,1.E0));
#674=VECTOR('',#673,7.5E-1);
#675=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,3.160089789808E-1));
#676=LINE('',#675,#674);
#677=DIRECTION('',(1.E0,0.E0,0.E0));
#678=VECTOR('',#677,3.773792231998E-1);
#679=CARTESIAN_POINT('',(-1.6E0,0.E0,3.160089789808E-1));
#680=LINE('',#679,#678);
#681=DIRECTION('',(0.E0,0.E0,1.E0));
#682=VECTOR('',#681,7.5E-1);
#683=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.160089789808E-1));
#684=LINE('',#683,#682);
#685=DIRECTION('',(0.E0,-1.E0,0.E0));
#686=VECTOR('',#685,7.5E-1);
#687=CARTESIAN_POINT('',(-1.6E0,0.E0,3.160089789808E-1));
#688=LINE('',#687,#686);
#689=DIRECTION('',(1.E0,0.E0,0.E0));
#690=VECTOR('',#689,6.5E-1);
#691=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.160089789808E-1));
#692=LINE('',#691,#690);
#693=DIRECTION('',(0.E0,1.E0,0.E0));
#694=VECTOR('',#693,1.5E-1);
#695=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,3.160089789808E-1));
#696=LINE('',#695,#694);
#697=DIRECTION('',(0.E0,0.E0,-1.E0));
#698=VECTOR('',#697,7.5E-1);
#699=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,1.066008978981E0));
#700=LINE('',#699,#698);
#701=DIRECTION('',(0.E0,-1.E0,0.E0));
#702=VECTOR('',#701,1.5E-1);
#703=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,1.066008978981E0));
#704=LINE('',#703,#702);
#705=DIRECTION('',(0.E0,0.E0,1.E0));
#706=VECTOR('',#705,7.5E-1);
#707=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,3.160089789808E-1));
#708=LINE('',#707,#706);
#709=DIRECTION('',(0.E0,0.E0,-1.E0));
#710=VECTOR('',#709,7.5E-1);
#711=CARTESIAN_POINT('',(-1.6E0,-9.E-1,1.066008978981E0));
#712=LINE('',#711,#710);
#713=DIRECTION('',(1.E0,0.E0,0.E0));
#714=VECTOR('',#713,6.5E-1);
#715=CARTESIAN_POINT('',(-1.6E0,-9.E-1,1.066008978981E0));
#716=LINE('',#715,#714);
#717=DIRECTION('',(-1.E0,0.E0,0.E0));
#718=VECTOR('',#717,6.5E-1);
#719=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,3.160089789808E-1));
#720=LINE('',#719,#718);
#721=DIRECTION('',(0.E0,0.E0,1.E0));
#722=VECTOR('',#721,7.5E-1);
#723=CARTESIAN_POINT('',(-1.75E0,0.E0,3.160089789808E-1));
#724=LINE('',#723,#722);
#725=DIRECTION('',(0.E0,0.E0,-1.E0));
#726=VECTOR('',#725,7.5E-1);
#727=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,1.066008978981E0));
#728=LINE('',#727,#726);
#729=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,3.160089789808E-1));
#730=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,1.066008978981E0));
#731=VERTEX_POINT('',#729);
#732=VERTEX_POINT('',#730);
#733=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,3.160089789808E-1));
#734=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,1.066008978981E0));
#735=VERTEX_POINT('',#733);
#736=VERTEX_POINT('',#734);
#737=CARTESIAN_POINT('',(-1.6E0,0.E0,1.066008978981E0));
#738=CARTESIAN_POINT('',(-1.6E0,0.E0,3.160089789808E-1));
#739=VERTEX_POINT('',#737);
#740=VERTEX_POINT('',#738);
#741=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,3.160089789808E-1));
#742=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,3.160089789808E-1));
#743=VERTEX_POINT('',#741);
#744=VERTEX_POINT('',#742);
#745=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,1.066008978981E0));
#746=VERTEX_POINT('',#745);
#747=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,1.066008978981E0));
#748=VERTEX_POINT('',#747);
#749=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.160089789808E-1));
#750=VERTEX_POINT('',#749);
#751=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,1.066008978981E0));
#752=VERTEX_POINT('',#751);
#753=CARTESIAN_POINT('',(-1.6E0,1.5E-1,1.066008978981E0));
#754=CARTESIAN_POINT('',(-1.75E0,0.E0,1.066008978981E0));
#755=VERTEX_POINT('',#753);
#756=VERTEX_POINT('',#754);
#757=CARTESIAN_POINT('',(-1.75E0,0.E0,3.160089789808E-1));
#758=VERTEX_POINT('',#757);
#759=CARTESIAN_POINT('',(-1.6E0,1.5E-1,3.160089789808E-1));
#760=VERTEX_POINT('',#759);
#761=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,3.160089789808E-1));
#762=VERTEX_POINT('',#761);
#763=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,1.066008978981E0));
#764=VERTEX_POINT('',#763);
#765=CARTESIAN_POINT('',(-1.6E0,-9.E-1,3.160089789808E-1));
#766=VERTEX_POINT('',#765);
#767=CARTESIAN_POINT('',(-1.6E0,-9.E-1,1.066008978981E0));
#768=VERTEX_POINT('',#767);
#769=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.845307588980E0));
#770=DIRECTION('',(0.E0,0.E0,-1.E0));
#771=DIRECTION('',(0.E0,-1.E0,0.E0));
#772=AXIS2_PLACEMENT_3D('',#769,#770,#771);
#773=CYLINDRICAL_SURFACE('',#772,1.5E-1);
#775=ORIENTED_EDGE('',*,*,#774,.T.);
#777=ORIENTED_EDGE('',*,*,#776,.F.);
#779=ORIENTED_EDGE('',*,*,#778,.T.);
#781=ORIENTED_EDGE('',*,*,#780,.T.);
#782=EDGE_LOOP('',(#775,#777,#779,#781));
#783=FACE_OUTER_BOUND('',#782,.F.);
#785=CARTESIAN_POINT('',(-1.75E0,0.E0,3.160089789808E-1));
#786=DIRECTION('',(0.E0,0.E0,-1.E0));
#787=DIRECTION('',(1.E0,0.E0,0.E0));
#788=AXIS2_PLACEMENT_3D('',#785,#786,#787);
#789=PLANE('',#788);
#791=ORIENTED_EDGE('',*,*,#790,.F.);
#793=ORIENTED_EDGE('',*,*,#792,.T.);
#794=ORIENTED_EDGE('',*,*,#774,.F.);
#796=ORIENTED_EDGE('',*,*,#795,.F.);
#798=ORIENTED_EDGE('',*,*,#797,.T.);
#800=ORIENTED_EDGE('',*,*,#799,.F.);
#802=ORIENTED_EDGE('',*,*,#801,.F.);
#804=ORIENTED_EDGE('',*,*,#803,.T.);
#806=ORIENTED_EDGE('',*,*,#805,.T.);
#808=ORIENTED_EDGE('',*,*,#807,.F.);
#809=EDGE_LOOP('',(#791,#793,#794,#796,#798,#800,#802,#804,#806,#808));
#810=FACE_OUTER_BOUND('',#809,.F.);
#812=CARTESIAN_POINT('',(-1.6E0,0.E0,-3.845307588980E0));
#813=DIRECTION('',(0.E0,0.E0,1.E0));
#814=DIRECTION('',(0.E0,1.E0,0.E0));
#815=AXIS2_PLACEMENT_3D('',#812,#813,#814);
#816=CYLINDRICAL_SURFACE('',#815,1.5E-1);
#818=ORIENTED_EDGE('',*,*,#817,.T.);
#820=ORIENTED_EDGE('',*,*,#819,.F.);
#821=ORIENTED_EDGE('',*,*,#790,.T.);
#823=ORIENTED_EDGE('',*,*,#822,.T.);
#824=EDGE_LOOP('',(#818,#820,#821,#823));
#825=FACE_OUTER_BOUND('',#824,.F.);
#827=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,1.066008978981E0));
#828=DIRECTION('',(0.E0,0.E0,1.E0));
#829=DIRECTION('',(-1.E0,0.E0,0.E0));
#830=AXIS2_PLACEMENT_3D('',#827,#828,#829);
#831=PLANE('',#830);
#832=ORIENTED_EDGE('',*,*,#817,.F.);
#834=ORIENTED_EDGE('',*,*,#833,.F.);
#836=ORIENTED_EDGE('',*,*,#835,.F.);
#838=ORIENTED_EDGE('',*,*,#837,.T.);
#840=ORIENTED_EDGE('',*,*,#839,.T.);
#842=ORIENTED_EDGE('',*,*,#841,.T.);
#844=ORIENTED_EDGE('',*,*,#843,.T.);
#846=ORIENTED_EDGE('',*,*,#845,.F.);
#847=ORIENTED_EDGE('',*,*,#778,.F.);
#849=ORIENTED_EDGE('',*,*,#848,.T.);
#850=EDGE_LOOP('',(#832,#834,#836,#838,#840,#842,#844,#846,#847,#849));
#851=FACE_OUTER_BOUND('',#850,.F.);
#853=CARTESIAN_POINT('',(0.E0,1.5E-1,0.E0));
#854=DIRECTION('',(0.E0,-1.E0,0.E0));
#855=DIRECTION('',(1.E0,0.E0,0.E0));
#856=AXIS2_PLACEMENT_3D('',#853,#854,#855);
#857=PLANE('',#856);
#858=ORIENTED_EDGE('',*,*,#822,.F.);
#859=ORIENTED_EDGE('',*,*,#807,.T.);
#861=ORIENTED_EDGE('',*,*,#860,.T.);
#862=ORIENTED_EDGE('',*,*,#833,.T.);
#863=EDGE_LOOP('',(#858,#859,#861,#862));
#864=FACE_OUTER_BOUND('',#863,.F.);
#866=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,3.160089789808E-1));
#867=DIRECTION('',(1.E0,0.E0,0.E0));
#868=DIRECTION('',(0.E0,0.E0,1.E0));
#869=AXIS2_PLACEMENT_3D('',#866,#867,#868);
#870=PLANE('',#869);
#872=ORIENTED_EDGE('',*,*,#871,.T.);
#873=ORIENTED_EDGE('',*,*,#835,.T.);
#874=ORIENTED_EDGE('',*,*,#860,.F.);
#875=ORIENTED_EDGE('',*,*,#805,.F.);
#876=EDGE_LOOP('',(#872,#873,#874,#875));
#877=FACE_OUTER_BOUND('',#876,.F.);
#879=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#880=DIRECTION('',(0.E0,-1.E0,0.E0));
#881=DIRECTION('',(1.E0,0.E0,0.E0));
#882=AXIS2_PLACEMENT_3D('',#879,#880,#881);
#883=PLANE('',#882);
#885=ORIENTED_EDGE('',*,*,#884,.F.);
#886=ORIENTED_EDGE('',*,*,#837,.F.);
#887=ORIENTED_EDGE('',*,*,#871,.F.);
#888=ORIENTED_EDGE('',*,*,#803,.F.);
#889=EDGE_LOOP('',(#885,#886,#887,#888));
#890=FACE_OUTER_BOUND('',#889,.F.);
#892=CARTESIAN_POINT('',(-1.6E0,0.E0,3.160089789808E-1));
#893=DIRECTION('',(1.E0,0.E0,0.E0));
#894=DIRECTION('',(0.E0,0.E0,1.E0));
#895=AXIS2_PLACEMENT_3D('',#892,#893,#894);
#896=PLANE('',#895);
#898=ORIENTED_EDGE('',*,*,#897,.T.);
#899=ORIENTED_EDGE('',*,*,#839,.F.);
#900=ORIENTED_EDGE('',*,*,#884,.T.);
#901=ORIENTED_EDGE('',*,*,#801,.T.);
#902=EDGE_LOOP('',(#898,#899,#900,#901));
#903=FACE_OUTER_BOUND('',#902,.F.);
#905=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.160089789808E-1));
#906=DIRECTION('',(0.E0,1.E0,0.E0));
#907=DIRECTION('',(0.E0,0.E0,1.E0));
#908=AXIS2_PLACEMENT_3D('',#905,#906,#907);
#909=PLANE('',#908);
#910=ORIENTED_EDGE('',*,*,#799,.T.);
#912=ORIENTED_EDGE('',*,*,#911,.T.);
#913=ORIENTED_EDGE('',*,*,#841,.F.);
#914=ORIENTED_EDGE('',*,*,#897,.F.);
#915=EDGE_LOOP('',(#910,#912,#913,#914));
#916=FACE_OUTER_BOUND('',#915,.F.);
#918=CARTESIAN_POINT('',(-9.5E-1,0.E0,0.E0));
#919=DIRECTION('',(1.E0,0.E0,0.E0));
#920=DIRECTION('',(0.E0,0.E0,1.E0));
#921=AXIS2_PLACEMENT_3D('',#918,#919,#920);
#922=PLANE('',#921);
#923=ORIENTED_EDGE('',*,*,#797,.F.);
#925=ORIENTED_EDGE('',*,*,#924,.F.);
#926=ORIENTED_EDGE('',*,*,#843,.F.);
#927=ORIENTED_EDGE('',*,*,#911,.F.);
#928=EDGE_LOOP('',(#923,#925,#926,#927));
#929=FACE_OUTER_BOUND('',#928,.F.);
#931=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#932=DIRECTION('',(0.E0,-1.E0,0.E0));
#933=DIRECTION('',(1.E0,0.E0,0.E0));
#934=AXIS2_PLACEMENT_3D('',#931,#932,#933);
#935=PLANE('',#934);
#936=ORIENTED_EDGE('',*,*,#780,.F.);
#937=ORIENTED_EDGE('',*,*,#845,.T.);
#938=ORIENTED_EDGE('',*,*,#924,.T.);
#939=ORIENTED_EDGE('',*,*,#795,.T.);
#940=EDGE_LOOP('',(#936,#937,#938,#939));
#941=FACE_OUTER_BOUND('',#940,.F.);
#943=CARTESIAN_POINT('',(-1.75E0,0.E0,1.066008978981E0));
#944=DIRECTION('',(-1.E0,0.E0,0.E0));
#945=DIRECTION('',(0.E0,0.E0,-1.E0));
#946=AXIS2_PLACEMENT_3D('',#943,#944,#945);
#947=PLANE('',#946);
#948=ORIENTED_EDGE('',*,*,#819,.T.);
#949=ORIENTED_EDGE('',*,*,#848,.F.);
#950=ORIENTED_EDGE('',*,*,#776,.T.);
#951=ORIENTED_EDGE('',*,*,#792,.F.);
#952=EDGE_LOOP('',(#948,#949,#950,#951));
#953=FACE_OUTER_BOUND('',#952,.F.);
#955=CLOSED_SHELL('',(#784,#811,#826,#852,#865,#878,#891,#904,#917,#930,#942,
#954));
#956=MANIFOLD_SOLID_BREP('',#955);
#957=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.066008978981E0));
#958=DIRECTION('',(0.E0,0.E0,-1.E0));
#959=DIRECTION('',(-1.E0,0.E0,0.E0));
#960=AXIS2_PLACEMENT_3D('',#957,#958,#959);
#962=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-1.066008978981E0));
#963=DIRECTION('',(0.E0,0.E0,-1.E0));
#964=DIRECTION('',(0.E0,-1.E0,0.E0));
#965=AXIS2_PLACEMENT_3D('',#962,#963,#964);
#967=DIRECTION('',(1.E0,0.E0,0.E0));
#968=VECTOR('',#967,6.5E-1);
#969=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-1.066008978981E0));
#970=LINE('',#969,#968);
#971=CARTESIAN_POINT('',(-1.6E0,0.E0,-3.160089789808E-1));
#972=DIRECTION('',(0.E0,0.E0,1.E0));
#973=DIRECTION('',(0.E0,1.E0,0.E0));
#974=AXIS2_PLACEMENT_3D('',#971,#972,#973);
#976=DIRECTION('',(0.E0,1.E0,0.E0));
#977=VECTOR('',#976,1.5E-1);
#978=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-3.160089789808E-1));
#979=LINE('',#978,#977);
#980=DIRECTION('',(0.E0,-1.E0,0.E0));
#981=VECTOR('',#980,7.5E-1);
#982=CARTESIAN_POINT('',(-1.6E0,0.E0,-3.160089789808E-1));
#983=LINE('',#982,#981);
#984=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-3.160089789808E-1));
#985=DIRECTION('',(0.E0,0.E0,1.E0));
#986=DIRECTION('',(-1.E0,0.E0,0.E0));
#987=AXIS2_PLACEMENT_3D('',#984,#985,#986);
#989=DIRECTION('',(0.E0,0.E0,1.E0));
#990=VECTOR('',#989,7.5E-1);
#991=CARTESIAN_POINT('',(-1.6E0,1.5E-1,-1.066008978981E0));
#992=LINE('',#991,#990);
#993=DIRECTION('',(1.E0,0.E0,0.E0));
#994=VECTOR('',#993,3.773792231998E-1);
#995=CARTESIAN_POINT('',(-1.6E0,1.5E-1,-1.066008978981E0));
#996=LINE('',#995,#994);
#997=DIRECTION('',(0.E0,0.E0,1.E0));
#998=VECTOR('',#997,7.5E-1);
#999=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,-1.066008978981E0));
#1000=LINE('',#999,#998);
#1001=DIRECTION('',(-1.E0,0.E0,0.E0));
#1002=VECTOR('',#1001,3.773792231998E-1);
#1003=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,-3.160089789808E-1));
#1004=LINE('',#1003,#1002);
#1005=DIRECTION('',(0.E0,1.E0,0.E0));
#1006=VECTOR('',#1005,1.5E-1);
#1007=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-1.066008978981E0));
#1008=LINE('',#1007,#1006);
#1009=DIRECTION('',(0.E0,0.E0,1.E0));
#1010=VECTOR('',#1009,7.5E-1);
#1011=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.066008978981E0));
#1012=LINE('',#1011,#1010);
#1013=DIRECTION('',(-1.E0,0.E0,0.E0));
#1014=VECTOR('',#1013,3.773792231998E-1);
#1015=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-3.160089789808E-1));
#1016=LINE('',#1015,#1014);
#1017=DIRECTION('',(0.E0,0.E0,1.E0));
#1018=VECTOR('',#1017,7.5E-1);
#1019=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-1.066008978981E0));
#1020=LINE('',#1019,#1018);
#1021=DIRECTION('',(1.E0,0.E0,0.E0));
#1022=VECTOR('',#1021,3.773792231998E-1);
#1023=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.066008978981E0));
#1024=LINE('',#1023,#1022);
#1025=DIRECTION('',(0.E0,0.E0,1.E0));
#1026=VECTOR('',#1025,7.5E-1);
#1027=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-1.066008978981E0));
#1028=LINE('',#1027,#1026);
#1029=DIRECTION('',(0.E0,-1.E0,0.E0));
#1030=VECTOR('',#1029,7.5E-1);
#1031=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.066008978981E0));
#1032=LINE('',#1031,#1030);
#1033=DIRECTION('',(1.E0,0.E0,0.E0));
#1034=VECTOR('',#1033,6.5E-1);
#1035=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-3.160089789808E-1));
#1036=LINE('',#1035,#1034);
#1037=DIRECTION('',(0.E0,1.E0,0.E0));
#1038=VECTOR('',#1037,1.5E-1);
#1039=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,-3.160089789808E-1));
#1040=LINE('',#1039,#1038);
#1041=DIRECTION('',(0.E0,0.E0,-1.E0));
#1042=VECTOR('',#1041,7.5E-1);
#1043=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,-3.160089789808E-1));
#1044=LINE('',#1043,#1042);
#1045=DIRECTION('',(0.E0,-1.E0,0.E0));
#1046=VECTOR('',#1045,1.5E-1);
#1047=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,-1.066008978981E0));
#1048=LINE('',#1047,#1046);
#1049=DIRECTION('',(0.E0,0.E0,1.E0));
#1050=VECTOR('',#1049,7.5E-1);
#1051=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,-1.066008978981E0));
#1052=LINE('',#1051,#1050);
#1053=DIRECTION('',(0.E0,0.E0,-1.E0));
#1054=VECTOR('',#1053,7.5E-1);
#1055=CARTESIAN_POINT('',(-1.6E0,-9.E-1,-3.160089789808E-1));
#1056=LINE('',#1055,#1054);
#1057=DIRECTION('',(1.E0,0.E0,0.E0));
#1058=VECTOR('',#1057,6.5E-1);
#1059=CARTESIAN_POINT('',(-1.6E0,-9.E-1,-3.160089789808E-1));
#1060=LINE('',#1059,#1058);
#1061=DIRECTION('',(-1.E0,0.E0,0.E0));
#1062=VECTOR('',#1061,6.5E-1);
#1063=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,-1.066008978981E0));
#1064=LINE('',#1063,#1062);
#1065=DIRECTION('',(0.E0,0.E0,1.E0));
#1066=VECTOR('',#1065,7.5E-1);
#1067=CARTESIAN_POINT('',(-1.75E0,0.E0,-1.066008978981E0));
#1068=LINE('',#1067,#1066);
#1069=DIRECTION('',(0.E0,-1.E0,0.E0));
#1070=VECTOR('',#1069,7.5E-1);
#1071=CARTESIAN_POINT('',(-1.75E0,0.E0,-3.160089789808E-1));
#1072=LINE('',#1071,#1070);
#1073=DIRECTION('',(0.E0,0.E0,-1.E0));
#1074=VECTOR('',#1073,7.5E-1);
#1075=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,-3.160089789808E-1));
#1076=LINE('',#1075,#1074);
#1077=DIRECTION('',(0.E0,1.E0,0.E0));
#1078=VECTOR('',#1077,7.5E-1);
#1079=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,-1.066008978981E0));
#1080=LINE('',#1079,#1078);
#1081=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-1.066008978981E0));
#1082=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-3.160089789808E-1));
#1083=VERTEX_POINT('',#1081);
#1084=VERTEX_POINT('',#1082);
#1085=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,-1.066008978981E0));
#1086=CARTESIAN_POINT('',(-1.222620776800E0,1.5E-1,-3.160089789808E-1));
#1087=VERTEX_POINT('',#1085);
#1088=VERTEX_POINT('',#1086);
#1089=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.066008978981E0));
#1090=CARTESIAN_POINT('',(-1.6E0,0.E0,-3.160089789808E-1));
#1091=VERTEX_POINT('',#1089);
#1092=VERTEX_POINT('',#1090);
#1093=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,-3.160089789808E-1));
#1094=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,-3.160089789808E-1));
#1095=VERTEX_POINT('',#1093);
#1096=VERTEX_POINT('',#1094);
#1097=CARTESIAN_POINT('',(-9.5E-1,-7.5E-1,-1.066008978981E0));
#1098=VERTEX_POINT('',#1097);
#1099=CARTESIAN_POINT('',(-9.5E-1,-9.E-1,-1.066008978981E0));
#1100=VERTEX_POINT('',#1099);
#1101=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-3.160089789808E-1));
#1102=VERTEX_POINT('',#1101);
#1103=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-1.066008978981E0));
#1104=VERTEX_POINT('',#1103);
#1105=CARTESIAN_POINT('',(-1.6E0,1.5E-1,-3.160089789808E-1));
#1106=CARTESIAN_POINT('',(-1.75E0,0.E0,-3.160089789808E-1));
#1107=VERTEX_POINT('',#1105);
#1108=VERTEX_POINT('',#1106);
#1109=CARTESIAN_POINT('',(-1.75E0,0.E0,-1.066008978981E0));
#1110=VERTEX_POINT('',#1109);
#1111=CARTESIAN_POINT('',(-1.6E0,1.5E-1,-1.066008978981E0));
#1112=VERTEX_POINT('',#1111);
#1113=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,-3.160089789808E-1));
#1114=VERTEX_POINT('',#1113);
#1115=CARTESIAN_POINT('',(-1.75E0,-7.5E-1,-1.066008978981E0));
#1116=VERTEX_POINT('',#1115);
#1117=CARTESIAN_POINT('',(-1.6E0,-9.E-1,-1.066008978981E0));
#1118=VERTEX_POINT('',#1117);
#1119=CARTESIAN_POINT('',(-1.6E0,-9.E-1,-3.160089789808E-1));
#1120=VERTEX_POINT('',#1119);
#1121=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,3.845307588980E0));
#1122=DIRECTION('',(0.E0,0.E0,-1.E0));
#1123=DIRECTION('',(0.E0,-1.E0,0.E0));
#1124=AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);
#1125=CYLINDRICAL_SURFACE('',#1124,1.5E-1);
#1127=ORIENTED_EDGE('',*,*,#1126,.T.);
#1129=ORIENTED_EDGE('',*,*,#1128,.F.);
#1131=ORIENTED_EDGE('',*,*,#1130,.T.);
#1133=ORIENTED_EDGE('',*,*,#1132,.T.);
#1134=EDGE_LOOP('',(#1127,#1129,#1131,#1133));
#1135=FACE_OUTER_BOUND('',#1134,.F.);
#1137=CARTESIAN_POINT('',(-1.75E0,0.E0,-1.066008978981E0));
#1138=DIRECTION('',(0.E0,0.E0,-1.E0));
#1139=DIRECTION('',(1.E0,0.E0,0.E0));
#1140=AXIS2_PLACEMENT_3D('',#1137,#1138,#1139);
#1141=PLANE('',#1140);
#1143=ORIENTED_EDGE('',*,*,#1142,.F.);
#1145=ORIENTED_EDGE('',*,*,#1144,.F.);
#1146=ORIENTED_EDGE('',*,*,#1126,.F.);
#1148=ORIENTED_EDGE('',*,*,#1147,.F.);
#1150=ORIENTED_EDGE('',*,*,#1149,.F.);
#1152=ORIENTED_EDGE('',*,*,#1151,.F.);
#1154=ORIENTED_EDGE('',*,*,#1153,.F.);
#1156=ORIENTED_EDGE('',*,*,#1155,.T.);
#1158=ORIENTED_EDGE('',*,*,#1157,.T.);
#1160=ORIENTED_EDGE('',*,*,#1159,.F.);
#1161=EDGE_LOOP('',(#1143,#1145,#1146,#1148,#1150,#1152,#1154,#1156,#1158,
#1160));
#1162=FACE_OUTER_BOUND('',#1161,.F.);
#1164=CARTESIAN_POINT('',(-1.6E0,0.E0,-3.845307588980E0));
#1165=DIRECTION('',(0.E0,0.E0,1.E0));
#1166=DIRECTION('',(0.E0,1.E0,0.E0));
#1167=AXIS2_PLACEMENT_3D('',#1164,#1165,#1166);
#1168=CYLINDRICAL_SURFACE('',#1167,1.5E-1);
#1170=ORIENTED_EDGE('',*,*,#1169,.T.);
#1172=ORIENTED_EDGE('',*,*,#1171,.F.);
#1173=ORIENTED_EDGE('',*,*,#1142,.T.);
#1175=ORIENTED_EDGE('',*,*,#1174,.T.);
#1176=EDGE_LOOP('',(#1170,#1172,#1173,#1175));
#1177=FACE_OUTER_BOUND('',#1176,.F.);
#1179=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-3.160089789808E-1));
#1180=DIRECTION('',(0.E0,0.E0,1.E0));
#1181=DIRECTION('',(-1.E0,0.E0,0.E0));
#1182=AXIS2_PLACEMENT_3D('',#1179,#1180,#1181);
#1183=PLANE('',#1182);
#1184=ORIENTED_EDGE('',*,*,#1169,.F.);
#1186=ORIENTED_EDGE('',*,*,#1185,.F.);
#1188=ORIENTED_EDGE('',*,*,#1187,.F.);
#1190=ORIENTED_EDGE('',*,*,#1189,.T.);
#1192=ORIENTED_EDGE('',*,*,#1191,.T.);
#1194=ORIENTED_EDGE('',*,*,#1193,.T.);
#1196=ORIENTED_EDGE('',*,*,#1195,.F.);
#1198=ORIENTED_EDGE('',*,*,#1197,.F.);
#1199=ORIENTED_EDGE('',*,*,#1130,.F.);
#1201=ORIENTED_EDGE('',*,*,#1200,.F.);
#1202=EDGE_LOOP('',(#1184,#1186,#1188,#1190,#1192,#1194,#1196,#1198,#1199,
#1201));
#1203=FACE_OUTER_BOUND('',#1202,.F.);
#1205=CARTESIAN_POINT('',(0.E0,1.5E-1,0.E0));
#1206=DIRECTION('',(0.E0,-1.E0,0.E0));
#1207=DIRECTION('',(1.E0,0.E0,0.E0));
#1208=AXIS2_PLACEMENT_3D('',#1205,#1206,#1207);
#1209=PLANE('',#1208);
#1210=ORIENTED_EDGE('',*,*,#1174,.F.);
#1211=ORIENTED_EDGE('',*,*,#1159,.T.);
#1213=ORIENTED_EDGE('',*,*,#1212,.T.);
#1214=ORIENTED_EDGE('',*,*,#1185,.T.);
#1215=EDGE_LOOP('',(#1210,#1211,#1213,#1214));
#1216=FACE_OUTER_BOUND('',#1215,.F.);
#1218=CARTESIAN_POINT('',(-1.222620776800E0,0.E0,-1.066008978981E0));
#1219=DIRECTION('',(1.E0,0.E0,0.E0));
#1220=DIRECTION('',(0.E0,0.E0,1.E0));
#1221=AXIS2_PLACEMENT_3D('',#1218,#1219,#1220);
#1222=PLANE('',#1221);
#1224=ORIENTED_EDGE('',*,*,#1223,.T.);
#1225=ORIENTED_EDGE('',*,*,#1187,.T.);
#1226=ORIENTED_EDGE('',*,*,#1212,.F.);
#1227=ORIENTED_EDGE('',*,*,#1157,.F.);
#1228=EDGE_LOOP('',(#1224,#1225,#1226,#1227));
#1229=FACE_OUTER_BOUND('',#1228,.F.);
#1231=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1232=DIRECTION('',(0.E0,-1.E0,0.E0));
#1233=DIRECTION('',(1.E0,0.E0,0.E0));
#1234=AXIS2_PLACEMENT_3D('',#1231,#1232,#1233);
#1235=PLANE('',#1234);
#1237=ORIENTED_EDGE('',*,*,#1236,.T.);
#1238=ORIENTED_EDGE('',*,*,#1189,.F.);
#1239=ORIENTED_EDGE('',*,*,#1223,.F.);
#1240=ORIENTED_EDGE('',*,*,#1155,.F.);
#1241=EDGE_LOOP('',(#1237,#1238,#1239,#1240));
#1242=FACE_OUTER_BOUND('',#1241,.F.);
#1244=CARTESIAN_POINT('',(-1.6E0,0.E0,-1.066008978981E0));
#1245=DIRECTION('',(1.E0,0.E0,0.E0));
#1246=DIRECTION('',(0.E0,0.E0,1.E0));
#1247=AXIS2_PLACEMENT_3D('',#1244,#1245,#1246);
#1248=PLANE('',#1247);
#1250=ORIENTED_EDGE('',*,*,#1249,.T.);
#1251=ORIENTED_EDGE('',*,*,#1191,.F.);
#1252=ORIENTED_EDGE('',*,*,#1236,.F.);
#1253=ORIENTED_EDGE('',*,*,#1153,.T.);
#1254=EDGE_LOOP('',(#1250,#1251,#1252,#1253));
#1255=FACE_OUTER_BOUND('',#1254,.F.);
#1257=CARTESIAN_POINT('',(-1.6E0,-7.5E-1,-3.160089789808E-1));
#1258=DIRECTION('',(0.E0,-1.E0,0.E0));
#1259=DIRECTION('',(0.E0,0.E0,-1.E0));
#1260=AXIS2_PLACEMENT_3D('',#1257,#1258,#1259);
#1261=PLANE('',#1260);
#1262=ORIENTED_EDGE('',*,*,#1193,.F.);
#1263=ORIENTED_EDGE('',*,*,#1249,.F.);
#1264=ORIENTED_EDGE('',*,*,#1151,.T.);
#1266=ORIENTED_EDGE('',*,*,#1265,.F.);
#1267=EDGE_LOOP('',(#1262,#1263,#1264,#1266));
#1268=FACE_OUTER_BOUND('',#1267,.F.);
#1270=CARTESIAN_POINT('',(-9.5E-1,0.E0,0.E0));
#1271=DIRECTION('',(-1.E0,0.E0,0.E0));
#1272=DIRECTION('',(0.E0,0.E0,-1.E0));
#1273=AXIS2_PLACEMENT_3D('',#1270,#1271,#1272);
#1274=PLANE('',#1273);
#1275=ORIENTED_EDGE('',*,*,#1195,.T.);
#1276=ORIENTED_EDGE('',*,*,#1265,.T.);
#1277=ORIENTED_EDGE('',*,*,#1149,.T.);
#1279=ORIENTED_EDGE('',*,*,#1278,.T.);
#1280=EDGE_LOOP('',(#1275,#1276,#1277,#1279));
#1281=FACE_OUTER_BOUND('',#1280,.F.);
#1283=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#1284=DIRECTION('',(0.E0,-1.E0,0.E0));
#1285=DIRECTION('',(1.E0,0.E0,0.E0));
#1286=AXIS2_PLACEMENT_3D('',#1283,#1284,#1285);
#1287=PLANE('',#1286);
#1288=ORIENTED_EDGE('',*,*,#1132,.F.);
#1289=ORIENTED_EDGE('',*,*,#1197,.T.);
#1290=ORIENTED_EDGE('',*,*,#1278,.F.);
#1291=ORIENTED_EDGE('',*,*,#1147,.T.);
#1292=EDGE_LOOP('',(#1288,#1289,#1290,#1291));
#1293=FACE_OUTER_BOUND('',#1292,.F.);
#1295=CARTESIAN_POINT('',(-1.75E0,0.E0,-3.160089789808E-1));
#1296=DIRECTION('',(-1.E0,0.E0,0.E0));
#1297=DIRECTION('',(0.E0,0.E0,-1.E0));
#1298=AXIS2_PLACEMENT_3D('',#1295,#1296,#1297);
#1299=PLANE('',#1298);
#1300=ORIENTED_EDGE('',*,*,#1171,.T.);
#1301=ORIENTED_EDGE('',*,*,#1200,.T.);
#1302=ORIENTED_EDGE('',*,*,#1128,.T.);
#1303=ORIENTED_EDGE('',*,*,#1144,.T.);
#1304=EDGE_LOOP('',(#1300,#1301,#1302,#1303));
#1305=FACE_OUTER_BOUND('',#1304,.F.);
#1307=CLOSED_SHELL('',(#1136,#1163,#1178,#1204,#1217,#1230,#1243,#1256,#1269,
#1282,#1294,#1306));
#1308=MANIFOLD_SOLID_BREP('',#1307);
#1309=CARTESIAN_POINT('',(1.6E0,0.E0,1.066008978981E0));
#1310=DIRECTION('',(0.E0,0.E0,1.E0));
#1311=DIRECTION('',(1.E0,0.E0,0.E0));
#1312=AXIS2_PLACEMENT_3D('',#1309,#1310,#1311);
#1314=CARTESIAN_POINT('',(1.6E0,-7.5E-1,1.066008978981E0));
#1315=DIRECTION('',(0.E0,0.E0,1.E0));
#1316=DIRECTION('',(0.E0,-1.E0,0.E0));
#1317=AXIS2_PLACEMENT_3D('',#1314,#1315,#1316);
#1319=DIRECTION('',(-1.E0,0.E0,0.E0));
#1320=VECTOR('',#1319,6.5E-1);
#1321=CARTESIAN_POINT('',(1.6E0,-7.5E-1,1.066008978981E0));
#1322=LINE('',#1321,#1320);
#1323=CARTESIAN_POINT('',(1.6E0,0.E0,3.160089789808E-1));
#1324=DIRECTION('',(0.E0,0.E0,-1.E0));
#1325=DIRECTION('',(0.E0,1.E0,0.E0));
#1326=AXIS2_PLACEMENT_3D('',#1323,#1324,#1325);
#1328=DIRECTION('',(0.E0,1.E0,0.E0));
#1329=VECTOR('',#1328,1.5E-1);
#1330=CARTESIAN_POINT('',(1.222620776800E0,0.E0,3.160089789808E-1));
#1331=LINE('',#1330,#1329);
#1332=DIRECTION('',(0.E0,-1.E0,0.E0));
#1333=VECTOR('',#1332,7.5E-1);
#1334=CARTESIAN_POINT('',(1.6E0,0.E0,3.160089789808E-1));
#1335=LINE('',#1334,#1333);
#1336=CARTESIAN_POINT('',(1.6E0,-7.5E-1,3.160089789808E-1));
#1337=DIRECTION('',(0.E0,0.E0,-1.E0));
#1338=DIRECTION('',(1.E0,0.E0,0.E0));
#1339=AXIS2_PLACEMENT_3D('',#1336,#1337,#1338);
#1341=DIRECTION('',(0.E0,0.E0,-1.E0));
#1342=VECTOR('',#1341,7.5E-1);
#1343=CARTESIAN_POINT('',(1.6E0,1.5E-1,1.066008978981E0));
#1344=LINE('',#1343,#1342);
#1345=DIRECTION('',(-1.E0,0.E0,0.E0));
#1346=VECTOR('',#1345,3.773792231997E-1);
#1347=CARTESIAN_POINT('',(1.6E0,1.5E-1,1.066008978981E0));
#1348=LINE('',#1347,#1346);
#1349=DIRECTION('',(0.E0,0.E0,-1.E0));
#1350=VECTOR('',#1349,7.5E-1);
#1351=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,1.066008978981E0));
#1352=LINE('',#1351,#1350);
#1353=DIRECTION('',(1.E0,0.E0,0.E0));
#1354=VECTOR('',#1353,3.773792231997E-1);
#1355=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,3.160089789808E-1));
#1356=LINE('',#1355,#1354);
#1357=DIRECTION('',(0.E0,1.E0,0.E0));
#1358=VECTOR('',#1357,1.5E-1);
#1359=CARTESIAN_POINT('',(1.222620776800E0,0.E0,1.066008978981E0));
#1360=LINE('',#1359,#1358);
#1361=DIRECTION('',(0.E0,0.E0,-1.E0));
#1362=VECTOR('',#1361,7.5E-1);
#1363=CARTESIAN_POINT('',(1.6E0,0.E0,1.066008978981E0));
#1364=LINE('',#1363,#1362);
#1365=DIRECTION('',(1.E0,0.E0,0.E0));
#1366=VECTOR('',#1365,3.773792231997E-1);
#1367=CARTESIAN_POINT('',(1.222620776800E0,0.E0,3.160089789808E-1));
#1368=LINE('',#1367,#1366);
#1369=DIRECTION('',(0.E0,0.E0,-1.E0));
#1370=VECTOR('',#1369,7.5E-1);
#1371=CARTESIAN_POINT('',(1.222620776800E0,0.E0,1.066008978981E0));
#1372=LINE('',#1371,#1370);
#1373=DIRECTION('',(-1.E0,0.E0,0.E0));
#1374=VECTOR('',#1373,3.773792231997E-1);
#1375=CARTESIAN_POINT('',(1.6E0,0.E0,1.066008978981E0));
#1376=LINE('',#1375,#1374);
#1377=DIRECTION('',(0.E0,0.E0,-1.E0));
#1378=VECTOR('',#1377,7.5E-1);
#1379=CARTESIAN_POINT('',(1.6E0,-7.5E-1,1.066008978981E0));
#1380=LINE('',#1379,#1378);
#1381=DIRECTION('',(0.E0,-1.E0,0.E0));
#1382=VECTOR('',#1381,7.5E-1);
#1383=CARTESIAN_POINT('',(1.6E0,0.E0,1.066008978981E0));
#1384=LINE('',#1383,#1382);
#1385=DIRECTION('',(-1.E0,0.E0,0.E0));
#1386=VECTOR('',#1385,6.5E-1);
#1387=CARTESIAN_POINT('',(1.6E0,-7.5E-1,3.160089789808E-1));
#1388=LINE('',#1387,#1386);
#1389=DIRECTION('',(0.E0,1.E0,0.E0));
#1390=VECTOR('',#1389,1.5E-1);
#1391=CARTESIAN_POINT('',(9.5E-1,-9.E-1,3.160089789808E-1));
#1392=LINE('',#1391,#1390);
#1393=DIRECTION('',(0.E0,0.E0,1.E0));
#1394=VECTOR('',#1393,7.5E-1);
#1395=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,3.160089789808E-1));
#1396=LINE('',#1395,#1394);
#1397=DIRECTION('',(0.E0,-1.E0,0.E0));
#1398=VECTOR('',#1397,1.5E-1);
#1399=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,1.066008978981E0));
#1400=LINE('',#1399,#1398);
#1401=DIRECTION('',(0.E0,0.E0,-1.E0));
#1402=VECTOR('',#1401,7.5E-1);
#1403=CARTESIAN_POINT('',(9.5E-1,-9.E-1,1.066008978981E0));
#1404=LINE('',#1403,#1402);
#1405=DIRECTION('',(0.E0,0.E0,1.E0));
#1406=VECTOR('',#1405,7.5E-1);
#1407=CARTESIAN_POINT('',(1.6E0,-9.E-1,3.160089789808E-1));
#1408=LINE('',#1407,#1406);
#1409=DIRECTION('',(-1.E0,0.E0,0.E0));
#1410=VECTOR('',#1409,6.5E-1);
#1411=CARTESIAN_POINT('',(1.6E0,-9.E-1,3.160089789808E-1));
#1412=LINE('',#1411,#1410);
#1413=DIRECTION('',(1.E0,0.E0,0.E0));
#1414=VECTOR('',#1413,6.5E-1);
#1415=CARTESIAN_POINT('',(9.5E-1,-9.E-1,1.066008978981E0));
#1416=LINE('',#1415,#1414);
#1417=DIRECTION('',(0.E0,0.E0,-1.E0));
#1418=VECTOR('',#1417,7.5E-1);
#1419=CARTESIAN_POINT('',(1.75E0,0.E0,1.066008978981E0));
#1420=LINE('',#1419,#1418);
#1421=DIRECTION('',(0.E0,-1.E0,0.E0));
#1422=VECTOR('',#1421,7.5E-1);
#1423=CARTESIAN_POINT('',(1.75E0,0.E0,3.160089789808E-1));
#1424=LINE('',#1423,#1422);
#1425=DIRECTION('',(0.E0,0.E0,1.E0));
#1426=VECTOR('',#1425,7.5E-1);
#1427=CARTESIAN_POINT('',(1.75E0,-7.5E-1,3.160089789808E-1));
#1428=LINE('',#1427,#1426);
#1429=DIRECTION('',(0.E0,1.E0,0.E0));
#1430=VECTOR('',#1429,7.5E-1);
#1431=CARTESIAN_POINT('',(1.75E0,-7.5E-1,1.066008978981E0));
#1432=LINE('',#1431,#1430);
#1433=CARTESIAN_POINT('',(1.222620776800E0,0.E0,1.066008978981E0));
#1434=CARTESIAN_POINT('',(1.222620776800E0,0.E0,3.160089789808E-1));
#1435=VERTEX_POINT('',#1433);
#1436=VERTEX_POINT('',#1434);
#1437=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,1.066008978981E0));
#1438=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,3.160089789808E-1));
#1439=VERTEX_POINT('',#1437);
#1440=VERTEX_POINT('',#1438);
#1441=CARTESIAN_POINT('',(1.6E0,0.E0,1.066008978981E0));
#1442=CARTESIAN_POINT('',(1.6E0,0.E0,3.160089789808E-1));
#1443=VERTEX_POINT('',#1441);
#1444=VERTEX_POINT('',#1442);
#1445=CARTESIAN_POINT('',(9.5E-1,-9.E-1,3.160089789808E-1));
#1446=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,3.160089789808E-1));
#1447=VERTEX_POINT('',#1445);
#1448=VERTEX_POINT('',#1446);
#1449=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,1.066008978981E0));
#1450=VERTEX_POINT('',#1449);
#1451=CARTESIAN_POINT('',(9.5E-1,-9.E-1,1.066008978981E0));
#1452=VERTEX_POINT('',#1451);
#1453=CARTESIAN_POINT('',(1.6E0,-7.5E-1,3.160089789808E-1));
#1454=VERTEX_POINT('',#1453);
#1455=CARTESIAN_POINT('',(1.6E0,-7.5E-1,1.066008978981E0));
#1456=VERTEX_POINT('',#1455);
#1457=CARTESIAN_POINT('',(1.6E0,1.5E-1,3.160089789808E-1));
#1458=CARTESIAN_POINT('',(1.75E0,0.E0,3.160089789808E-1));
#1459=VERTEX_POINT('',#1457);
#1460=VERTEX_POINT('',#1458);
#1461=CARTESIAN_POINT('',(1.75E0,0.E0,1.066008978981E0));
#1462=VERTEX_POINT('',#1461);
#1463=CARTESIAN_POINT('',(1.6E0,1.5E-1,1.066008978981E0));
#1464=VERTEX_POINT('',#1463);
#1465=CARTESIAN_POINT('',(1.75E0,-7.5E-1,3.160089789808E-1));
#1466=VERTEX_POINT('',#1465);
#1467=CARTESIAN_POINT('',(1.75E0,-7.5E-1,1.066008978981E0));
#1468=VERTEX_POINT('',#1467);
#1469=CARTESIAN_POINT('',(1.6E0,-9.E-1,1.066008978981E0));
#1470=VERTEX_POINT('',#1469);
#1471=CARTESIAN_POINT('',(1.6E0,-9.E-1,3.160089789808E-1));
#1472=VERTEX_POINT('',#1471);
#1473=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.845307588980E0));
#1474=DIRECTION('',(0.E0,0.E0,1.E0));
#1475=DIRECTION('',(0.E0,-1.E0,0.E0));
#1476=AXIS2_PLACEMENT_3D('',#1473,#1474,#1475);
#1477=CYLINDRICAL_SURFACE('',#1476,1.5E-1);
#1479=ORIENTED_EDGE('',*,*,#1478,.T.);
#1481=ORIENTED_EDGE('',*,*,#1480,.F.);
#1483=ORIENTED_EDGE('',*,*,#1482,.T.);
#1485=ORIENTED_EDGE('',*,*,#1484,.T.);
#1486=EDGE_LOOP('',(#1479,#1481,#1483,#1485));
#1487=FACE_OUTER_BOUND('',#1486,.F.);
#1489=CARTESIAN_POINT('',(1.75E0,0.E0,1.066008978981E0));
#1490=DIRECTION('',(0.E0,0.E0,1.E0));
#1491=DIRECTION('',(-1.E0,0.E0,0.E0));
#1492=AXIS2_PLACEMENT_3D('',#1489,#1490,#1491);
#1493=PLANE('',#1492);
#1495=ORIENTED_EDGE('',*,*,#1494,.F.);
#1497=ORIENTED_EDGE('',*,*,#1496,.F.);
#1498=ORIENTED_EDGE('',*,*,#1478,.F.);
#1500=ORIENTED_EDGE('',*,*,#1499,.F.);
#1502=ORIENTED_EDGE('',*,*,#1501,.F.);
#1504=ORIENTED_EDGE('',*,*,#1503,.F.);
#1506=ORIENTED_EDGE('',*,*,#1505,.F.);
#1508=ORIENTED_EDGE('',*,*,#1507,.T.);
#1510=ORIENTED_EDGE('',*,*,#1509,.T.);
#1512=ORIENTED_EDGE('',*,*,#1511,.F.);
#1513=EDGE_LOOP('',(#1495,#1497,#1498,#1500,#1502,#1504,#1506,#1508,#1510,
#1512));
#1514=FACE_OUTER_BOUND('',#1513,.F.);
#1516=CARTESIAN_POINT('',(1.6E0,0.E0,3.845307588980E0));
#1517=DIRECTION('',(0.E0,0.E0,-1.E0));
#1518=DIRECTION('',(0.E0,1.E0,0.E0));
#1519=AXIS2_PLACEMENT_3D('',#1516,#1517,#1518);
#1520=CYLINDRICAL_SURFACE('',#1519,1.5E-1);
#1522=ORIENTED_EDGE('',*,*,#1521,.T.);
#1524=ORIENTED_EDGE('',*,*,#1523,.F.);
#1525=ORIENTED_EDGE('',*,*,#1494,.T.);
#1527=ORIENTED_EDGE('',*,*,#1526,.T.);
#1528=EDGE_LOOP('',(#1522,#1524,#1525,#1527));
#1529=FACE_OUTER_BOUND('',#1528,.F.);
#1531=CARTESIAN_POINT('',(1.222620776800E0,0.E0,3.160089789808E-1));
#1532=DIRECTION('',(0.E0,0.E0,-1.E0));
#1533=DIRECTION('',(1.E0,0.E0,0.E0));
#1534=AXIS2_PLACEMENT_3D('',#1531,#1532,#1533);
#1535=PLANE('',#1534);
#1536=ORIENTED_EDGE('',*,*,#1521,.F.);
#1538=ORIENTED_EDGE('',*,*,#1537,.F.);
#1540=ORIENTED_EDGE('',*,*,#1539,.F.);
#1542=ORIENTED_EDGE('',*,*,#1541,.T.);
#1544=ORIENTED_EDGE('',*,*,#1543,.T.);
#1546=ORIENTED_EDGE('',*,*,#1545,.T.);
#1548=ORIENTED_EDGE('',*,*,#1547,.F.);
#1550=ORIENTED_EDGE('',*,*,#1549,.F.);
#1551=ORIENTED_EDGE('',*,*,#1482,.F.);
#1553=ORIENTED_EDGE('',*,*,#1552,.F.);
#1554=EDGE_LOOP('',(#1536,#1538,#1540,#1542,#1544,#1546,#1548,#1550,#1551,
#1553));
#1555=FACE_OUTER_BOUND('',#1554,.F.);
#1557=CARTESIAN_POINT('',(0.E0,1.5E-1,0.E0));
#1558=DIRECTION('',(0.E0,-1.E0,0.E0));
#1559=DIRECTION('',(1.E0,0.E0,0.E0));
#1560=AXIS2_PLACEMENT_3D('',#1557,#1558,#1559);
#1561=PLANE('',#1560);
#1562=ORIENTED_EDGE('',*,*,#1526,.F.);
#1563=ORIENTED_EDGE('',*,*,#1511,.T.);
#1565=ORIENTED_EDGE('',*,*,#1564,.T.);
#1566=ORIENTED_EDGE('',*,*,#1537,.T.);
#1567=EDGE_LOOP('',(#1562,#1563,#1565,#1566));
#1568=FACE_OUTER_BOUND('',#1567,.F.);
#1570=CARTESIAN_POINT('',(1.222620776800E0,0.E0,1.066008978981E0));
#1571=DIRECTION('',(-1.E0,0.E0,0.E0));
#1572=DIRECTION('',(0.E0,0.E0,-1.E0));
#1573=AXIS2_PLACEMENT_3D('',#1570,#1571,#1572);
#1574=PLANE('',#1573);
#1576=ORIENTED_EDGE('',*,*,#1575,.T.);
#1577=ORIENTED_EDGE('',*,*,#1539,.T.);
#1578=ORIENTED_EDGE('',*,*,#1564,.F.);
#1579=ORIENTED_EDGE('',*,*,#1509,.F.);
#1580=EDGE_LOOP('',(#1576,#1577,#1578,#1579));
#1581=FACE_OUTER_BOUND('',#1580,.F.);
#1583=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1584=DIRECTION('',(0.E0,-1.E0,0.E0));
#1585=DIRECTION('',(1.E0,0.E0,0.E0));
#1586=AXIS2_PLACEMENT_3D('',#1583,#1584,#1585);
#1587=PLANE('',#1586);
#1589=ORIENTED_EDGE('',*,*,#1588,.T.);
#1590=ORIENTED_EDGE('',*,*,#1541,.F.);
#1591=ORIENTED_EDGE('',*,*,#1575,.F.);
#1592=ORIENTED_EDGE('',*,*,#1507,.F.);
#1593=EDGE_LOOP('',(#1589,#1590,#1591,#1592));
#1594=FACE_OUTER_BOUND('',#1593,.F.);
#1596=CARTESIAN_POINT('',(1.6E0,0.E0,1.066008978981E0));
#1597=DIRECTION('',(-1.E0,0.E0,0.E0));
#1598=DIRECTION('',(0.E0,0.E0,-1.E0));
#1599=AXIS2_PLACEMENT_3D('',#1596,#1597,#1598);
#1600=PLANE('',#1599);
#1602=ORIENTED_EDGE('',*,*,#1601,.T.);
#1603=ORIENTED_EDGE('',*,*,#1543,.F.);
#1604=ORIENTED_EDGE('',*,*,#1588,.F.);
#1605=ORIENTED_EDGE('',*,*,#1505,.T.);
#1606=EDGE_LOOP('',(#1602,#1603,#1604,#1605));
#1607=FACE_OUTER_BOUND('',#1606,.F.);
#1609=CARTESIAN_POINT('',(1.6E0,-7.5E-1,3.160089789808E-1));
#1610=DIRECTION('',(0.E0,-1.E0,0.E0));
#1611=DIRECTION('',(0.E0,0.E0,1.E0));
#1612=AXIS2_PLACEMENT_3D('',#1609,#1610,#1611);
#1613=PLANE('',#1612);
#1614=ORIENTED_EDGE('',*,*,#1545,.F.);
#1615=ORIENTED_EDGE('',*,*,#1601,.F.);
#1616=ORIENTED_EDGE('',*,*,#1503,.T.);
#1618=ORIENTED_EDGE('',*,*,#1617,.F.);
#1619=EDGE_LOOP('',(#1614,#1615,#1616,#1618));
#1620=FACE_OUTER_BOUND('',#1619,.F.);
#1622=CARTESIAN_POINT('',(9.5E-1,0.E0,0.E0));
#1623=DIRECTION('',(1.E0,0.E0,0.E0));
#1624=DIRECTION('',(0.E0,0.E0,1.E0));
#1625=AXIS2_PLACEMENT_3D('',#1622,#1623,#1624);
#1626=PLANE('',#1625);
#1627=ORIENTED_EDGE('',*,*,#1547,.T.);
#1628=ORIENTED_EDGE('',*,*,#1617,.T.);
#1629=ORIENTED_EDGE('',*,*,#1501,.T.);
#1631=ORIENTED_EDGE('',*,*,#1630,.T.);
#1632=EDGE_LOOP('',(#1627,#1628,#1629,#1631));
#1633=FACE_OUTER_BOUND('',#1632,.F.);
#1635=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#1636=DIRECTION('',(0.E0,-1.E0,0.E0));
#1637=DIRECTION('',(1.E0,0.E0,0.E0));
#1638=AXIS2_PLACEMENT_3D('',#1635,#1636,#1637);
#1639=PLANE('',#1638);
#1640=ORIENTED_EDGE('',*,*,#1484,.F.);
#1641=ORIENTED_EDGE('',*,*,#1549,.T.);
#1642=ORIENTED_EDGE('',*,*,#1630,.F.);
#1643=ORIENTED_EDGE('',*,*,#1499,.T.);
#1644=EDGE_LOOP('',(#1640,#1641,#1642,#1643));
#1645=FACE_OUTER_BOUND('',#1644,.F.);
#1647=CARTESIAN_POINT('',(1.75E0,0.E0,3.160089789808E-1));
#1648=DIRECTION('',(1.E0,0.E0,0.E0));
#1649=DIRECTION('',(0.E0,0.E0,1.E0));
#1650=AXIS2_PLACEMENT_3D('',#1647,#1648,#1649);
#1651=PLANE('',#1650);
#1652=ORIENTED_EDGE('',*,*,#1523,.T.);
#1653=ORIENTED_EDGE('',*,*,#1552,.T.);
#1654=ORIENTED_EDGE('',*,*,#1480,.T.);
#1655=ORIENTED_EDGE('',*,*,#1496,.T.);
#1656=EDGE_LOOP('',(#1652,#1653,#1654,#1655));
#1657=FACE_OUTER_BOUND('',#1656,.F.);
#1659=CLOSED_SHELL('',(#1488,#1515,#1530,#1556,#1569,#1582,#1595,#1608,#1621,
#1634,#1646,#1658));
#1660=MANIFOLD_SOLID_BREP('',#1659);
#1661=CARTESIAN_POINT('',(1.6E0,0.E0,-3.160089789808E-1));
#1662=DIRECTION('',(0.E0,0.E0,1.E0));
#1663=DIRECTION('',(1.E0,0.E0,0.E0));
#1664=AXIS2_PLACEMENT_3D('',#1661,#1662,#1663);
#1666=DIRECTION('',(0.E0,-1.E0,0.E0));
#1667=VECTOR('',#1666,7.5E-1);
#1668=CARTESIAN_POINT('',(1.75E0,0.E0,-3.160089789808E-1));
#1669=LINE('',#1668,#1667);
#1670=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.160089789808E-1));
#1671=DIRECTION('',(0.E0,0.E0,1.E0));
#1672=DIRECTION('',(0.E0,-1.E0,0.E0));
#1673=AXIS2_PLACEMENT_3D('',#1670,#1671,#1672);
#1675=CARTESIAN_POINT('',(1.6E0,0.E0,-1.066008978981E0));
#1676=DIRECTION('',(0.E0,0.E0,-1.E0));
#1677=DIRECTION('',(0.E0,1.E0,0.E0));
#1678=AXIS2_PLACEMENT_3D('',#1675,#1676,#1677);
#1680=DIRECTION('',(0.E0,1.E0,0.E0));
#1681=VECTOR('',#1680,1.5E-1);
#1682=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-1.066008978981E0));
#1683=LINE('',#1682,#1681);
#1684=DIRECTION('',(0.E0,-1.E0,0.E0));
#1685=VECTOR('',#1684,7.5E-1);
#1686=CARTESIAN_POINT('',(1.6E0,0.E0,-1.066008978981E0));
#1687=LINE('',#1686,#1685);
#1688=DIRECTION('',(-1.E0,0.E0,0.E0));
#1689=VECTOR('',#1688,6.5E-1);
#1690=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-1.066008978981E0));
#1691=LINE('',#1690,#1689);
#1692=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-1.066008978981E0));
#1693=DIRECTION('',(0.E0,0.E0,-1.E0));
#1694=DIRECTION('',(1.E0,0.E0,0.E0));
#1695=AXIS2_PLACEMENT_3D('',#1692,#1693,#1694);
#1697=DIRECTION('',(0.E0,1.E0,0.E0));
#1698=VECTOR('',#1697,7.5E-1);
#1699=CARTESIAN_POINT('',(1.75E0,-7.5E-1,-1.066008978981E0));
#1700=LINE('',#1699,#1698);
#1701=DIRECTION('',(0.E0,0.E0,-1.E0));
#1702=VECTOR('',#1701,7.5E-1);
#1703=CARTESIAN_POINT('',(1.6E0,1.5E-1,-3.160089789808E-1));
#1704=LINE('',#1703,#1702);
#1705=DIRECTION('',(-1.E0,0.E0,0.E0));
#1706=VECTOR('',#1705,3.773792231997E-1);
#1707=CARTESIAN_POINT('',(1.6E0,1.5E-1,-3.160089789808E-1));
#1708=LINE('',#1707,#1706);
#1709=DIRECTION('',(0.E0,0.E0,-1.E0));
#1710=VECTOR('',#1709,7.5E-1);
#1711=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,-3.160089789808E-1));
#1712=LINE('',#1711,#1710);
#1713=DIRECTION('',(1.E0,0.E0,0.E0));
#1714=VECTOR('',#1713,3.773792231997E-1);
#1715=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,-1.066008978981E0));
#1716=LINE('',#1715,#1714);
#1717=DIRECTION('',(0.E0,1.E0,0.E0));
#1718=VECTOR('',#1717,1.5E-1);
#1719=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-3.160089789808E-1));
#1720=LINE('',#1719,#1718);
#1721=DIRECTION('',(0.E0,0.E0,1.E0));
#1722=VECTOR('',#1721,7.5E-1);
#1723=CARTESIAN_POINT('',(1.6E0,0.E0,-1.066008978981E0));
#1724=LINE('',#1723,#1722);
#1725=DIRECTION('',(1.E0,0.E0,0.E0));
#1726=VECTOR('',#1725,3.773792231997E-1);
#1727=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-1.066008978981E0));
#1728=LINE('',#1727,#1726);
#1729=DIRECTION('',(0.E0,0.E0,-1.E0));
#1730=VECTOR('',#1729,7.5E-1);
#1731=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-3.160089789808E-1));
#1732=LINE('',#1731,#1730);
#1733=DIRECTION('',(-1.E0,0.E0,0.E0));
#1734=VECTOR('',#1733,3.773792231997E-1);
#1735=CARTESIAN_POINT('',(1.6E0,0.E0,-3.160089789808E-1));
#1736=LINE('',#1735,#1734);
#1737=DIRECTION('',(0.E0,0.E0,-1.E0));
#1738=VECTOR('',#1737,7.5E-1);
#1739=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.160089789808E-1));
#1740=LINE('',#1739,#1738);
#1741=DIRECTION('',(0.E0,-1.E0,0.E0));
#1742=VECTOR('',#1741,7.5E-1);
#1743=CARTESIAN_POINT('',(1.6E0,0.E0,-3.160089789808E-1));
#1744=LINE('',#1743,#1742);
#1745=DIRECTION('',(-1.E0,0.E0,0.E0));
#1746=VECTOR('',#1745,6.5E-1);
#1747=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.160089789808E-1));
#1748=LINE('',#1747,#1746);
#1749=DIRECTION('',(0.E0,1.E0,0.E0));
#1750=VECTOR('',#1749,1.5E-1);
#1751=CARTESIAN_POINT('',(9.5E-1,-9.E-1,-3.160089789808E-1));
#1752=LINE('',#1751,#1750);
#1753=DIRECTION('',(0.E0,0.E0,1.E0));
#1754=VECTOR('',#1753,7.5E-1);
#1755=CARTESIAN_POINT('',(9.5E-1,-9.E-1,-1.066008978981E0));
#1756=LINE('',#1755,#1754);
#1757=DIRECTION('',(0.E0,-1.E0,0.E0));
#1758=VECTOR('',#1757,1.5E-1);
#1759=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,-1.066008978981E0));
#1760=LINE('',#1759,#1758);
#1761=DIRECTION('',(0.E0,0.E0,-1.E0));
#1762=VECTOR('',#1761,7.5E-1);
#1763=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,-3.160089789808E-1));
#1764=LINE('',#1763,#1762);
#1765=DIRECTION('',(0.E0,0.E0,1.E0));
#1766=VECTOR('',#1765,7.5E-1);
#1767=CARTESIAN_POINT('',(1.6E0,-9.E-1,-1.066008978981E0));
#1768=LINE('',#1767,#1766);
#1769=DIRECTION('',(-1.E0,0.E0,0.E0));
#1770=VECTOR('',#1769,6.5E-1);
#1771=CARTESIAN_POINT('',(1.6E0,-9.E-1,-1.066008978981E0));
#1772=LINE('',#1771,#1770);
#1773=DIRECTION('',(1.E0,0.E0,0.E0));
#1774=VECTOR('',#1773,6.5E-1);
#1775=CARTESIAN_POINT('',(9.5E-1,-9.E-1,-3.160089789808E-1));
#1776=LINE('',#1775,#1774);
#1777=DIRECTION('',(0.E0,0.E0,-1.E0));
#1778=VECTOR('',#1777,7.5E-1);
#1779=CARTESIAN_POINT('',(1.75E0,0.E0,-3.160089789808E-1));
#1780=LINE('',#1779,#1778);
#1781=DIRECTION('',(0.E0,0.E0,1.E0));
#1782=VECTOR('',#1781,7.5E-1);
#1783=CARTESIAN_POINT('',(1.75E0,-7.5E-1,-1.066008978981E0));
#1784=LINE('',#1783,#1782);
#1785=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-3.160089789808E-1));
#1786=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-1.066008978981E0));
#1787=VERTEX_POINT('',#1785);
#1788=VERTEX_POINT('',#1786);
#1789=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,-3.160089789808E-1));
#1790=CARTESIAN_POINT('',(1.222620776800E0,1.5E-1,-1.066008978981E0));
#1791=VERTEX_POINT('',#1789);
#1792=VERTEX_POINT('',#1790);
#1793=CARTESIAN_POINT('',(1.6E0,0.E0,-1.066008978981E0));
#1794=CARTESIAN_POINT('',(1.6E0,0.E0,-3.160089789808E-1));
#1795=VERTEX_POINT('',#1793);
#1796=VERTEX_POINT('',#1794);
#1797=CARTESIAN_POINT('',(9.5E-1,-9.E-1,-3.160089789808E-1));
#1798=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,-3.160089789808E-1));
#1799=VERTEX_POINT('',#1797);
#1800=VERTEX_POINT('',#1798);
#1801=CARTESIAN_POINT('',(9.5E-1,-7.5E-1,-1.066008978981E0));
#1802=VERTEX_POINT('',#1801);
#1803=CARTESIAN_POINT('',(9.5E-1,-9.E-1,-1.066008978981E0));
#1804=VERTEX_POINT('',#1803);
#1805=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.160089789808E-1));
#1806=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-1.066008978981E0));
#1807=VERTEX_POINT('',#1805);
#1808=VERTEX_POINT('',#1806);
#1809=CARTESIAN_POINT('',(1.6E0,1.5E-1,-1.066008978981E0));
#1810=CARTESIAN_POINT('',(1.75E0,0.E0,-1.066008978981E0));
#1811=VERTEX_POINT('',#1809);
#1812=VERTEX_POINT('',#1810);
#1813=CARTESIAN_POINT('',(1.75E0,0.E0,-3.160089789808E-1));
#1814=VERTEX_POINT('',#1813);
#1815=CARTESIAN_POINT('',(1.6E0,1.5E-1,-3.160089789808E-1));
#1816=VERTEX_POINT('',#1815);
#1817=CARTESIAN_POINT('',(1.75E0,-7.5E-1,-3.160089789808E-1));
#1818=VERTEX_POINT('',#1817);
#1819=CARTESIAN_POINT('',(1.75E0,-7.5E-1,-1.066008978981E0));
#1820=VERTEX_POINT('',#1819);
#1821=CARTESIAN_POINT('',(1.6E0,-9.E-1,-3.160089789808E-1));
#1822=VERTEX_POINT('',#1821);
#1823=CARTESIAN_POINT('',(1.6E0,-9.E-1,-1.066008978981E0));
#1824=VERTEX_POINT('',#1823);
#1825=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.845307588980E0));
#1826=DIRECTION('',(0.E0,0.E0,1.E0));
#1827=DIRECTION('',(0.E0,-1.E0,0.E0));
#1828=AXIS2_PLACEMENT_3D('',#1825,#1826,#1827);
#1829=CYLINDRICAL_SURFACE('',#1828,1.5E-1);
#1831=ORIENTED_EDGE('',*,*,#1830,.T.);
#1833=ORIENTED_EDGE('',*,*,#1832,.F.);
#1835=ORIENTED_EDGE('',*,*,#1834,.T.);
#1837=ORIENTED_EDGE('',*,*,#1836,.T.);
#1838=EDGE_LOOP('',(#1831,#1833,#1835,#1837));
#1839=FACE_OUTER_BOUND('',#1838,.F.);
#1841=CARTESIAN_POINT('',(1.75E0,0.E0,-3.160089789808E-1));
#1842=DIRECTION('',(0.E0,0.E0,1.E0));
#1843=DIRECTION('',(-1.E0,0.E0,0.E0));
#1844=AXIS2_PLACEMENT_3D('',#1841,#1842,#1843);
#1845=PLANE('',#1844);
#1847=ORIENTED_EDGE('',*,*,#1846,.F.);
#1849=ORIENTED_EDGE('',*,*,#1848,.T.);
#1850=ORIENTED_EDGE('',*,*,#1830,.F.);
#1852=ORIENTED_EDGE('',*,*,#1851,.F.);
#1854=ORIENTED_EDGE('',*,*,#1853,.T.);
#1856=ORIENTED_EDGE('',*,*,#1855,.F.);
#1858=ORIENTED_EDGE('',*,*,#1857,.F.);
#1860=ORIENTED_EDGE('',*,*,#1859,.T.);
#1862=ORIENTED_EDGE('',*,*,#1861,.T.);
#1864=ORIENTED_EDGE('',*,*,#1863,.F.);
#1865=EDGE_LOOP('',(#1847,#1849,#1850,#1852,#1854,#1856,#1858,#1860,#1862,
#1864));
#1866=FACE_OUTER_BOUND('',#1865,.F.);
#1868=CARTESIAN_POINT('',(1.6E0,0.E0,3.845307588980E0));
#1869=DIRECTION('',(0.E0,0.E0,-1.E0));
#1870=DIRECTION('',(0.E0,1.E0,0.E0));
#1871=AXIS2_PLACEMENT_3D('',#1868,#1869,#1870);
#1872=CYLINDRICAL_SURFACE('',#1871,1.5E-1);
#1874=ORIENTED_EDGE('',*,*,#1873,.T.);
#1876=ORIENTED_EDGE('',*,*,#1875,.F.);
#1877=ORIENTED_EDGE('',*,*,#1846,.T.);
#1879=ORIENTED_EDGE('',*,*,#1878,.T.);
#1880=EDGE_LOOP('',(#1874,#1876,#1877,#1879));
#1881=FACE_OUTER_BOUND('',#1880,.F.);
#1883=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-1.066008978981E0));
#1884=DIRECTION('',(0.E0,0.E0,-1.E0));
#1885=DIRECTION('',(1.E0,0.E0,0.E0));
#1886=AXIS2_PLACEMENT_3D('',#1883,#1884,#1885);
#1887=PLANE('',#1886);
#1888=ORIENTED_EDGE('',*,*,#1873,.F.);
#1890=ORIENTED_EDGE('',*,*,#1889,.F.);
#1892=ORIENTED_EDGE('',*,*,#1891,.F.);
#1894=ORIENTED_EDGE('',*,*,#1893,.T.);
#1896=ORIENTED_EDGE('',*,*,#1895,.T.);
#1898=ORIENTED_EDGE('',*,*,#1897,.T.);
#1900=ORIENTED_EDGE('',*,*,#1899,.T.);
#1902=ORIENTED_EDGE('',*,*,#1901,.F.);
#1903=ORIENTED_EDGE('',*,*,#1834,.F.);
#1905=ORIENTED_EDGE('',*,*,#1904,.T.);
#1906=EDGE_LOOP('',(#1888,#1890,#1892,#1894,#1896,#1898,#1900,#1902,#1903,
#1905));
#1907=FACE_OUTER_BOUND('',#1906,.F.);
#1909=CARTESIAN_POINT('',(0.E0,1.5E-1,0.E0));
#1910=DIRECTION('',(0.E0,-1.E0,0.E0));
#1911=DIRECTION('',(1.E0,0.E0,0.E0));
#1912=AXIS2_PLACEMENT_3D('',#1909,#1910,#1911);
#1913=PLANE('',#1912);
#1914=ORIENTED_EDGE('',*,*,#1878,.F.);
#1915=ORIENTED_EDGE('',*,*,#1863,.T.);
#1917=ORIENTED_EDGE('',*,*,#1916,.T.);
#1918=ORIENTED_EDGE('',*,*,#1889,.T.);
#1919=EDGE_LOOP('',(#1914,#1915,#1917,#1918));
#1920=FACE_OUTER_BOUND('',#1919,.F.);
#1922=CARTESIAN_POINT('',(1.222620776800E0,0.E0,-3.160089789808E-1));
#1923=DIRECTION('',(-1.E0,0.E0,0.E0));
#1924=DIRECTION('',(0.E0,0.E0,-1.E0));
#1925=AXIS2_PLACEMENT_3D('',#1922,#1923,#1924);
#1926=PLANE('',#1925);
#1928=ORIENTED_EDGE('',*,*,#1927,.T.);
#1929=ORIENTED_EDGE('',*,*,#1891,.T.);
#1930=ORIENTED_EDGE('',*,*,#1916,.F.);
#1931=ORIENTED_EDGE('',*,*,#1861,.F.);
#1932=EDGE_LOOP('',(#1928,#1929,#1930,#1931));
#1933=FACE_OUTER_BOUND('',#1932,.F.);
#1935=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1936=DIRECTION('',(0.E0,-1.E0,0.E0));
#1937=DIRECTION('',(1.E0,0.E0,0.E0));
#1938=AXIS2_PLACEMENT_3D('',#1935,#1936,#1937);
#1939=PLANE('',#1938);
#1941=ORIENTED_EDGE('',*,*,#1940,.F.);
#1942=ORIENTED_EDGE('',*,*,#1893,.F.);
#1943=ORIENTED_EDGE('',*,*,#1927,.F.);
#1944=ORIENTED_EDGE('',*,*,#1859,.F.);
#1945=EDGE_LOOP('',(#1941,#1942,#1943,#1944));
#1946=FACE_OUTER_BOUND('',#1945,.F.);
#1948=CARTESIAN_POINT('',(1.6E0,0.E0,-3.160089789808E-1));
#1949=DIRECTION('',(-1.E0,0.E0,0.E0));
#1950=DIRECTION('',(0.E0,0.E0,-1.E0));
#1951=AXIS2_PLACEMENT_3D('',#1948,#1949,#1950);
#1952=PLANE('',#1951);
#1954=ORIENTED_EDGE('',*,*,#1953,.T.);
#1955=ORIENTED_EDGE('',*,*,#1895,.F.);
#1956=ORIENTED_EDGE('',*,*,#1940,.T.);
#1957=ORIENTED_EDGE('',*,*,#1857,.T.);
#1958=EDGE_LOOP('',(#1954,#1955,#1956,#1957));
#1959=FACE_OUTER_BOUND('',#1958,.F.);
#1961=CARTESIAN_POINT('',(1.6E0,-7.5E-1,-3.160089789808E-1));
#1962=DIRECTION('',(0.E0,1.E0,0.E0));
#1963=DIRECTION('',(0.E0,0.E0,-1.E0));
#1964=AXIS2_PLACEMENT_3D('',#1961,#1962,#1963);
#1965=PLANE('',#1964);
#1966=ORIENTED_EDGE('',*,*,#1953,.F.);
#1967=ORIENTED_EDGE('',*,*,#1855,.T.);
#1969=ORIENTED_EDGE('',*,*,#1968,.T.);
#1970=ORIENTED_EDGE('',*,*,#1897,.F.);
#1971=EDGE_LOOP('',(#1966,#1967,#1969,#1970));
#1972=FACE_OUTER_BOUND('',#1971,.F.);
#1974=CARTESIAN_POINT('',(9.5E-1,0.E0,0.E0));
#1975=DIRECTION('',(-1.E0,0.E0,0.E0));
#1976=DIRECTION('',(0.E0,0.E0,-1.E0));
#1977=AXIS2_PLACEMENT_3D('',#1974,#1975,#1976);
#1978=PLANE('',#1977);
#1979=ORIENTED_EDGE('',*,*,#1853,.F.);
#1981=ORIENTED_EDGE('',*,*,#1980,.F.);
#1982=ORIENTED_EDGE('',*,*,#1899,.F.);
#1983=ORIENTED_EDGE('',*,*,#1968,.F.);
#1984=EDGE_LOOP('',(#1979,#1981,#1982,#1983));
#1985=FACE_OUTER_BOUND('',#1984,.F.);
#1987=CARTESIAN_POINT('',(0.E0,-9.E-1,0.E0));
#1988=DIRECTION('',(0.E0,-1.E0,0.E0));
#1989=DIRECTION('',(1.E0,0.E0,0.E0));
#1990=AXIS2_PLACEMENT_3D('',#1987,#1988,#1989);
#1991=PLANE('',#1990);
#1992=ORIENTED_EDGE('',*,*,#1836,.F.);
#1993=ORIENTED_EDGE('',*,*,#1901,.T.);
#1994=ORIENTED_EDGE('',*,*,#1980,.T.);
#1995=ORIENTED_EDGE('',*,*,#1851,.T.);
#1996=EDGE_LOOP('',(#1992,#1993,#1994,#1995));
#1997=FACE_OUTER_BOUND('',#1996,.F.);
#1999=CARTESIAN_POINT('',(1.75E0,0.E0,-1.066008978981E0));
#2000=DIRECTION('',(1.E0,0.E0,0.E0));
#2001=DIRECTION('',(0.E0,0.E0,1.E0));
#2002=AXIS2_PLACEMENT_3D('',#1999,#2000,#2001);
#2003=PLANE('',#2002);
#2004=ORIENTED_EDGE('',*,*,#1875,.T.);
#2005=ORIENTED_EDGE('',*,*,#1904,.F.);
#2006=ORIENTED_EDGE('',*,*,#1832,.T.);
#2007=ORIENTED_EDGE('',*,*,#1848,.F.);
#2008=EDGE_LOOP('',(#2004,#2005,#2006,#2007));
#2009=FACE_OUTER_BOUND('',#2008,.F.);
#2011=CLOSED_SHELL('',(#1840,#1867,#1882,#1908,#1921,#1934,#1947,#1960,#1973,
#1986,#1998,#2010));
#2012=MANIFOLD_SOLID_BREP('',#2011);
#2013=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2014=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2015=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2016=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2015);
#2017=(CONVERSION_BASED_UNIT('DEGREE',#2016)NAMED_UNIT(#2014)PLANE_ANGLE_UNIT(
));
#2018=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2019=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.507874213138E-4),#2013,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2021=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2022=DIRECTION('',(0.E0,0.E0,1.E0));
#2023=DIRECTION('',(1.E0,0.E0,0.E0));
#2026=MECHANICAL_CONTEXT('',#584,'mechanical');
#2027=PRODUCT('LF','LF','NOT SPECIFIED',(#2026));
#2028=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2027,.MADE.);
#2034=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2035=DIRECTION('',(0.E0,0.E0,1.E0));
#2036=DIRECTION('',(1.E0,0.E0,0.E0));
#2037=AXIS2_PLACEMENT_3D('',#2034,#2035,#2036);
#2038=ITEM_DEFINED_TRANSFORMATION('','',#2024,#2037);
#2039=(REPRESENTATION_RELATIONSHIP('','',#2025,#595)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2038)SHAPE_REPRESENTATION_RELATIONSHIP());
#2040=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2039,#2033);
#2041=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2042=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2043=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2044=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2043);
#2045=(CONVERSION_BASED_UNIT('DEGREE',#2044)NAMED_UNIT(#2042)PLANE_ANGLE_UNIT(
));
#2046=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2047=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.829920665739E-4),#2041,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2049=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2050=DIRECTION('',(0.E0,0.E0,1.E0));
#2051=DIRECTION('',(1.E0,0.E0,0.E0));
#2053=DESIGN_CONTEXT('',#584,'design');
#2054=MECHANICAL_CONTEXT('',#584,'mechanical');
#2055=PRODUCT('67-23B_ASM','67-23B_ASM','NOT SPECIFIED',(#2054));
#2056=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2055,.MADE.);
#2058=PRODUCT_CATEGORY('part','');
#2059=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#2055));
#2060=PRODUCT_CATEGORY_RELATIONSHIP('','',#2058,#2059);
#2061=PRODUCT_CATEGORY('part','');
#2062=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#588,#2027));
#2063=PRODUCT_CATEGORY_RELATIONSHIP('','',#2061,#2062);
#2064=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#2065=SECURITY_CLASSIFICATION('','',#2064);
#2066=CC_DESIGN_SECURITY_CLASSIFICATION(#2065,(#589,#2028,#2056,#596,#2032));
#2067=APPROVAL_STATUS('approved');
#2068=APPROVAL(#2067,'');
#2069=CC_DESIGN_APPROVAL(#2068,(#2065,#589,#2028,#2056,#590,#2029,#2057));
#2070=CALENDAR_DATE(113,24,10);
#2071=COORDINATED_UNIVERSAL_TIME_OFFSET(8,0,.AHEAD.);
#2072=LOCAL_TIME(9,0,6.E0,#2071);
#2073=DATE_AND_TIME(#2070,#2072);
#2074=APPROVAL_DATE_TIME(#2073,#2068);
#2075=DATE_TIME_ROLE('creation_date');
#2076=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#2073,#2075,(#590,#2029,#2057));
#2077=DATE_TIME_ROLE('classification_date');
#2078=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#2073,#2077,(#2065));
#2079=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#2080=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#2081=PERSON_AND_ORGANIZATION(#2079,#2080);
#2082=APPROVAL_ROLE('approver');
#2083=APPROVAL_PERSON_ORGANIZATION(#2081,#2068,#2082);
#2084=PERSON_AND_ORGANIZATION_ROLE('creator');
#2085=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2081,#2084,(#589,#2028,
#2056,#590,#2029,#2057));
#2086=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#2087=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2081,#2086,(#589,#2028,
#2056));
#2088=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#2089=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2081,#2088,(#2065));
#2090=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#2091=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2081,#2090,(#2055,#588,
#2027));
#169=CIRCLE('',#168,5.E-1);
#174=CIRCLE('',#173,5.E-1);
#191=CIRCLE('',#190,5.E-1);
#196=CIRCLE('',#195,5.E-1);
#266=EDGE_CURVE('',#199,#200,#4,.T.);
#268=EDGE_CURVE('',#200,#202,#8,.T.);
#270=EDGE_CURVE('',#202,#204,#12,.T.);
#272=EDGE_CURVE('',#204,#199,#16,.T.);
#276=EDGE_CURVE('',#223,#224,#20,.T.);
#278=EDGE_CURVE('',#224,#226,#24,.T.);
#280=EDGE_CURVE('',#226,#228,#28,.T.);
#282=EDGE_CURVE('',#228,#223,#32,.T.);
#286=ADVANCED_FACE('',(#275,#285),#265,.F.);
#292=EDGE_CURVE('',#217,#218,#36,.T.);
#294=EDGE_CURVE('',#213,#218,#40,.T.);
#296=EDGE_CURVE('',#213,#207,#88,.T.);
#298=EDGE_CURVE('',#200,#207,#68,.T.);
#301=EDGE_CURVE('',#199,#217,#44,.T.);
#305=ADVANCED_FACE('',(#304),#291,.T.);
#312=EDGE_CURVE('',#217,#220,#52,.T.);
#314=EDGE_CURVE('',#218,#220,#48,.T.);
#318=ADVANCED_FACE('',(#317),#310,.T.);
#327=EDGE_CURVE('',#204,#210,#56,.T.);
#329=EDGE_CURVE('',#210,#214,#76,.T.);
#331=EDGE_CURVE('',#214,#220,#60,.T.);
#335=ADVANCED_FACE('',(#334),#323,.T.);
#342=EDGE_CURVE('',#202,#208,#64,.T.);
#344=EDGE_CURVE('',#208,#210,#80,.T.);
#349=ADVANCED_FACE('',(#348),#340,.T.);
#357=EDGE_CURVE('',#207,#208,#84,.T.);
#362=ADVANCED_FACE('',(#361),#354,.T.);
#368=EDGE_CURVE('',#213,#214,#72,.T.);
#376=ADVANCED_FACE('',(#375),#367,.T.);
#388=ADVANCED_FACE('',(#387),#381,.F.);
#394=EDGE_CURVE('',#239,#240,#92,.T.);
#396=EDGE_CURVE('',#232,#240,#96,.T.);
#398=EDGE_CURVE('',#232,#236,#164,.T.);
#400=EDGE_CURVE('',#236,#242,#100,.T.);
#402=EDGE_CURVE('',#244,#242,#104,.T.);
#404=EDGE_CURVE('',#224,#244,#144,.T.);
#407=EDGE_CURVE('',#223,#239,#108,.T.);
#411=ADVANCED_FACE('',(#410),#393,.T.);
#418=EDGE_CURVE('',#249,#239,#112,.T.);
#420=EDGE_CURVE('',#249,#250,#120,.T.);
#422=EDGE_CURVE('',#250,#240,#178,.T.);
#426=ADVANCED_FACE('',(#425),#416,.F.);
#435=EDGE_CURVE('',#228,#249,#116,.T.);
#439=ADVANCED_FACE('',(#438),#431,.T.);
#448=EDGE_CURVE('',#226,#246,#124,.T.);
#450=EDGE_CURVE('',#246,#252,#128,.T.);
#452=EDGE_CURVE('',#235,#252,#132,.T.);
#454=EDGE_CURVE('',#235,#231,#156,.T.);
#456=EDGE_CURVE('',#231,#250,#136,.T.);
#460=ADVANCED_FACE('',(#459),#444,.T.);
#466=EDGE_CURVE('',#244,#246,#140,.T.);
#473=ADVANCED_FACE('',(#472),#465,.T.);
#480=EDGE_CURVE('',#252,#242,#148,.T.);
#486=ADVANCED_FACE('',(#485),#478,.F.);
#492=EDGE_CURVE('',#235,#236,#160,.T.);
#499=ADVANCED_FACE('',(#498),#491,.F.);
#505=EDGE_CURVE('',#231,#232,#152,.T.);
#512=EDGE_CURVE('',#259,#260,#169,.T.);
#514=EDGE_CURVE('',#260,#259,#174,.T.);
#518=ADVANCED_FACE('',(#511,#517),#504,.T.);
#530=ADVANCED_FACE('',(#529),#523,.F.);
#537=EDGE_CURVE('',#259,#255,#182,.T.);
#539=EDGE_CURVE('',#255,#256,#191,.T.);
#541=EDGE_CURVE('',#260,#256,#186,.T.);
#545=ADVANCED_FACE('',(#544),#535,.F.);
#553=EDGE_CURVE('',#256,#255,#196,.T.);
#558=ADVANCED_FACE('',(#557),#550,.F.);
#568=ADVANCED_FACE('',(#567),#563,.T.);
#578=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#577))GLOBAL_UNIT_ASSIGNED_CONTEXT((#571,#575,#576))REPRESENTATION_CONTEXT
('ID1','3'));
#582=AXIS2_PLACEMENT_3D('',#579,#580,#581);
#583=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#582,#570),#578);
#590=PRODUCT_DEFINITION('design','',#589,#586);
#591=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PPA.',#590);
#592=SHAPE_DEFINITION_REPRESENTATION(#591,#583);
#593=SHAPE_DEFINITION_REPRESENTATION(#594,#595);
#594=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 67-23B_ASM.',#2057);
#595=SHAPE_REPRESENTATION('',(#601,#2037,#2052),#2048);
#596=NEXT_ASSEMBLY_USAGE_OCCURRENCE('0','Next assembly relationship','PPA',
#2057,#590,$);
#597=PRODUCT_DEFINITION_SHAPE('Placement #0',
'Placement of PPA with respect to 67-23B_ASM',#596);
#609=CIRCLE('',#608,1.5E-1);
#618=CIRCLE('',#617,1.5E-1);
#623=CIRCLE('',#622,1.5E-1);
#640=CIRCLE('',#639,1.5E-1);
#774=EDGE_CURVE('',#766,#762,#618,.T.);
#776=EDGE_CURVE('',#764,#762,#728,.T.);
#778=EDGE_CURVE('',#764,#768,#640,.T.);
#780=EDGE_CURVE('',#768,#766,#712,.T.);
#784=ADVANCED_FACE('',(#783),#773,.T.);
#790=EDGE_CURVE('',#758,#760,#609,.T.);
#792=EDGE_CURVE('',#758,#762,#613,.T.);
#795=EDGE_CURVE('',#743,#766,#720,.T.);
#797=EDGE_CURVE('',#743,#744,#696,.T.);
#799=EDGE_CURVE('',#750,#744,#692,.T.);
#801=EDGE_CURVE('',#740,#750,#688,.T.);
#803=EDGE_CURVE('',#740,#731,#680,.T.);
#805=EDGE_CURVE('',#731,#735,#664,.T.);
#807=EDGE_CURVE('',#760,#735,#652,.T.);
#811=ADVANCED_FACE('',(#810),#789,.T.);
#817=EDGE_CURVE('',#755,#756,#623,.T.);
#819=EDGE_CURVE('',#758,#756,#724,.T.);
#822=EDGE_CURVE('',#760,#755,#648,.T.);
#826=ADVANCED_FACE('',(#825),#816,.T.);
#833=EDGE_CURVE('',#736,#755,#660,.T.);
#835=EDGE_CURVE('',#732,#736,#627,.T.);
#837=EDGE_CURVE('',#732,#739,#672,.T.);
#839=EDGE_CURVE('',#739,#752,#631,.T.);
#841=EDGE_CURVE('',#752,#746,#635,.T.);
#843=EDGE_CURVE('',#746,#748,#704,.T.);
#845=EDGE_CURVE('',#768,#748,#716,.T.);
#848=EDGE_CURVE('',#764,#756,#644,.T.);
#852=ADVANCED_FACE('',(#851),#831,.T.);
#860=EDGE_CURVE('',#735,#736,#656,.T.);
#865=ADVANCED_FACE('',(#864),#857,.F.);
#871=EDGE_CURVE('',#731,#732,#676,.T.);
#878=ADVANCED_FACE('',(#877),#870,.T.);
#884=EDGE_CURVE('',#739,#740,#668,.T.);
#891=ADVANCED_FACE('',(#890),#883,.T.);
#897=EDGE_CURVE('',#750,#752,#684,.T.);
#904=ADVANCED_FACE('',(#903),#896,.T.);
#911=EDGE_CURVE('',#744,#746,#708,.T.);
#917=ADVANCED_FACE('',(#916),#909,.T.);
#924=EDGE_CURVE('',#748,#743,#700,.T.);
#930=ADVANCED_FACE('',(#929),#922,.T.);
#942=ADVANCED_FACE('',(#941),#935,.T.);
#954=ADVANCED_FACE('',(#953),#947,.T.);
#961=CIRCLE('',#960,1.5E-1);
#966=CIRCLE('',#965,1.5E-1);
#975=CIRCLE('',#974,1.5E-1);
#988=CIRCLE('',#987,1.5E-1);
#1126=EDGE_CURVE('',#1118,#1116,#966,.T.);
#1128=EDGE_CURVE('',#1114,#1116,#1076,.T.);
#1130=EDGE_CURVE('',#1114,#1120,#988,.T.);
#1132=EDGE_CURVE('',#1120,#1118,#1056,.T.);
#1136=ADVANCED_FACE('',(#1135),#1125,.T.);
#1142=EDGE_CURVE('',#1110,#1112,#961,.T.);
#1144=EDGE_CURVE('',#1116,#1110,#1080,.T.);
#1147=EDGE_CURVE('',#1100,#1118,#1064,.T.);
#1149=EDGE_CURVE('',#1098,#1100,#1048,.T.);
#1151=EDGE_CURVE('',#1104,#1098,#970,.T.);
#1153=EDGE_CURVE('',#1091,#1104,#1032,.T.);
#1155=EDGE_CURVE('',#1091,#1083,#1024,.T.);
#1157=EDGE_CURVE('',#1083,#1087,#1008,.T.);
#1159=EDGE_CURVE('',#1112,#1087,#996,.T.);
#1163=ADVANCED_FACE('',(#1162),#1141,.T.);
#1169=EDGE_CURVE('',#1107,#1108,#975,.T.);
#1171=EDGE_CURVE('',#1110,#1108,#1068,.T.);
#1174=EDGE_CURVE('',#1112,#1107,#992,.T.);
#1178=ADVANCED_FACE('',(#1177),#1168,.T.);
#1185=EDGE_CURVE('',#1088,#1107,#1004,.T.);
#1187=EDGE_CURVE('',#1084,#1088,#979,.T.);
#1189=EDGE_CURVE('',#1084,#1092,#1016,.T.);
#1191=EDGE_CURVE('',#1092,#1102,#983,.T.);
#1193=EDGE_CURVE('',#1102,#1096,#1036,.T.);
#1195=EDGE_CURVE('',#1095,#1096,#1040,.T.);
#1197=EDGE_CURVE('',#1120,#1095,#1060,.T.);
#1200=EDGE_CURVE('',#1108,#1114,#1072,.T.);
#1204=ADVANCED_FACE('',(#1203),#1183,.T.);
#1212=EDGE_CURVE('',#1087,#1088,#1000,.T.);
#1217=ADVANCED_FACE('',(#1216),#1209,.F.);
#1223=EDGE_CURVE('',#1083,#1084,#1020,.T.);
#1230=ADVANCED_FACE('',(#1229),#1222,.T.);
#1236=EDGE_CURVE('',#1091,#1092,#1012,.T.);
#1243=ADVANCED_FACE('',(#1242),#1235,.T.);
#1249=EDGE_CURVE('',#1104,#1102,#1028,.T.);
#1256=ADVANCED_FACE('',(#1255),#1248,.T.);
#1265=EDGE_CURVE('',#1096,#1098,#1044,.T.);
#1269=ADVANCED_FACE('',(#1268),#1261,.F.);
#1278=EDGE_CURVE('',#1100,#1095,#1052,.T.);
#1282=ADVANCED_FACE('',(#1281),#1274,.F.);
#1294=ADVANCED_FACE('',(#1293),#1287,.T.);
#1306=ADVANCED_FACE('',(#1305),#1299,.T.);
#1313=CIRCLE('',#1312,1.5E-1);
#1318=CIRCLE('',#1317,1.5E-1);
#1327=CIRCLE('',#1326,1.5E-1);
#1340=CIRCLE('',#1339,1.5E-1);
#1478=EDGE_CURVE('',#1470,#1468,#1318,.T.);
#1480=EDGE_CURVE('',#1466,#1468,#1428,.T.);
#1482=EDGE_CURVE('',#1466,#1472,#1340,.T.);
#1484=EDGE_CURVE('',#1472,#1470,#1408,.T.);
#1488=ADVANCED_FACE('',(#1487),#1477,.T.);
#1494=EDGE_CURVE('',#1462,#1464,#1313,.T.);
#1496=EDGE_CURVE('',#1468,#1462,#1432,.T.);
#1499=EDGE_CURVE('',#1452,#1470,#1416,.T.);
#1501=EDGE_CURVE('',#1450,#1452,#1400,.T.);
#1503=EDGE_CURVE('',#1456,#1450,#1322,.T.);
#1505=EDGE_CURVE('',#1443,#1456,#1384,.T.);
#1507=EDGE_CURVE('',#1443,#1435,#1376,.T.);
#1509=EDGE_CURVE('',#1435,#1439,#1360,.T.);
#1511=EDGE_CURVE('',#1464,#1439,#1348,.T.);
#1515=ADVANCED_FACE('',(#1514),#1493,.T.);
#1521=EDGE_CURVE('',#1459,#1460,#1327,.T.);
#1523=EDGE_CURVE('',#1462,#1460,#1420,.T.);
#1526=EDGE_CURVE('',#1464,#1459,#1344,.T.);
#1530=ADVANCED_FACE('',(#1529),#1520,.T.);
#1537=EDGE_CURVE('',#1440,#1459,#1356,.T.);
#1539=EDGE_CURVE('',#1436,#1440,#1331,.T.);
#1541=EDGE_CURVE('',#1436,#1444,#1368,.T.);
#1543=EDGE_CURVE('',#1444,#1454,#1335,.T.);
#1545=EDGE_CURVE('',#1454,#1448,#1388,.T.);
#1547=EDGE_CURVE('',#1447,#1448,#1392,.T.);
#1549=EDGE_CURVE('',#1472,#1447,#1412,.T.);
#1552=EDGE_CURVE('',#1460,#1466,#1424,.T.);
#1556=ADVANCED_FACE('',(#1555),#1535,.T.);
#1564=EDGE_CURVE('',#1439,#1440,#1352,.T.);
#1569=ADVANCED_FACE('',(#1568),#1561,.F.);
#1575=EDGE_CURVE('',#1435,#1436,#1372,.T.);
#1582=ADVANCED_FACE('',(#1581),#1574,.T.);
#1588=EDGE_CURVE('',#1443,#1444,#1364,.T.);
#1595=ADVANCED_FACE('',(#1594),#1587,.T.);
#1601=EDGE_CURVE('',#1456,#1454,#1380,.T.);
#1608=ADVANCED_FACE('',(#1607),#1600,.T.);
#1617=EDGE_CURVE('',#1448,#1450,#1396,.T.);
#1621=ADVANCED_FACE('',(#1620),#1613,.F.);
#1630=EDGE_CURVE('',#1452,#1447,#1404,.T.);
#1634=ADVANCED_FACE('',(#1633),#1626,.F.);
#1646=ADVANCED_FACE('',(#1645),#1639,.T.);
#1658=ADVANCED_FACE('',(#1657),#1651,.T.);
#1665=CIRCLE('',#1664,1.5E-1);
#1674=CIRCLE('',#1673,1.5E-1);
#1679=CIRCLE('',#1678,1.5E-1);
#1696=CIRCLE('',#1695,1.5E-1);
#1830=EDGE_CURVE('',#1822,#1818,#1674,.T.);
#1832=EDGE_CURVE('',#1820,#1818,#1784,.T.);
#1834=EDGE_CURVE('',#1820,#1824,#1696,.T.);
#1836=EDGE_CURVE('',#1824,#1822,#1768,.T.);
#1840=ADVANCED_FACE('',(#1839),#1829,.T.);
#1846=EDGE_CURVE('',#1814,#1816,#1665,.T.);
#1848=EDGE_CURVE('',#1814,#1818,#1669,.T.);
#1851=EDGE_CURVE('',#1799,#1822,#1776,.T.);
#1853=EDGE_CURVE('',#1799,#1800,#1752,.T.);
#1855=EDGE_CURVE('',#1807,#1800,#1748,.T.);
#1857=EDGE_CURVE('',#1796,#1807,#1744,.T.);
#1859=EDGE_CURVE('',#1796,#1787,#1736,.T.);
#1861=EDGE_CURVE('',#1787,#1791,#1720,.T.);
#1863=EDGE_CURVE('',#1816,#1791,#1708,.T.);
#1867=ADVANCED_FACE('',(#1866),#1845,.T.);
#1873=EDGE_CURVE('',#1811,#1812,#1679,.T.);
#1875=EDGE_CURVE('',#1814,#1812,#1780,.T.);
#1878=EDGE_CURVE('',#1816,#1811,#1704,.T.);
#1882=ADVANCED_FACE('',(#1881),#1872,.T.);
#1889=EDGE_CURVE('',#1792,#1811,#1716,.T.);
#1891=EDGE_CURVE('',#1788,#1792,#1683,.T.);
#1893=EDGE_CURVE('',#1788,#1795,#1728,.T.);
#1895=EDGE_CURVE('',#1795,#1808,#1687,.T.);
#1897=EDGE_CURVE('',#1808,#1802,#1691,.T.);
#1899=EDGE_CURVE('',#1802,#1804,#1760,.T.);
#1901=EDGE_CURVE('',#1824,#1804,#1772,.T.);
#1904=EDGE_CURVE('',#1820,#1812,#1700,.T.);
#1908=ADVANCED_FACE('',(#1907),#1887,.T.);
#1916=EDGE_CURVE('',#1791,#1792,#1712,.T.);
#1921=ADVANCED_FACE('',(#1920),#1913,.F.);
#1927=EDGE_CURVE('',#1787,#1788,#1732,.T.);
#1934=ADVANCED_FACE('',(#1933),#1926,.T.);
#1940=EDGE_CURVE('',#1795,#1796,#1724,.T.);
#1947=ADVANCED_FACE('',(#1946),#1939,.T.);
#1953=EDGE_CURVE('',#1807,#1808,#1740,.T.);
#1960=ADVANCED_FACE('',(#1959),#1952,.T.);
#1968=EDGE_CURVE('',#1800,#1802,#1764,.T.);
#1973=ADVANCED_FACE('',(#1972),#1965,.T.);
#1980=EDGE_CURVE('',#1804,#1799,#1756,.T.);
#1986=ADVANCED_FACE('',(#1985),#1978,.T.);
#1998=ADVANCED_FACE('',(#1997),#1991,.T.);
#2010=ADVANCED_FACE('',(#2009),#2003,.T.);
#2020=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2019))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2013,#2017,#2018))REPRESENTATION_CONTEXT(
'ID2','3'));
#2024=AXIS2_PLACEMENT_3D('',#2021,#2022,#2023);
#2025=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2024,#956,#1308,#1660,#2012),
#2020);
#2029=PRODUCT_DEFINITION('design','',#2028,#586);
#2030=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LF.',#2029);
#2031=SHAPE_DEFINITION_REPRESENTATION(#2030,#2025);
#2032=NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','Next assembly relationship','LF',
#2057,#2029,$);
#2033=PRODUCT_DEFINITION_SHAPE('Placement #1',
'Placement of LF with respect to 67-23B_ASM',#2032);
#2048=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2047))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2041,#2045,#2046))REPRESENTATION_CONTEXT(
'ID3','3'));
#2052=AXIS2_PLACEMENT_3D('',#2049,#2050,#2051);
#2057=PRODUCT_DEFINITION('design','',#2056,#2053);
ENDSEC;
END-ISO-10303-21;